How do I create a shared library from iPhoto when the file is too large to burn on DVD?
I need to remove some photos (70 GB) to relieve a full hard drive. I have exported and burned .jpg images on DVDs, but that is only useful as a worst case backup. What I would like to have is a separate iPhoto Library for each calendar year of photos, so I could still view them in the albums and folders I have created to organize them. I have done this before in an earlier version of iPhoto, and was able to create 2003 iPhoto Library, 2004 iPhoto Library, etc. I put a copy on DVD (the full year fit on 1 DVD) and another copy on an external drive.
I am having problems doing this with iPhoto '09 (version 8.1.2). The iPhoto library for each year is too large to burn on DVD. When I select certain albums from the year that will fit on DVD and use the Share>Burn commands, it creates a library with Events and Faces, but none of the albums are listed on the left. The albums are important to organize the photos for viewing (birthdays, vacations, holidays, etc.) I didn't always pay attention to labeling Events when I imported photos, so that is not an adequate alternative to my albums.
I was thinking that if I could create a library for the entire year, it might include my albums and folders. I would have space for this on my external hard drive. However, I can find no way to create a library for the entire year and put it on my external drive - the only option is to burn a DVD or export .jpg images.
Any suggestions would be appreciated.
Best suggestion: Buy some external USB or Firewire drives. Move your Library to one, back it up to another. A lot more reliable than DVD, a lot less work and much more convenient. For a start, you don't have to break up the library...
Regards
TD
Similar Messages
-
how do I create a slide show from iphoto and export/send slide show within an email/, how do I create a slide show from iphoto and export/send slide show within an email/
You don't.
Slideshows are exported as movies and these are very large files. Email is not an appropriate medium for very large files as they can cause immense issues for the receiver.
Better to share some other way.
Regards
TD -
How do I download previously purchased albums from iTunes when the album has either disappeared from my computer or the tunes are not playable? The albums show as purchased on the iTunes store, but not available to download to my authorized device. I also have albums that appear in my library, but are not able to be added to my iPod from my computer
When you download something from the iCloud, it is a brand new licensed copy. Your iCloud account just contains a notation that you have this app. It isn't storing an actual copy of the app from your Mac.
-
How can I order two different calendars from iPhoto in the same order?
How can I order two different calendars from iPhoto in the same order?
You cannot - the "Buy Calendar" button is only available, while viewing one calendar. You can order more than one copy of the same calendar on one order, however.
-
How do I create a slide show within iPhoto using the flagged photos?
How do I create a slide show within iPhoto using the flagged photos?
Select them, create an album (You do9 not absolutely have to create teh albume but it will make life easier), select them and create a slide show form them
LN -
How can I cancel or delete a movie I tried to download to my iPhone? The file is too large and iTunes is hung up during the process of downloading. I've tried to swipe from right to left but that doesn't produce a delete button....
Slide your finger across the videos' listing in your iPhone Videos App and tap the red "Delete" button that appears.
-
How can I insert a number of photos in a numbers doc without the file becoming too large?
How can I insert a number of photos into a numbers doc without the file becoming too large?
Use smaller photos.
Seriously, reduce the file size of the photos in Preview, PhotoShop, iPhoto or other application before inserting tehem into the Numbers document.
Regards,
Barry -
I placed my aperture library on a 1 TB external drive (the file is 300 GB) and Aperture churns and churns but will not open the file. I don't know if the file is too large or if it is the external drive or what? any ideas? Smaller files will open. This is very annoying.
If this is an external USB drive, you must understand that USB is really, really slow. There may be nothing wrong except for that.
In my opinion, USB external drives are only acceptable for backups, and to get "near Hard Drive" performance, you need FireWire. -
I tried sending an Adobe pdf file of a poster via email and it wouldn't go through because it said the file was too large. How do I remedy this?
Lots of free file hosters out there. Mediafire.com as an example. Upload a file there, copy and paste the download link you are given into your email to the client, then delete it as soon as the client successfully downloads it. Mediafire has 10 gb storage for free accounts.
Email is limited to 10 MB on attachments. So that's where file hosting comes in. -
I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Cheers, Tom -
How To Get rid of Exponential format in datagridview when the number is very large
When the number is very large like :290754232, I got 2.907542E +08. in datagridview cell
I using vb.net , framework 2.0.
how can I get rid of this format?
Thanks in advanceshould I change the type of this column to integer or long ?
