How do I create a simple gallery in iweb? I don't know much coding though!

how do I create a simple gallery in iweb?
I don't know much coding though so I struggle
with some tips given on-line. I've spent many
hours on it with no success. Helpful advice will be greatly appreciated.

Instructions :
http://www.wyodor.net/blog/archives/2010/03/entry_308.html
Result :
http://www.wyodor.net/_Demo/Fancy/Fancy2.html
http://www.wyodor.net/mfi/Dide/Photos.html

Similar Messages

How can I create a photo gallery in flash cs3, Iam a beginner in flash

How can I create a photo gallery to put into my current flash site Iam creating? Using flash cs3, can anybody suggest any tutorials (noting complicated with me being new to flash cs3)
When going on line I saw that maybe you can use Dreamweaver, XML, or even Photoshop can anybody explain the difference between using one or the other?
THanks

Indeed, google ftw.
For example:
+as3 photo gallery flash tutorial
reveals many including this one:
http://www.flashmagazine.com/Tutorials/detail/as3_photo_gallery/

How do I create a simple message board (forum)

I am a BC new-bee. How do I create a simple message board (forum) in BC to use on a Muse site since no widget is available there.

No worries,
The simple way should be that:
open your forum page in Muse
under "object" > "insert HTML" > paste "{module_forum,a,}"
click ok
move the textbox to the right position
now publish this page to your bc site
if you have any forums set up in the admin of your site (http://yourdomain.com/admin) it should show you the title of the forum.
if there are no forums set up, you will need to create a forum in bc (Modules > Forums)
Try this and let me know how it turned out.
[ advertising removed by admin ]

How can I create an internal hyperlink in iWeb? Would like to put an interactive menu at the top of a page.

How can I create an internal hyperlink in iWeb? Would like to put an interactive menu at the top of a page.

Do you meant a link to one of your other pages or to a location on one of your pages? If it's the latter those are called anchors and iWeb does not support them. However, there are workarounds for that. See this blog: How to use anchors in iWeb. If you don't have a lot of widgets on the page it can work fairly well.
OT

How could i creat a feedback page in iweb?

how could i creat a feedback page in iweb?

You can set up a commenting section as mentioned here...
http://www.iwebformusicians.com/iWeb/Comments-Password-Protect.html
Example...
http://www.iwebformusicians.com/iWebMusicWebsite/Comment.html

I don't know how to download adobe acrobat reader. could some one please help. i don't know much comp terms

i don't know how to download adobe acrobat reader. could some one please help. i don't know much comp terms
Mark this discussion as a question-this encourages people to answer for points and helps you track answers.

iv'e been on that page a dozen times. it just gets me into an endless loop.
i need instructions i can understand and do what they tell me to do
In a message dated 2/18/2015 9:04:06 P.M. Central Standard Time,
[email protected] writes:
i don't know how to download adobe acrobat reader. could some one please
help. i don't know much comp terms
created by Jerry Klaimon (https://forums.adobe.com/people/Jerry+Klaimon)
in Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/7208793#7208793)

I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client ? what do I open and how do i put it in the right spot?

I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client ? what do I open and how do i put it in the right spot?

