How do I create a recovery partition on an HP EliteBook 2760p using Windows 7 64-bit Professional

I have an HP EliteBook 2760p using Windows 7 - 64-bit Professional
My original problem is that I couldn't create the Repair Disc
I found out that the problem was with a file that was on the recovery partition
I backed up the recovery partition from the same make and model computer
I reformatted the partition and recovered the backup to the reformatted partition
It didn't work
How do I create the recovery partition I have the 2 disks that came with the tablet PC

If you do a factory restore using HP recovery discs it will put everything back including recovery partition. I don't know if any way to manually re-create the recovery partition.
NOTE: back up your files as Factory Restore wipes ALL data.

Similar Messages

How do I create 2 Recovery partitions: one for Lion and one for Mountain Lion?

Well that is basically the question:
How do I create 2 recovery partitions: one for Lion and one for Mountain Lion?
Reason is that I would like to keep the option to return to Lion, or even better, have a seperate partition for eacht?

can I access my programs from the other partition, so I can save space ...
No, as far as I know, each one is completely separate - especially if you're dealing with two different versions of OS's.
is it possible to safely make an extra partion on a running drive (it is my main computer ...) The disk is large enough ...
how large would this have to be
I've personally never done it on a running drive - have read it's possible, but don't want to suggest it since I've never done it and wouldn't be sure about the steps. This is how I got to two partitions on my iMac:
Originally, I had just one partition with Snow Leopard. I used CCC to clone that to an external drive. Booted into that drive and used DU to partition and erase the internal. I then cloned the new clone back. Also cloned the same thing to the other partition which I then upgraded to Lion. So I had two OS's - SL and Lion. I've now decided to clone my SL to an external drive for occasional use and installed ML on that partition - so now I have Lion and ML.
There are two ways to get a "fresh" install: either download the OS again and install it on a partition of your choice or, as I've done as well, copy the installer to a safe place so you don't need to download it again. It does include whatever apps/software is included in the OS. I've designated two smaller partitions on externals as my "fresh" installs of both Lion and ML for emergency or reinstall purposes (this is my way of dealing with not having install DVDs) - I took the time to install it there and then slowly add fresh installs of my important apps (either via download or install CD) - don't bother with the little/less used stuff, a current copy of that can be downloaded if and when I need it. I don't really update those two - that can also be done if/when I need it since that'll always change.
So, yesterday, I decided I wanted to start fresh with ML - booted into my fresh install of Lion (on external), wiped the SL partition on my internal and installed Lion. Decided to download a fresh copy of the ML installer and installed that. Then ran Software Update. After that, repaired permissions. Then I methodically opened every third party app and checked for updates - installed those where necessary. After all that, I simply copied (drag 'n drop) my entire Documents folder (which contains all my important data,, photos, etc) over from another backup.
This took a while, but mostly because of the long download times; the installs weren't all that bad. I should be running a really clean system now, especially since nothing was ported over except my Documents folder.

How can I create a recovery partition to use Find my Mac?

I want to activate Find my Mac on my MBP. The iCloud system preference says I don't have a recovery partition that's required for it. It apparently didn't install when I upgraded to Mountain Lion.
How can I retroactively create a recovery partition? There are no other partitions on the drive (other than the Macintosh HD, of course).
Thanks.
Rob

