How do I create a recovery disk for MacBook Pro

I want to restore my MacBook Pro to it's factory setup

What didn't work?
Booting or restoring?
Cmd-R goes to the hard drive recovery partition.
Cmd-Opt-R goes to Internet Recovery and requires a WiFi network with WPA/WPA2 encryption (or an ethernet cable).
Are you using an external wireless keyboard?

Similar Messages

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imac

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 " or connect via thunderbolt to another imac
ann

You will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
Boot Using Command+R keys:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"COMMAND" and the "R" keys together.
3. Release the keys when the Utilities Menu appears.

How do I make a recovery disk for my Mac running 10.5.8?

How do I make a recovery disk for my Mac running 10.5.8?

Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Creating a recovery disk for windows 8

need to create a recovery disk for windows 8, on HP Pavilion g6-2238dx Notebook PC...getting error message because I unintentionally deleted part of the program... now it won't boot up... I get to a message that says...Windows restarted Unexpectedly or encountered an unexpected error. Windows install cannot proceed, click ok . When I do that the program restarts... it repeats the process over and over... Any Suggestions?
THank you

Try tapping away at the F11 key immediately after powering on the laptop to get into HP Recovery Manager which can be used to do a System Recovery back to Factory settings.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
A.:
1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
3. Click on "Next" to continue.
4. Click on "Advanced".
5. Click on "Create an ISO file for the recovery disc".
6. Select the destination where you want to create the ISO files. (Default is the D: drive)
7. The program will now create the ISO files. This process may take up to 20 minutes.
8. Click on "Finish". Make sure the box is unchecked.
9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
11. After burn is complete, click on "Close".
12. Double-click the recovery_dvd2 file.
13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to i purchase a recovery disk for window 7

how to i purchase a recovery disk for window 7

Hi:
Please read this info on the link below for how to order recovery disks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&lc=en&cc=us&dlc=en
Paul

How do I create more room on my MacBook Pro so I can install Snow Leopard? It says it needs 5GB and I have 4.something.

How do I create more room on my MacBook Pro so I can install Snow Leopard?
I've only got 4.something GB left and it says it needs 5 GB?
Which then begs the question, will I be able to do anything with the computer.
I think I need to get some stuff off, but do not know where to look up what is taking up the most room.
I have an extra hard drive.
I have iDisk.
I have a Time Machine, but it backs up one of my three Macs.
Thanks.

A utility like GrandPerspective is a good one for seeing what is taking up space on your hard drive.
Video and photo files tend to take up a lot of room.

How can I get a recovery disk for Satellite P300-1CI?

Hi everybody,
first, sorry for my english, I'm a belgian and I speak french.
Yesterday I bought a toshiba Satellite P300-1CI, when I started, I must installed Vista home.
I would like to format my disk and reinstall my old Windows XP.
My question is : How can keep an image disk with Vista? I don't have an installation disk of Vista and don't know my registration key of it.
How can I have a recovery disk ?
Can you help me please.
PS : Sorry for my english

Hi mate
User manual is really interesting document and in most cases it answer all you questions ;)
Anyway, the Toshiba recovery disk should be created before you would format and install on the HDD.
You have to use the preinstalled Toshiba Recovery Disk Creator application in order to create the Recovery DVD.
Now to you other question;
The Vista image which is preinstalled and placed on the Recovery disk (after recovery disk has been created) is activated already and you dont need to insert any keys or activate anything.
Greets