The simplest method is to run a defaults command on the client Macs (easily pushed via Apple Remote Desktop):
defaults write com.apple.SoftwareUpdate CatalogURL 'HTTP_URL_FOR_CATALOG'
for a user. If you run it via sudo it will set it for whenever you use softwareupdate as root.
The HTTP_URL_FOR_CATALOG has been changed with Mac OS X 10.6. If you use MCX it will automatically pick the new catalog – however if doing it manually the following URLs need to be used for whichever client version is in question:
Mac OS X 10.4: http://mysus.example.com:8088/index.sucatalog
Mac OS X 10.5: http://mysus.example.com:8088/index-leopard.merged-1.sucatalog.sucatalog
Mac OS X 10.6: http://mysus.example.com:8088/index-leopard-snowleopard.merged-1.sucatalog
Mac OS X 10.7: http://mysus.example.com:8088/index-lion-snowleopard-leopard.merged-1.sucatalog
Mac OS X 10.8: index-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog
To double check this applied you can run the following command:
/usr/libexec/PlistBuddy -c Print /Library/Preferences/com.apple.SoftwareUpdate.plist
and /usr/libexec/PlistBuddy -c Print ~/Library/Preferences/com.apple.SoftwareUpdate.plist
to see what settings are for the computer and user appropriately.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
MCX
Another alternative is to use Workgroup Manager to manage the preferences via MCX from your server. This can be done for users, or for computers if they are bound to your Open Directory.
If you are using 10.5 Server or newer: you can simply use the Software Update section under Preferences.
Manually:
Choose the accounts, computers, or groups to have the preference applied to.
Click on Preferences, and then the Details tab
Press the Add… button and navigate to /Library/Preferences/com.apple.SoftwareUpdate.plist
Press Edit…
Under Often, add a New Key and enter the name CatalogURL
Make sure the type is string and then enter your SUS URL (eg. http://mysus.example.com:8088/index.sucatalog or if using 10.6: http://mysus.examle.com:8088/ – see above from the defaults section)
Press Apply Now, then Done. Once users/computers have refreshed their MCX settings (usually the next login or restart) the new settings will take over.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
In order to have a system-wide configuration one has to run the following:
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index.sucatalog"
In order to correctly work both on Leopard and Snow Leopard the right command to issue is:
defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index-leopard-snowleopard.merged-1.sucatalog"
Happily used and tested on my network
The DNS trick that Chealion points out is fantastic. I use it at our office, and every computer on our LAN will automatically pull the updates from the local repository at high speed without any configuration.
Create the swscan.apple.com DNS zone on your internal DNS server, and have it resolve via an A record to your Mac
Tags: automaticupdates mac clients macosx setting as default software update
Category: Serverfault
Share
0
0
Google +
0
0
0
5
You might also like:
Can I Update My Jb 4s To 6.1.2 Without Restore? Tue. Jan 21st, 2014
Iphone 4 Not Charging After Update To IOS6
IPad 2 Not Updating To IOS 5.1
How To Resolve The â€âunable To Install Updateâ€ Error For OTA IOS Updates?
What Is â€âSoftware Updateâ€ Doing When It Says â€âChecking For New Softwareâ€?
Advertisement
Comment
- See more at: http://www.eonlinegratis.com/2013/how-do-i-change-the-software-update-server-add ress-on-a-client-mac-to-use-my-own-server/#sthash.YhHp5zWk.dpuf

My Firefox menu button has disappeared. Why? How can I get it back? Without it I don't know how to get to my FTP.

My Firefox menu button has disappeared. Why? How can I get it back? Without it I don't know how to get to my FTP. I never did anything to make this happen.

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.

My iSight get disconnected and create a distortion on the image. i don't know what could be!

my iSight get disconnected and create a distortion on the image. i don't know what could be!

Restart Mac and then test more than one iSight app in more than one user account. If the problem remains, try the suggestions from http://support.apple.com/kb/HT2090

How can I create an image gallery with "next" buttons?

So I am almost done with my portfolio site (YES!)..now I just need the actual content (the images). My site is written in AS3.
I've watched many tutorials on how to create an image gallery (auto scrolling ones, scrolling ones that require mouse hover, etc etc), but those aren't what I am looking for.
I want a gallery that looks exactly like this one here:
http://jalbum.net/res/help/integrating-tutorial.html
I have a lot of work to display in my porfolio so there must be arrows at the end of the thumbnails so I can add more stuff. So I am just stumped on how to make the image gallery work with the ability to scroll for more photos with the click of the arrows.
Any ideas? Thank you.