FIRST, assuming you do not have another Mac of the same model with a working restore, I would suggest using your Lion, mountaint lion or Maverick install to create a bootable system on a flash drive. You will need a DMG image created with Disk Utility from that stick to recreate the restore partition on your mac.
Once you create the bootable USB stick, Use it to log in and follow the below process to back up the restore partition. Then, save the DMG back up anywhere and finish the walk through on your normal operating partition.
Close Disk Utility if it is open.
Open Terminal
Enter the command below
defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool true
Now open Disk Utility and pull down the Debug menu
Click Show Every Partition
Now, select the Recovery Partition and create a new image.
NOTE: The Recovery Partition will need to be made in Read Only format if you wish to restore the image normally with disk utility or by software such as Deploy Studio. If you take an image with Deploy Studio and want it to restore the Recovery Drive normally, you will need to adjust the Work Flow for Image Capture to use the Read Only format. It will slow things down. If you dont use the read only format, the .dmg will not scan properly. This is most likely because the recovery drive already hosts compressed files. That said, this guide WILL restore from even a compressed .dmg image. HERE IS THE WALK THROUGH FOR RESTORING A SCANNED READ ONLY FORMATTED .DMG.
Copy the Recover HD.DMG image to a flash drive
The following must be on an Administrator account
Next, Log on to the admin account of the computer you wish to restore the MLTI Recovery Partition.
Copy the Recovery HD.DMG from your Flash drive to the HD
Enter the following command in terminal
diskutil list
If there is no partition for the restore drive listed, then use Disk Utility to create a GUID Partition keeping in mind the size of the original restore partition. (19 gigs for the MLTI Version of the restore drive)
Open Terminal and enter the following command
sudo asr -noverify -source (PATH FOR DMG IMAGE HERE) -target (PATH FOR RECOVERY HD PARTITION HERE) -erase -noprompt
NOTES: You must replace the () and everything in between with the respective path. You can simple drag and drop the source (your .dmg) and your target (the drive to be restored) while you are typing in terminal.
Enter admin password
In terminal Type the following command
diskutil list
note which disk and slice is the restore partition. It should be /dev/disk0s3, but it could vary a bit.
Now, run the following in terminal
sudo asr adjust --target /dev/disk0s3 --settype "Apple_Boot"
REMEMBER: you may need to replace /dev/disk0s3 with your new restore partition's designation.
Enter Admin Password when prompted
Restart.
Don't forget to enter the following terminal command into the machine you took the Recovery HD image from.
defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool false

How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
A.:
1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
3. Click on "Next" to continue.
4. Click on "Advanced".
5. Click on "Create an ISO file for the recovery disc".
6. Select the destination where you want to create the ISO files. (Default is the D: drive)
7. The program will now create the ISO files. This process may take up to 20 minutes.
8. Click on "Finish". Make sure the box is unchecked.
9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
11. After burn is complete, click on "Close".
12. Double-click the recovery_dvd2 file.
13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I create a recovery partition when restoring from Time Machine?

I am planning to replace the HDD in my Macbook Pro with an SSD. I've used Time Machine to backup my HDD (running Mountain Lion) but am trying to find the best way to restore my Time Machine backup to the new SSD once installed.
Given that the new SSD will not have a bootable OS X Recovery partition, I have created a bootable OS X Recovery drive on a USB thumb drive using OS X Recovery Assistant.
In order to ensure that the new SSD has the OS X Recovery parition, should I:
(1) reinstall Mountain Lion on the SSD then recover my data from Time Machine; or
(2) can I simply use the Restore from Time Machine option in OS X Recovery to do it all at once.
I can't seem to work out whether option (2) will create the OS X Recovery partition on the new SSD or just recover the system partition.

Turns out the OS X Recovery partition is only created on a fresh install of OS X. Restoring via Time Machine will not do the trick.