The datagridview is binded to binding source and a list ( Of).
Mike,
I'll show you an example that shows the correct way to do this and a another way if you're stuck using strings in exponential format. The latter being the "hack way" I spoke about Friday. I don't like it, it's dangerous, but I'll show both anyway.
In this example, I'm using Int64 because I don't know the range of yours. If your never exceeds Int32 then use that one instead.
First, I have a DataGridView with three columns. I've populated the data just by creating longs starting with the maximum value in reverse order for 100 rows:
The way that I created the data is itself not a great way (there's no encapsulation), but for this example "it'll do".
Notice though that the third column (right-most column) isn't formatted at all. I commented out the part that does that so that I could then explain what I'm doing. If it works, it should look like the first column.
The first column represents an actual Int64 and when I show the code, you can see how I'm formatting that using the DGV's DefaultCellStyle.Format property. That's how it SHOULD be done.
The third column though is just a string and because that string contains a letter in it, Long.TryParse will NOT work. This is where the "hack" part comes in - and it's dangerous, but if you have no other option then ...
You can see that now the third column matches the first column. Now the code:
Option Strict On
Option Explicit On
Option Infer Off
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
With DataGridView1
.AllowUserToAddRows = False
.AllowUserToDeleteRows = False
.AllowUserToOrderColumns = False
.AllowUserToResizeRows = False
.AlternatingRowsDefaultCellStyle.BackColor = Color.Aquamarine
.ReadOnly = True
.SelectionMode = DataGridViewSelectionMode.FullRowSelect
.MultiSelect = False
.RowHeadersVisible = False
.RowTemplate.Height = 30
.EnableHeadersVisualStyles = False
With .ColumnHeadersDefaultCellStyle
.Font = New Font("Tahoma", 9, FontStyle.Bold)
.BackColor = Color.LightGreen
.WrapMode = DataGridViewTriState.True
.Alignment = DataGridViewContentAlignment.MiddleCenter
End With
.ColumnHeadersHeightSizeMode = DataGridViewColumnHeadersHeightSizeMode.DisableResizing
.ColumnHeadersHeight = 50
.DataSource = Nothing
.Enabled = False
End With
CreateData()
End Sub
Private Sub CreateData()
Dim longList As New List(Of Long)
For l As Long = Long.MaxValue To 0 Step -1
longList.Add(l)
If longList.Count = 100 Then
Exit For
End If
Next
Dim stringList As New List(Of String)
For Each l As Long In longList
stringList.Add(l.ToString("e18"))
Next
Dim dt As New DataTable
Dim column As New DataColumn
With column
.DataType = System.Type.GetType("System.Int64")
.ColumnName = "Actual Long Value (Shown Formated)"
dt.Columns.Add(column)
End With
column = New DataColumn
With column
.DataType = System.Type.GetType("System.String")
.ColumnName = "String Equivalent"
dt.Columns.Add(column)
End With
column = New DataColumn
With column
.DataType = System.Type.GetType("System.String")
.ColumnName = "Formated String Equivalent"
dt.Columns.Add(column)
End With
Dim row As DataRow
For i As Integer = 0 To longList.Count - 1
row = dt.NewRow
row("Actual Long Value (Shown Formated)") = longList(i)
row("String Equivalent") = stringList(i)
row("Formated String Equivalent") = stringList(i)
dt.Rows.Add(row)
Next
Dim bs As New BindingSource
bs.DataSource = dt
BindingNavigator1.BindingSource = bs
DataGridView1.DataSource = bs
With DataGridView1
With .Columns(0)
.DefaultCellStyle.Format = "n0"
.Width = 150
End With
.Columns(1).Width = 170
.Columns(2).AutoSizeMode = DataGridViewAutoSizeColumnMode.Fill
.Enabled = True
End With
End Sub
' The following is what I commented
' out for the first screenshot. ONLY
' do this if there is absolutely no
' other way though - the following
' casting operation is NOT ADVISABLE!
Private Sub DataGridView1_CellFormatting(ByVal sender As Object, _
ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) _
Handles DataGridView1.CellFormatting
If e.ColumnIndex = 2 AndAlso e.Value.ToString IsNot Nothing Then
' NOTE! The following is dangerous!
' I'm going to use coercion to force the
' string into a type long. TryParse will
' NOT work here. This can easily throw an
' exception if the string cannot be cast
' to a type long. I'm "depending on" the
' the string to cast. At the very least
' you might put this in a Try/Catch but
' that won't stop it from failing (if
' it doesn't work).
