How do i create a slideshow with arrows in iweb

i want to create a "slideshow" that allows the user to move forward and backward using arrows at their own pace rather than a looping slideshow they cannot control.

if you have iwe2 or iwe3 then you can use iweb photos page pop up slideshow.
when your users pop up the slideshow, they can mouse-over the slideshow image and a slideshow will show up to allow them to pause/play, next and prev image.
it also has thumbnails row on top, your users can selectively display and image.

Similar Messages

How do I create a slideshow with music and voiceover?

I am trying to create a slideshow with photos, music (iTunes playlist), and voiceover created in Garageband. I cannot figure out how to have both the voiceover and the music play during the slideshow. I also tried iDVD but ran into the same problem.
I also wanted certain songs to play during certain sets of pictures and I can't figure out how, other than to create separate slideshows for each song, how to set it up to show the photos for the duration of certain songs... if that is possible. However, my main issue is the first one - how or which program to use to combine photos (iPhoto), music (iTunes), and voiceover (GarageBand).

However, my main issue is the first one - how or which program to use to combine photos (iPhoto), music (iTunes), and voiceover (GarageBand).
Use whichever you want.
I am trying to create a slideshow with photos, music (iTunes playlist), and voiceover created in Garageband. I cannot figure out how to have both the voiceover and the music play during the slideshow. I also tried iDVD but ran into the same problem.
Use separate tracks for music and voiceover/narration so you can adjust volumes independently.
I also wanted certain songs to play during certain sets of pictures and I can't figure out how, other than to create separate slideshows for each song,
Use separate tracks for each song or use two tracks and alternate songs on these tracks so as to allow maximum alignment/overlap possibilities.
how to set it up to show the photos for the duration of certain songs... if that is possible.
Slide photo and/or song to align beginnings and then drag the end photo "handle" left or right to change its duration to match the duration of your song.

How can i create a slideshow with the newest version of dreamweaver?

I am trying to figure out how to create a slideshow but i cannot find any explanations for the new version of Dreamweaver. Can anyone help?

DW doesn't make slideshows. You'll need to use a jQuery plugin or a 3rd party commercial Extension.
Do a web search for:
jQuery Cycle2
jQuery WOW Slider
jQuery Fancybox2
Primer for using jQuery Plugins
Alt-Web Design & Publishing: Primer for Using jQuery Plug-Ins
Nancy O.

How do I create a slideshow with selected photos on my iPad2

I want to create a slideslow using selected photos (not all photos) from the photos that I've imported to my iPad. Can you tell me how to do this?

You will need to use the computer that you sync with, running the most recent version of iTunes. Connect the iPad to the computer, click on the iPad name on the left, click on the Summary Pane of the iTunes window on the right, and then click on the Check for Update button.
This explains it as well.
http://support.apple.com/kb/HT4972
You can use any computer to update, but you will lose everything that you have on your iPad, so that's why you really should use your own syncing computer.
I recommend this as well ....
What you should do anytime that you update the device is to transfer purchases from the iPad into iTunes - File>Transfer Purchases - and you should backup the iPad as well. When you update the update the device, if something goes wrong, you can restore from the backup.
However, iTunes should ask if you want to backup before you update, but just in case create the backup yourself before you update. The backup contains your app data and settings - along with other items - so make sure you backup first.
If you have any other important files, you may want to transfer them to your computer as well, prior to the update.
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup
http://support.apple.com/kb/HT1766

How Do I Create A Slideshow in Iweb?

How do I Create a slideshow in Iweb with arrows to right and left, just like this link:
http://www.thinkfa.com/
Thanks in advance!

It's done with java script. Here is one example on this demo page: AutoViewer which is created in iPhoto with the Flash Album Exporter plugin.
Another source is Jalbum. It have over 100 skins/themes, one of which should match what you want.
OT

How do i make a slideshow with iphoto for my mother and view on apple TV?

How do i make a slideshow with iPhoto fo rmy mother and view on my appleTV. I guess i need to know the best/easiest way. Do i create a slideshow in iPhoto and then it will automatically pop up on my apple TV Photos? or is it really not that easy? i don't want to do airplay......i would like to sit and enjoy it with her.
m

icloud sync would only be an option if you login with your appleID
so think flickr is the easy way

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

How do you run a slideshow with no music in new Photos app

In the new Photos app I can find no way of running a slideshow without music - either the standard themes or selecting my own music. How can I run a slideshow with no music at all? No setting, tab or option seems to be available to achieve this.

Hit top right arrow for slide show; click on Music, click button next to search; choose Theme songs, click on blue check mark to remove it, then hit PLAY SLIDESHOW.