How to make a new recovery partition on a 600 series

Well I thought this was worth a mention as nobody seems to have said it could be done.
Having just got the cheep 600 series unit working I wanted to restore the RESTORE PARTITION.
Mostly to get the F11 function working as it should after fitting a Brand new HDD.
The OS is WIN7x64 but I would guess the same could be said for others.
It is actually quite simple and perhaps has been described in better detail elsewhere but here we go.
Oh, I actually did this a few different ways and got some very interesting results,
including one that needed the F11 pressing before boot or it would fail to load windows after the recovery.
Nice little hidden security function.! But breaks the restore ability !!!
If you want to disable the F11 recovery option then you need to rename a file.
Perhaps not disable but MakeFail !
So the way it seemed to work goes like this.
You will need your Original Restore DVD's (Cd's) for this if I did not assume that already.
With your new hard disk you need to partition it into three parts.
Either do it in the machine with a bootdisk (BartsPE) or similar
or for quickest results pop the drive into a caddy and do it on a live machine.
If you need to be told how to partition the disk then ask. (Right click My Computer, select Manage)
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
NOTICE: >> THIS IS GOING TO DESTROY ANY DATA ON THAT DRIVE ...
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
Make these in order.
partition 1 = 100 meg PRIMARY, UNFORMATTED, NO LABEL, NO DRIVE LETTER.
partition 2 = ??? PRIMARY, UNFORMATTED, NO LABEL, NO DRIVE LETTER
(calculate size from remaining space less partition3 size)
partition 3 = PRIMARY, NTFS, ANY LABEL, ANY DRIVE LETTER.
(This needs to be large enough for ALL your recovery disks plus a little more.)
So if you only have one Restore DVD make the third partition about 5gigs.
If you have two 10 gigs and 3Dvd's perhaps 14 or 15 Gigs.
Add some more space if you want to store more stuff on that partition.
Format the 3rd partition, then copy in order ALL the restore disks to the NEW drive.
You can also copy other files to this partition if you want.
Best to keep it tidy and make a new folder for your own stuff.
Stuff like AV installers, Updates, Application installers.
The Recovery process will HIDE ALL folders on the recovery drive but they will still be there.
So that should be it.
You have got 3 partitions?,
You copied all the DVD's to the 3rd one,?
NOW..
Reinstall the drive to the machine.
Put in the "Recovery 1 DVD" and boot the machine.
When asked if you want to use the recovery from disk or harddrive,, select DVD Disk.
Once the install is complete the F11 button on bootup should now work error free.
Well ,, it did for me...
Brand new hard drive with a full system recovery option made from only the Restore DVD's.
I did another system restore via the F11 button just for the fun of it.
Just so you know the system restore takes less than a quarter of the time from HDD over DVD.
I was going to check the process of making another NEW set of DVD recovery disks from the NEW drive,
but perhaps someone else will do that and report back on their progress.
Hv.
I never knew who HP were until my workshop got filled with faulty equipment. !! I know who Apple are now too.

Depending on the software you use to clone will it copy the recovery partition or not ex SuperDuper does not.
You can always reinstall the OS on top of what you have. This will re-create the recovery partition without touching your user files, documents, photos, bookmarks etc. After that you may have to run the software update to get the latest OSX update 10.10.1
One draw back to no recovery partition is iCloud>Find my Mac will not be functional.
From option command R on start or from an installer SD card you created.
Recovery http://support.apple.com/kb/HT4718

How can I undo Converting Recovery Partition to Logical Drive (Oops...) - HP G62-b32sa???

I needed to create a new partition, but to do that Easeus Partition Master 9.00 Home Edition (I like using this compared to the Windows one..) stated that I needed to convert one of the 4 pre-made partitions from Primary to Logical. The following partitions were pre-made with my laptop, HP G62-b32SA, all of which were Primary:
*: SYSTEM
C:
D: RECOVERY
*: HP_TOOLS
I could only convert the "D: Recovery" to Logical, so I went ahead, and then could create a new partition. But now after reading several post on this Forum, I realised what a mistake that was. I found that that converting the Recovery partition to Logical renders it useless... "Oops" I said. Now I wonder that if I convert the Recovery partition back to Primary, will I be able to use it again, or has the damage been done? But then the other problem is that it won't allow me to convert the Recovery Partition back to Primary, claiming "there are no free MBR slots". Also, I have a feeling that I'll have to delete my newly created partition to convert the Recovery partition back to Primary, but then how do I create a new partition without converting any of the existing to Logical? Endless questions, I know. So now I ask, what is the best thing to do??
BTW this is my first HP Laptop...
This question was solved.
View Solution.

How to handle this situation, back up your personal data and use the HP Recovery Discs to restore the PC
Make your recovery discs now, use good quality DVD+R media
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01867124
Once you are back to normal partitions, see this thread on how to make another partition without damaging the other 4
http://h30434.www3.hp.com/t5/Other-Notebook-PC-questions/How-to-repartition-HDD-of-HP-notebook-with-...

Creating a recovery partition

Hi,
Can i create a recovery partition like the ones in the laptop of HP. If so please explain how to do it if not please can you point me to the right direction.
Thank you.