How to make boot disk for MacBook Pro with Mavericks pre-installed

Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
Shelly

Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

How to create restore cd or recovery cd for macbook pro

how to create a recovery cd or factory cd of macbook pro

There is no factory CD/DVD for OS X. You can create such an animal, however:
Managing the OS X 10.7 Lion restore drive | MacFixIt - CNET Reviews
OS X- About Recovery Disk Assistant
OS X Recovery Disk Assistant v1.0
You will need a 2 GB USB flash drive partitioned GUID and formatted Mac OS Extended, Journaled.
If you wish to make a bootable installer:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
    Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
    Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
    the copy into your Downloads folder. Now you can click on the Install button. You
    must do this because the installer deletes itself automatically when it finishes
    installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
a. Open Disk Utility in your Utilities folder.
b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
      side list. Click on the Partition tab in the DU main window.
c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.
      Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
      the process has completed.
d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
      list. Click on the Erase tab in the DU main window.
e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
      button for Zero Data and click on OK to return to the Erase window.
f. Click on the Erase button. The format process can take up to an hour depending upon the flash
     drive size.
3. Use Lion DiskMaker 2.0 to put your installer clone onto the USB flash drive.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How do u creat BIOS recovery disk + nvidia firewall question.

WooooHOoOOO....
after re-formating a dozen times, busted SCSI config, messed up driver install, I FINALLY GOT this board working at 100%!!!
This mobo powered through my entire DOOM 3 Odyssey to Hell NON-STOP without a SINGLE CRASH!! Definitely a good testament to this board's quality.
Now for the final few noob question, how do I create a bios recovery disk just in case things happened.
lastly... how do you properly setup the NV Firewall? After enabling it, none of the other computers in my network can see this computer with the MSI Board, so file and printer sharing all stops when the firewall is enabled.
Anyone here has a walkthrough on the firewall?
ONCE AGAIN...thanks to all who helped me!!!

i havent got my nvidia firewall to work imma wait until they release better drivers for it but for creating the bios recovery disk i think if u use msi's live update it will ask u if u want to create one or not.

Need OS disk for macbook pro mid 2010

The hardest part of holding on is letting go. This is how I feel about my MacBook pro mid 2010 edition. I have been having issues with it so I neglected it for some time. I put in a new hard drive and then installed Yosemite. It runs a little slow but works great for Netflix and other non required uses. The problem I am having is that the processor pegs at 100% randomly. I don't see anything under the monitor using the cpu so I am wondering if I have a hardware issue. When I hold down the D key at bootup I thought it would start diagnostics but it doesn't. My research tells me I need to install the original os but I can't find the disk.
Thoughts?

Niel,
See if you can help this person: MacBook Pro late 2011 won't start up.

How do I create ringtones in iTunes on Macbook Pro?

I used to create my ringtones on my old laptop which was a windows, and I tried doing it on my macbook, but they don't go as ringtones..
Is there a different way to do so on mbp than windows?
I don't wanna have to keep getting out the old windows to do it every time?
Thanks in advance for the help!

Your MacBook Pro should have an application called GarageBand. Its icon looks like a guitar in your dock. Open GarageBand, go to "Help" in the menu bar, and type Create an iPhone Ringtone. It will walk you through what to do.

Hard disk for macbook pro

i want to increase my storage for my macbook pro. i dont know which one to use, either external oone or internal one. i would prefer an internal one. but i am afraid if my macbook (released mid 2010, 4GB RAM,duo core processor,250GB hard disk) will support 1TB storage. Please help me out through this.

I have the same laptop - a mid 2010 i5 MBP. For additional storage I removed my superdrive that rarely got used and installed a 2nd HDD in a caddy designed to replace the optical drive. I now have a SSD for my boot drive and a HDD for file storage - and the superdrive is now in a usb external case for the rare times I need it. I love this setup becasue I get the best of both worlds.

Startup Disk for MacBook Pro with OS X Pre-installed

I have a 15" MacBook Pro with Intel Core Duo. I am running OS X 10.4.8.
Since OS X is preinstalled, how do I get a startup disk, in case I need to reinstall the OS? I have a Tiger 10.4 disk, but can't use it as a start up disk, I assume because of the Intel issue.
Can anyone help?
Thanks...
Preston
15" MacBook Pro 2GHz Intel Core Duo Mac OS X (10.4.8)

All you need is the Installation DVDs that came in the box.

How do I create a recovery disk for MacBook Pro

Similar Messages

Maybe you are looking for