How do I create a simple writeable template that will load to any PDF invoice

Hi there, I am wanting to use a word template (or writeable PDF template) to superimpose (cut and paste) onto a PDF invoice we receive by email. The goal is to allow us to code directly on to the PDF received. I have tried a few options but they all are time consuming.
Can you please recommend the simplest method to code direct on to the invoice copy (that a manager can then sign off when the email is forwarded to him/her) with the invoice and amendment attached.
Many thanks
Danny Kennedy

Try the attached example. Be careful though - if you make changes to this VI, make sure you save it before you run it, as it closes itself, and you will loose any unsaved changes...
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Attachments:
Splash_Screen_and_Launcher.vi ‏54 KB

Similar Messages

How do I create a simple launcher VI that will end when the new VI is started?

I've just recently upgraded to Labview 7 and I'm writing a complex set of programs that are related, but do not need to be running simultaneously. I would like to write a simple launcher program that will load the appropriate VI and close itself after doing so. I understand how to call a subVI and have its front panel open upon execution, but I'd rather keep the VI's seperate.
Thanks for any help in advance.
-Warren

Try the attached example. Be careful though - if you make changes to this VI, make sure you save it before you run it, as it closes itself, and you will loose any unsaved changes...
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Attachments:
Splash_Screen_and_Launcher.vi ‏54 KB

How do I create a filter in photoshop that will effect any photo you add it to?

I need to create a template that can be quickly and easily changed out week to week. So I need to adjust the colors of photos but add that to any photo I choose week after week. How do I do this??

Wrong tool. Use InDesign. That aside you may be looking for a solution that may not/ can not exist - how would you create a usable duotone of an image, without tweaking its contrast beforehand? It's simply gonna look different with every lighting situation and require manual intervention. and I don't know how "most designers" work, but for the aforementioned reasons I wouldn't work this way. Our clients 'marketing directors would ram me into the ground without even a second thought if they got such untweaked work.
Mylenium

How do I create a timesheet on numbers that will give me a weekly total as well as an hourly total?

I am currently enrolled in an internship, and I need to sumbit an timesheet every week, as well as one at the end of my internship showing the overall hours that I worked. How do I create a Time sheet that will show my start time, end time, total hours for the day, total hours for the week, and total overall hours. If possible can someone please show me step by step how to do this or give me a template I can go off of.

Hi j,
Take a look at the Employee Schedule template in the business section of the Template Chooser.
With a few modifications, it should do what you need.
Start by renaming the main table to reflect the new focus—you—then replace the names in row 1 with the Sunday dates of the weeks being recorded. Each column will then report your total house for one week (in row 25). You can use SUM() to total these in a separate cell or on a separate tabel.
One caution:
The values in the pop-up menus, like those in all cells showing either Date or Time values contain both a Date part and a Time part. Where only the Time part has been entered, the Date part is the Date on which the entry was created. For the pop-ups on this table, that was July 15, 2008, so the full value in cell C7 (John's first "In" time) is July 15, 2008 08:00:00. That full value is what's used in the calculation in C9.
If you edit the pop-up menu lists, there are two things to be aware of:
The "blank" item in the menus enters an empty string into its cell, not a true blank. You, as a user, cannot create an 'empty string' item in a popup menu. The closest you can come is an entry with a single space. If you edit the "blank" item, you will also need to edit the formulas in the hours rows to detect a space ( " " ) rather than an empty string ( "" ).
If you add or change any 'time' items in the pop-ups, the new (or changed) items will contain 'today's' date as part of the value. To avoid unexpected results from calculations, you'll need to edit ALL or the 'time' items if you choose to edit or add one.
Take a look at the template, then bring back any questions that arise.
Regards,
Barry

How do I create a formula in Numbers that will only sum a set number of entries?

I'm trying to create a spreadsheet that will keep track of my expenses. In Table 1, I have only the totals for each spending category. All the other tables represent each of the spending categories, which contain all the transaction entries. In Table 1, I created a drop down menu with the following five options:
Last 30 Days
Last 365 Days
This Month
Last Month
All Time
The numerical entries in Table 1 correspond exactly to the entries of the respective footer rows. At the moment, the sum in each of the footer rows adds up all the transaction entries, but I want to be able to add up only the entries that satisfy the selected drop-down menu option.
So how can I create a conditional formula in each of the footer rows that will allow me to do this?

Hi tsp,
compare each date entry with today's date
The TODAY function will automatically update as your time zone crosses midnight.
Here is a single-cell table to use as a reference (or you could place this somewhere in a larger table)
=TODAY()
Calculating days until a task must be done
C2 (and Fill Down)
=DATEDIF(Today::A$1,B2,"D")
But only if your dog can wait 3 days for a walk .
Regards,
Ian.

How do I create an Application with Automator that will open files in Photoshop Elements 11 and run an action?