Hi,
Sadly to say, you need to replace the HDD in your machine. Hope you can retrieve your data from it. There are few tips and instructions how to replace a dead HDDon the Internet, here are few of them:
http://www.youtube.com/watch?v=wRkFDFguT5A
http://www.techsupportforum.com/forums/f6/new-hard-disk-installation-to-replace-dead-disk-however-34...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I create a new partition to install Windows 7 by not using Bootcamp

How can I create a new partition to install Windows 7 by not using Bootcamp?

If you want to dualboot you have to use boot camp i think. I think you have already a full disc and cannot make another partition I'm I right?
Your question seems a bit blurry so I'm giving you a general tip here.
If you want to just try the beta you can always use Sun's "Virtualbox".

How do you update the recovery partition to 10.8.2 instead of 10.8.1

I installed MT 10.8.1 and then I updated to 10.8.2 how do I updated the recovery partition to the latest release?

If the recovery partition needed updating, it would have been updated with the update.
The OS installer isn't on the Recovery HD, if that is what you are thinking.

How do I create an app from my Adobe pdf forms to use on any mobile device as well as windows and ios?

How do I create an app from my Adobe pdf forms to use on any mobile device as well as windows and ios? I have all the apps in Creative Cloud by the way.

If you already purchased it with the same Apple ID, then you will not be re-charged.

Help! How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?

I am a new Indesign user and I have been working with GIMP for the last year creating single colour print-ready PDFs. But now I need to create a document with a FOGRA27 CMYK colour profile and a resolution of at least
How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?
I can import the PDF by creating a new document and finding the PDF in places, but it's bad quality.
The only colour profile I can find under View - Proof Setup is FOGRA39, but I need FOGRA27!
Help help help, I need to get these files printed in two days!
Thanks so much..
xx

Proof Colors doesn't change the file's color management, it just lets you see what the color values would look like if they are printed unchanged on different output devices. If you want to actually convert the color from one CMYK space to another, it's probably better to do that in Acrobat—Tools>Print Production>Convert Colors.
There's very little difference between Fogra27 and Fogra39—Fogra27 allows more total ink 350 vs. 330.
There's nothing you can do to improve the quality of low res images

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

Hi Ed
Thank you for contacting me, however I already know how to save text to
audio files via timeline using the Export feature.
So my question was not entirely clear and I apologize for that. To explain
further, whenever I save a text to audio file, captivate takes me to a
default save as folder where I then have browse back to my production
folder where I am keeping all my Txt to Aud files. This is very tedious
process when you have alot of files to save. So my question was is there a
way to configure captivate so I can make my production folder the default
file for whenever I save a Txt to Audio file through Export feature that
the system automatically takes me to that production folder, and I am
spared the long tedious process of saving the file manually to the
prodcution folder I want.
I have copy the pathway to the production folder in the URL filed in the
Save As dialoge box and that workaround as cut the work down but I still
have to paste that URL field to point the file to the right folder. So it
would be nice if I could do everything automatically. Microsoft makes this
capability in their MS Office applications, so I was thinking Adobe might
do the same thing. Your help with this would be appreicated,
Thanks
Merrill Roberts
Sr. Training Specialist
SunGard Availability Services
Direct 925-831-7730
Mobile:415-215-9280

HT201394 I just updated my iPhone 4s to iso 8.2 How do I create a pass code to open my phone without using my password every time?

I just updated my iPhone 4s to iso 8.2 How do I create a pass code to open my phone without using my pass word every time?

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

HT4718 No 1. I can not activate Filevault : FileVault can't be turned on for the disk "Macintosh HD". Some disk formats don't support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted

I have TWO PROBLEMS
No 1. I can not activate FileVault. It displyas as follows :
FileVault can’t be turned on for the disk “Macintosh HD”.
Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk.
No 2. I can not activate Find My Mac service. It displays as follows :
Find My Mac requires a recovery partition
Some configurations, such as software or hardware RAID, do not support a recovery partition and can't be used with find my mac

Restart holding down the option/alt key and see if you have a Recovery Volume.
Recovery Partition – Recreate Without Reinstalling
Recovery Partition – Recreate Without Reinstalling (Requires Installer)
Recovery Drive – Restore Missing
Recovery Disk Assistant

How do I create a recovery partition on an HP EliteBook 2760p using Windows 7 64-bit Professional

Similar Messages

Maybe you are looking for