Watching tutorials and learning from them are two different things. If you have learned from them you should be able to use what you have learned to devise a gallery such as the one you link to. If you have learned from them and cannot use what you learned, then you probably need to find/learn more.
If you study the design you linked you should be able to reason out what elements you need to devise... it is not overly complicated.
For the large picture you could have a Loader into which you load whatever image is selected from the thumnails. To get a brief transition you could just set the alpha of the Loader to 0 when an image change is occuring and gradually fade it in after the image has loaded.
The greatest challenge you are likely to face is in getting the thumbnails to advance back and forth depending on which is selected. All of the thumbs would be placed in a container (movieclip or sprite) and that would be masked so that only a portion of them is visible.
All thumbs that are not selected have their alpha property set to some value less than 1. Selecting one calls for the file it associates with to be loaded into the Loader. If the choice happens to lie off screen, then you need to move the movieclip that contains all of the thumbs some set value in the right (+x) or left (-x) direction.
If you want the thumbnails to wrap infinitely then when one leave the thumbnails area for movement in a direction, you need to take that thumb and relocate it to the other end of the thumbs in the container.

How can i create a simple netweaver portal page that shows text and images?

Hi,
i have a simple question or maybe it's not so simple.
I am completly new to SAP Netweaver 2004s Portal. At the moment i'm trying to understand the struture of the whole thing. I already know how to create roles, worksets and pages and i know how to combine the different elements so a user can acces them.
And now i want to create a simple portal page that shows text and images. Is it possible to create such a simple page with the portal content studio? What iView do i have to use?
(I just want to create a start page with a welcome text on it.)

Marc
Considering that you would any ways go ahead with complex development from this simple start page I recommend create a Web dynpro Iview for your start page (include the Iview in your page).
For putting the contents use Netweaver Developer studio to build a simple start page application and put your static text on that Iview.
Please go through the following log after your NWDS development is over - This will make you comfortable for further challenging work.
http://help.sap.com/saphelp_erp2005/helpdata/en/b7/ca934257a5c96ae10000000a155106/frameset.htm
Do reward points if this helps and let me know of you want anything more.

How do I create a simple search program to search java console log

I wanted to know how can I write a simple program to return a particular value from the java console.
Let me give u a brief.
There is an application that I use, say "XYZ".Every time I perform an action on "XYZ" a log gets created in the java console. One such thing in the log I want to search is "ANI" and the program/script shud return the value adjacent to it.
Log Example:
NumCTIClients:0 CallType:CALLTYPE_PREROUTE_ACD_IN
ConnectionDeviceIDType:CONNECTION_ID_DYNAMIC
ConnectionCallID:4 ConnectionDeviceID:"0"
ANI:"9782755100" DNIS:"0006"
DialedNumber:"8002755010" CED:"1"
RouterCallKeyDay:145000 RouterCallKeyCallID:34320231
CallVariable1:"1234567" CallVariable2:"0"
CallVariable3:"0006" CallVariable5:"26000 123-45-6789
Not Valid " CallVariable6:"1001123-45-6789
26000000000038404LPCFAA" CallVariable7:"THIBAULT,
JOHN C. " CallVariable8:"CISCO
TESPHE " )
Now my understanding is that whenever java logs in the console it appends at the top, i.e, first record stays on top of the log sheet.
Now this script/program shud look up the top-most line which reads ANI and return the corresponding value which in the abv ex. was "9782755100"
I wud also want a small button when clicked wud copy the "9782755100" to the clip board
Edited by: SasK on Feb 9, 2008 6:09 PM

dillmann74 wrote:
Hello all,
I am looking for a way to terminate a program when the user enters stop. I am using textpad, and I am running windows xp home. Here is where I need it....
System.out.print( "Enter employee name:" );
String nameOfEmployee = input.next();
System.out.println();
I need to be able to enter stop in the enter employee name area to terminate the program.
Thank you all for your advice.Do you know about if statements?
If not check out the java tutorials here
if you do then I don't understand your question.

FAQ: How can I create a scrolling gallery of images?