Here's what I'd really like the Script to do when I select one main folder:
Look through all the subfolders, find all the PNG files and convert them to TIFFs, replacing the original PNG files.
Open the converted TIFF files in PSE 11.
Run an action on them in PSE 11 (which I already created that adds a white fill layer below the TIFF file.)
Save each file in their original location and Close each file.
Import them into LR.
Anybody? Bueller? Bueller?
If that's not possible, I'd love an Automator action that can convert the PNG files to TIFFs that can be viewed in LR 4.4. If I convert them in PSE 11, LR can view them, but if I convert them using Automator, LR cannot.
Thanks so much for any help you can provide.
-Jen

LabVIEW 7 added a property to get a command line argument. For older versions see http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DA5B56A4E034080020E74861.
I'm not sure I understand you problem with the Run button. If you set the execution mode to Run When Opened from VI Properties, it should execute once whenever it's called. I think that when building an executable, it changes the property to this if it's not already set. If the application does not have this set, it will not be running at all. I'm assuming that you are talking about the Run button on the toolbar and not a run Boolean that you've created on the front panel.
Since you have the app builder, your other option is to create a DLL. If you can call a DLL in Matlab, then that would probably be simpler.
Message Edited by Dennis Knutson on 11-28-2005 02:46 PM

How can i create a simple netweaver portal page that shows text and images?

Hi,
i have a simple question or maybe it's not so simple.
I am completly new to SAP Netweaver 2004s Portal. At the moment i'm trying to understand the struture of the whole thing. I already know how to create roles, worksets and pages and i know how to combine the different elements so a user can acces them.
And now i want to create a simple portal page that shows text and images. Is it possible to create such a simple page with the portal content studio? What iView do i have to use?
(I just want to create a start page with a welcome text on it.)

Marc
Considering that you would any ways go ahead with complex development from this simple start page I recommend create a Web dynpro Iview for your start page (include the Iview in your page).
For putting the contents use Netweaver Developer studio to build a simple start page application and put your static text on that Iview.
Please go through the following log after your NWDS development is over - This will make you comfortable for further challenging work.
http://help.sap.com/saphelp_erp2005/helpdata/en/b7/ca934257a5c96ae10000000a155106/frameset.htm
Do reward points if this helps and let me know of you want anything more.

How do I create a simple gallery in iweb? I don't know much coding though!

how do I create a simple gallery in iweb?
I don't know much coding though so I struggle
with some tips given on-line. I've spent many
hours on it with no success. Helpful advice will be greatly appreciated.

Instructions :
http://www.wyodor.net/blog/archives/2010/03/entry_308.html
Result :
http://www.wyodor.net/_Demo/Fancy/Fancy2.html
http://www.wyodor.net/mfi/Dide/Photos.html

Creating a simple HTML template

Hello All,
I have to create a simple HTML template for a screen in SRM for Mass change of a field on contracts. I have ITS service ready and I have created a HTML template with reference to the prorgam and screen. It generated following code. what change do I need to make to make the template displayed. When i run the template it gives me an error 'URL http://XXXXX/sap/bc/gui/sap/its/ysrm_ctr_mass/ call was terminated because the corresponding service is not available'.I have never worked on HTML templates before. Anybody wannna help me, pls?
Here's the generated code:
`include(~service="system", ~language="", ~theme="dm", ~name="TemplateLibraryDHTML.html")`
      `SAP_DynproLayerBegin(003,001,028,001)`
      `SAP_Label("%#AUTOTEXT001")`
      `SAP_DynproLayerEnd()`
      `SAP_DynproLayerBegin(003,003,020,001)`
      `SAP_Label("YSRMS_CTR_MASS_NEG_AMEND-YYNEG_AMEND_OLD")`
      `SAP_DynproLayerEnd()`
      `SAP_DynproLayerBegin(030,003,005,001)`
      `SAP_InputField("YSRMS_CTR_MASS_NEG_AMEND-YYNEG_AMEND_OLD")`
      `SAP_DynproLayerEnd()`
      `SAP_DynproLabelLine(003,003,030)`
      `SAP_DynproLayerBegin(003,004,020,001)`
      `SAP_Label("YSRMS_CTR_MASS_NEG_AMEND-YYNEG_AMEND_NEW")`
      `SAP_DynproLayerEnd()`
      `SAP_DynproLayerBegin(030,004,005,001)`
      `SAP_InputField("YSRMS_CTR_MASS_NEG_AMEND-YYNEG_AMEND_NEW")`
      `SAP_DynproLayerEnd()`
      `SAP_DynproLabelLine(003,004,030)`
      `SAP_DynproLayerBegin(004,006,014,001)`
      `SAP_Button("CTR_NEG_AMEND_REJ")`
      `SAP_DynproLayerEnd()`
Thanks,
Chandra