Dim actualValue As Long = CType(e.Value.ToString, Long)
Dim formattedValue As String = actualValue.ToString("n0")
e.Value = formattedValue
End If
End Sub
End Class
Like I said, only use that hack way if there's no other option!
I hope it helps. :)
Still lost in code, just at a little higher level. -
How do I create a downloadable link from an Interactive PDF file created out of InDesign CS6?
Hello,
I created an Interactive PDF file out of InDesign and would like to make the large file a downloadable link and share it with the user in an email. I do not want to use DropBox or GoogleDrive.
The company I contract for has their own site - do I insert the file into the site or can I create a separate link for it?
I will be recreating these presentation PDF's constantly, so I would like to know if there is a simple way to create this link for files in the size of 7-12MB.
Any ideas on downloadable links? I do have flash - but rarely use, perhaps load the file out of flash?
Thank you so much for your help,
MeganHi Willie,
Thanks for your help. Most likely contact the company who maintains the
site then to share the file with them I'm assuming? -
How can I export a finished project from iMovie when the "share" function will not respond?
Hopefully someone might have an answer for me. I am trying to export a finished project to You Tube. However, when trying to choose the file, it does not show up in the finished project list. I have gone back to iMovie to see if I've made a mistake with finalizing it. It seems to be finalized, but I cannot share it to anything (You Tube, Facebook, iTunes). I click on share and it does not respond. I click on File, scroll down to share, it does nothing. Has anyone else had this problem? How did you reslove it?
I experienced the same problem as mreingrover. The Share features of iMovie appear to be completely unimplemented.
I had had MacKeeper installed for a short while on my previous Mac; never on my new MacBook Pro. I could not find any trace of it in Application Support, Launch Daemons, or LaunchAgents, in either my user Library or the root Library. But I figured maybe there was some trace somewhere that had been copied over from the old system, so I deleted iMovie and went to reinstall it from the App Store.
Now the App Store wants $14.95 for an app that has never worked right, and which is (I think) supposed to be free with my new MacBook Pro Retina. -
I cannot open any library from iPhoto 11 (the menu for open is grey).
Same for creating new library
In the root user everything works
Is there any startup application kwon to be not compatible with iPhone?
If I open cklicking a library everything works fineHave you made sure you're holding down the Option key before you launch iPhoto and keep it down until the selction window appears.
Log into another user account on your Mac that's the same as the problem account and check to see if iPhoto will work OK there. If it does go back to your account and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
Hello.
I need help deleting videos, tv shows, and movies downloaded from itunes. I have followed the instructions to delete from the macbook, I selected the videos I wanted to delete and right clicked to delete. Nothing happens. When I double click on the video it still starts playing. I also followed the instructions to delete the videos from the iphone by swiping from left to right with nothing happening. I opened the videos on the ipad and there is no edit selection like in the instructions on the support page. Can you please tell me how to permanently remove this content so it doesn't try to copy from each device when I want to back up the Iphone and Ipad to my macbook. Thank you.Hi Shawninglewood,
Welcome to the Support Communities!
The article below may be able to help you with this.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Cheers,
- Judy
Maybe you are looking for
-
Can I use an 85 watt charger for my 15" mac book pro
the 15" came with a 60 watt charger - it is okay to use the more powerful charger (that came with a 17" mac book pro) on the smaller laptop?
-
Of what use is SwingUtilities.invokeAndWait?
hi, i have a GUI that processes a huge amount of data on each click of the button. By huge, i mean it processes packs of about 1000 bytes each, but at any given time there could be 25,000,000 or more of them. Hence, my application is very sensitive t
-
Extend local OVS repository with NFS-based repository
Hi, I have a single server with Oracle VM 2.2 installed and i'm playing around with the OVS repositories. I currently have 3 OVS repositories on 3 local disk partitions. Disk /dev/sda: 731.2 GB, 731217920000 bytes 255 heads, 63 sectors/track, 88898 c
-
l have a backlight that went out the i touch is fine but no light. No water damage about two yrs old. Suggestions?
-
package nim; import java.util.Random; public class Row { private static final int MAX = 21; //max number of stars in row private int howmany; /** Creates a new instance of Row with 1 to MAX stars*/ public Row() { howmany = 1 +