You can use Flash Catalyst to create galleries, for example a scrolling list of thumbnails that display larger images when clicked. Here are some tutorials that explain how:
Create a photo gallery (using list interactions), on the FlashCats blog
Create a data list component -- Don't let the title scare you, a "data list" is a really powerful component to get to know better; it enables creation of very creative visual things like galleries. When you need repeating items, consider using a data list.

Hi there,
You can create a scroll motion where the image will fade out on scrolling, you need to use the Opacity tab under Scroll Effects Panel.
If you particularly need the image to be blur out, then you need to edit that image in any image editing program and make one copy of that image as blurred, then place both images (actual and blurred) on that page and use scroll motion or fade option to replace images.

How do I create a simple flare?

Hello,
I am a total newbie to AI, so any help/advice would be greatly appreciated.
I am trying to create a simple flare that will make my light bulb look like it is glowing really bright. I have been fooling around with the flare tool, but I can not figure out how to change the colors of the flare, etc.
I want the background of the flare to be transparent so that I can use it on any of my images and the image will show through. There are 5 different color flares that I need since I have 5 different bulb colors...1 yellow, 1 blue, 1 green, 1 amber, 1 red. I think that the scale should be about 25% height to 100% width...
Also, I want the same affect for a lighthouse image that I would like to put together...Like the light from the lighhouse is really bright and a focal
point.
Any help?
thx
Mike

There's a multitude of ways to draw flares. But let's explore the Flare Tool a bit more. After all, it's been sitting there occupying primary tool space in the Toolbox for years; might as well use it in the rare times you have occasion for it. To get a sense of the behavior, try the following exercise.
(The following assumes a CMYK document.):
Additional tips:
Like so many Illustrator features, tweaking the settings in the Flare Tool's stupid modal dialog is excruciatingly tedious. Before clicking to create the Flare you are going to adjust, go to the View menu and Hide Edges. Turn on the Preview checkbox in the dialog. Now you'll be able to tell what your adjustments are making are doing, without Illustrator's annoying highlighting of every path in a selected Group. (Absolutely hideous interface. I despise this program!)
Once you finallyget a Flare that you find useful, drag it and drop it into the Symbols Palette. Then save the Symbol Library somewhere for safe keeping, naming it UsefulFlares. Next time you work with Flares, load the library, even if you need a different Flare. When you manage to create another Flare you find useful, make it a Symbol, and export the Symbol Library again. (Do the same kind of thing with Brushes.)
Flares stored as Symbols, of course, can also be colorized somewhat by using the Symbol Stainer. That's a quick way to add a little color variance to tiny flares used as stars. But it's rather unpredictable due to the Screen Opacity Mode.
Don't be afraid to use two different Flares together. Store them together in the same Symbol.
The highlights of the screw threads on the bulbs are just an ArtBrush made from an expanded radial black-to-white grad, applied off-center to a circle. The ArtBrush is frequently useful for specular lights on cylindrical surfaces. The Brush's colorization mode is set to Hue Shift. (When expanding the grad, remember: There's no need to go nuts with the number of steps. 10 is usually a gracious plenty.) Each screw thread is just a single curved path with two Strokes: A thick black stroke with rounded end caps and an added stroke for the highlight brush.
JET

How can i create a simple workflow

hello every body,
i would like to add a workflow in my web portal maked with jdeveloper webcenter and i don't know how can i do it.
has jdeveloper a workflow application? i need a portlet? i have to create it? i must use oracle workflow builder?
Somebody knows some tutorial on the web to start step by step in this?
thankyou very much

Hi Kuya,
Why not using Alert management if you are in SRM 5.0 :
Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Event and Event Schema for Alert Management ->....
You should have a look here, you may be able to define event for document status.
For more information on Alert Management, see the SAP Library (SAP R/3 Enterprise, Release 4.70)
under:
SAP-NetWeaver Components ->SAP Web Application Server -> Basis Services / Communication
Interface -> Business Workplace and Services -> Alert Management
Hope this helps,
Kind regards,
Yann

How do I create a simple gallery in iweb? I don't know much coding though!

Similar Messages

Maybe you are looking for