Hi
Which SRM version are you using ?
Please do the following steps ->
-->Activate the services through SICF - SRM transaction code.
> Go to SICF transaction and activate the whole tree under the node Default host>sap>bc>gui>sap>its.
Right click on any of the services (there you will find option to De-actiave / activate the service)
Related links ->
Note 851940 - Launchpad in BBPSTART has wrong URL for services
Re: Service Cannot be Reached
Please ensure IACOR service must be running correctly before publishing the HTML Templates using the report - W3_PUBLISH_SERVICES
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
Re: Activating a Service in SICF
Regards
- Atul

I'm trying to type wedding invitation envelopes which are 5x7 and I don't know how to create the format. In the pages area, the available templates are all standard envelope sizes. How do I create the 5x7 format template

I'm trying to print 5X& envelopes. In pages, the templates are all standard sized. How do I create a 5x7 envelope template so I can merge my addresses?

I presume you are using the Pages application, is that correct?
So start off by launching Pages and choose one of the regular envelope styles. Traditional works well for me.
Next go to the File menu and select Page setup. From the menu that says Paper Size select Manage Custom Sizes. In the resulting dialog, there should be a button on the left labeled "+". Click it. In the Paper Size area, select Width 5 in and Height 7 in. Name the size (where it says "untitled" something descriptive like "5 x 7 envelope". Click the OK button. The Paper Size menu here should now say the description you gave it. Click OK again. Your work area should now be a 5 x 7 envelope.
Best of luck.
PS If you are using Word or some other program, the process is probably the same or very similar.

How do I create a simple message board (forum)

I am a BC new-bee. How do I create a simple message board (forum) in BC to use on a Muse site since no widget is available there.

No worries,
The simple way should be that:
open your forum page in Muse
under "object" > "insert HTML" > paste "{module_forum,a,}"
click ok
move the textbox to the right position
now publish this page to your bc site
if you have any forums set up in the admin of your site (http://yourdomain.com/admin) it should show you the title of the forum.
if there are no forums set up, you will need to create a forum in bc (Modules > Forums)
Try this and let me know how it turned out.
[ advertising removed by admin ]

How do I create a Bing Maps route that stays on a U.S. Route number for tourism/scenic purposes?

How do I create a Bing Maps route that stays on a U.S. Route number for tourism/scenic purposes? I want to go from point a to point b while staying as much as possible on a US route number, such as US 6 or US 20 or US 101 or US 40, (and the defunct
US 66).
Instead of dragging points back to the road every time it pulls you onto a faster route, can I just say "use RT20 as much as possible?"
Or as simple as choosing a point on a US Route and selecting the entire length as a trip. The idea is to plan trips throughout the USA avoiding interstates, and staying on the actual original routes.
I am posting this here at request from Microsoft Support Engineer as a more complex request.

This is already on the feature request list from one other person. This would take a lot of work to implement from a technical side of things. given that only one other person has requested this, there isn't much of a business case for this yet.
http://rbrundritt.wordpress.com

FM 12: How do I create a .ps file of a book? (errors prevent PDF generation)

FM 12: How do I create a .ps file of a book? (errors prevent PDF generation)

There's probably a graphic on one of your pages that is causing a postscript division error (i.e. divide by zero?) See also: PostScript error offending command div
As Jeff suggests, track down the errant graphic to see what's wrong. If you print to file, you should get an idea of roughly where in the docs the error occurs by watching the print thermometer display.

I would like to create a simple vote form that members can hit the reply button and record their preference in a check box. Is this possible on iPad?

I would like to create a simple vote form that members can hit the reply button and record their preference in a check box. Is this possible on iPad?

Go to the App Store and search on "Forms Management".
There are a lot of candidates.

Can I create a presentation in iPhoto that will combine still slides and video?

I have just returned from a safari and have a lot of pictures and videos from the trip. I would like to create a presentation/slide show that will show the slides and also videos in the same slide show and allow me to manually pace the show. I know how to do this in PowerPoint but would rather use a more natice mac ap and thought it might be possible in iMovie or iPhoto but am not sure exactly what the best way to do this would be.

and allow me to manually pace the show. I know how to do this in PowerPoint but would rather use a more natice mac ap and thought it might be possible in iMovie or iPhoto but am not sure exactly what the best way to do this would be.
If you want a native Mac application for your slideshow you could also try Keynote, the Apple alternative to Powerpoint. It will give you similar presentation options.
Aperture - if you have it - would allow to trim the videos, allow more fine control over how the audio of the clips will be mixed, and still allow to manually pace the slideshow, but it is expensive and will no longer be developed. But if you have compatible versions of Aperture and iPhoto, simple open your iPhoto Library in Aperture: Aperture 3.3: Using a unified photo library with iPhoto and Aperture

How do I create a simple writeable template that will load to any PDF invoice

Similar Messages

Maybe you are looking for