Creating a slideshow with Keynote

Is there a simple tutorial somewhere showing how to create a slideshow with music in Keynote?
I tried the Help menu and the PDF instructions that come with Keynote, but could find no simple instructions for a newbie to follow.

If you have individual music tracks you want associated with specific photographs, you can Build each track into a slide and then Build the photographs into the same slide. Then, you can set the photo Builds to be "automatic" so that they will be loosely synchronized with the music. (I emphasize "loosely" because the speed of Builds is not absolute, and varies with the processor speed from computer to computer, so it is not possible to have absolute synchronization with this procedure.)
If you simply want to have a slideshow, with music running in the background, you can do as Tulse has described: create the music playlist in iTunes and Record it as a Soundtrack in the Inspector/Documents/Audio menu. This also will allow you to "Record" the Builds and Transitions in sync with the music. CAVEAT: this will playback properly ONLY as a stand-alone Keynote presentation. This does not seem to retain sync when exported to another format, or even when played as a Keynote presentation via a Hyperlink.
Another possibility is to create the slideshow and establish a timeline for the Builds and Transitions. Then in Garage Band (or any other music editing software) you can create a music track timed to the slideshow and then import it (via iTunes) into Keynote as a Soundtrack.
It all depends on what you are trying to accomplish as to which is the most appropriate method (or series of procedures) that will work best for you. However, as Tulse has said, there is no tutorial on this subject. Trial-and-error and a little hands-on experience will be your tutors.
Message was edited by: Ron Streicher

How can I make a slideshow with pictures and burn it to a dvd? what program to use?

how can i make a slideshow with my pictures and then burn it to a dvd?

Apple's builtin "iPhoto" application can do that easily. Open iPhoto and click on "Help" at the top of the screen for assistance in creating it.
Hope this helps

I bought Elements for a specific purpose...to create a slideshow with music.

DOES the new REVEL include CREATING A SLIDESHOW WITH MUSIC? This is the reason I bought ELEMENTS to begin with.
I am not interested in I PADS, CELL PHONES or any other internet media. I need the SLIDESHOW/MUSIC feature of my original ELEMENTS. CAN YOU HELP? Thank you, Kathy

kitt6549 wrote:
DOES the new REVEL include CREATING A SLIDESHOW WITH MUSIC? This is the reason I bought ELEMENTS to begin with.
Hi,
I'm not sure about how you came to the idea that PSE would help you create slideshows with music. To do that seriously, you need a more specialized software like PicturesToExe for example : http://www.wnsoft.com/picturestoexe/ (I have no relationship with this company but I have seen what my fellow photographers are doing with this software).

What Apple software do I use to create a slideshow with voiceover?

What Apple Software do I use to create a slideshow with voice over?

There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

How do I create a track with just controller MIDI data in it?

How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it.
Ideas?
Thanks
-Mike

Soniq2 wrote:
How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
Let me qualify, I'm using Logic 9, not upgrading for various reasons.
Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school) Here's an example of an external instrument setup in the Environment.
A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names). This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan.

How can I create a solution with Livecycle

I work for a high school and we have about 12 pdfs that we need parents to read/scroll through, then 10 (different) pages that we want them to print, complete and return to the school. Finally, we want them to see a "Thank you, you have done all you have to do" type screen. We want to make it as user friendly as possible so I was thinking...
Reading pages, 1 at a time with next at bottom.
Click next and it takes them on. When they get to printing pages 1 print button prints all pages we need them to print. Click next, and it takes them to optional print pages.
Click next and it says, thank you.
How can I make this happen if I already have all the pdfs?
Help please.
John Dent
[email protected]

Thank you soo much. A few questions?
They weren't created in designer but could I just import all of them?
How do "build the structure" for the naviagtion?
Where/how do you add the script.
Thanks again,
John Dent
Date: Fri, 30 Jul 2010 07:01:08 -0600
From: [email protected]
To: [email protected]
Subject: How can I create a solution with Livecycle
I assume that all of these PDFs were created in Designer. If so you can add any buttons that you want to appear on every page (Next, Previous) onto the Master page then there is script you can add to the buttons to actual move the pages (xfa.host.pageDown() and xfa.host.pageUp()). The Prin button can be added to the specific page and you can pass the page numbers that you want to print as a parameter to the print command. Lastly when you get to the last page and the click Complete you can display a messageBox with your Thank you message.
Hope that helps
Paul
>

How do i create a slideshow with arrows in iweb

Similar Messages

Maybe you are looking for