How do I create a Vertical Line?

Hello Forum,
I created a vertical line between the navigation and main content. I made the right side of the “side panel” visible to create the line.
It works in IE, but if viewed in Firefox, there is a gap at the end of some of the pages. Is there a better way to place a vertical line there or is there a fix for Firefox?
Here is a link to the site: http://siennastaffing.com/coastpi/services.html
Thanks,
Andrea

Divs don't behave the same as table columns. If you want to create the illusion of equal height columns with CSS, you will need to use a background image equal in width to your #container division and repeat-y.
EXAMPLE faux column page:
http://alt-web.com/TEMPLATES/2-column-fixed-width-template.shtml
Background Image used:
http://alt-web.com/Images/grn-bg.jpg
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Similar Messages

How can I insert a vertical line between two underlined unfilled with text lines. I am trying to construct an invoice and I need a break. If I try any of the shapes or inset functions it eliminates my underlined lines and shifts the whole document.

I am trying to construct an invoice. How can I install a vertical line between two or more underlined lines to create a break. I have tried the insert, shapes and nothing works. If I try any of the functions the whole document shifts to the right and I loose some of the lines. Is there a work around, or is I work not able to do what I want?
Thanks
Armand

It sounds as though you may have "Object Causes Wrap" activated for the Line Shape. This will push other content away.
See the Wrap Inspector.
Jerry

How do I create a vertical gradient in a table, not with an object?

How do I create a vertical gradient effect for alternating rows in a table?
I'm trying to get my table cells to alternate and look like this:
Thanks,
freecondomap

Hi, BTJT:
We are starting work on a large catalog project where we will need to change the gradient fill to -90 on every other row in the table - excluding the header, footer and first row of each table.
How would you adjust the script you mentioned above to do this? and would the script work in Indesign CS5.5 versus Indesign CS6
It does get a bit more complicated. Not super-complicated, but not as simple.
The above idiom only works for all the rows in a table. If you want to do any specific subset, then you need to use a loop.
But is it necessary that you change the gradient angle on every other row? Isn't it sufficient to set the gradient angle on all rows, and then apply the alternating gradient on alternate rows using the the alternating fills feature, as suggested by Jeffrey?
I guess you also want to apply to...all the tables in your document? That would then be:
app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().gradientFillAngle=-90;
Unless you need to be more selective? But I don't think you do?

URGENT! How do I create a vertical scroll button in Flash CS6 for online banners?

Hi, I am creating Flash online banners and the disclaimer needs to open as a vertical scroll banner once the mouse touches the 'x close' button where the words 'Disclaimer' is stated.
How do I create a vertical scroll button including text?
I am using Flash CS6.

Hi Babaa,
sry for the lateness of my reply.
I would simply make a button that when clicked, displays a layer containing your disclaimer text. The discliamer text would be inside a Movie Clip (MC) for ease of controlling.
the MC then contains a text field which has a scrollable field. as the user scrolls through you can then display a "close" button to close out the disclaimer MC.
If you still need the work done feel free to email or PM me here and we can discuss the job further.
Regards
Russ

HELP! How do I create a vertical scroll button for online banners?

Hi, I am creating Flash online banners and the disclaimer needs to open as a vertical scroll banner once the mouse touches the 'x close' button where the words 'Disclaimer' is stated.
How do I create a vertical scroll button including text?
I am using Flash CS6.

Hi Babaa,
sry for the lateness of my reply.
I would simply make a button that when clicked, displays a layer containing your disclaimer text. The discliamer text would be inside a Movie Clip (MC) for ease of controlling.
the MC then contains a text field which has a scrollable field. as the user scrolls through you can then display a "close" button to close out the disclaimer MC.
If you still need the work done feel free to email or PM me here and we can discuss the job further.
Regards
Russ

How can i make a vertical line in Application Toolbar when creat GUI STATUS

I see some standard UI have a separator vertical line in the GUI STATUS--Application Toolbar?
Could you tell me how can i creat it in my customer GUI STATUS?
TKS a million~~

Hi.
Please try.
1)Change mode your GUI-STATUS.
2)menu -> Edit -> Insert -> Separator line.

How I fixed the colored vertical lines on my Mac Powerbook G4 17"

Hello all,
I know that many people with a Powerbook G4 17" are suffering from the colored vertical line problem on their displays. This is were a pixel wide vertical line of color (yellow, green, purple, red, and/or blue) randomly appears on the laptop's display, usually between 24-36 months after purchase. This is also known on various internet forums as the "bridget riley effect" -- named after a painter whose art looks very similar to this effect. Many, if not all, of the laptops that suffer from this defect are 17" displays and have a serial number that starts with W8. Mine starts with W85; you can check yours by looking underneath the battery. It usually starts off as just one line, then two, then a few months pass and before you know it your screen looks like this:
This is my screen two years after the first line showed up, which was two and half years after getting it in December of 2005. Not so pretty. And completely useless without an external display, kind of killing the purpose of a Laptop. As a film editor I needed my screen to see the images and more importantly I needed it to be mobile. There's not always a screen to plug into.
I tried getting Apple to fix the problem, but apparently they're just ignoring the fact that almost all the laptops that came from this certain factory in Thailand (indicated by the serial number starting with W8) have failing displays. They delete threads and forums on their website, and try to censor and ignore the problem as much as they can. Unless some huge media blitz happens, or there is some kind of legitimate lawsuit, I highly doubt they ever will do anything about it, and you can't really blame them. They are a big business and addressing this problem with cost them potentially millions in repairs and tarnish their reputation as a quality manufacturer, and Apple's biggest commodity is its reputation. It ***** that Apple allowed this kind of thing to happen, but as things stand right now, it would be a poor business decision to fix it.
So, fellow vertical line sufferers, AKA the W8 club, my advice to you is stop holding out hope that they will pay for your screen to be fixed and get it done yourself! If you do it right you can get it done for between $60-$99. Here's how I did it.
First off, know that this is a hardware problem. There is no setting in system preferences you can change that will make the lines go away. There are failing physical parts in your computer to blame and they need to be replaced.
Second, in order to keep things as cheap as possible, you are going to replace the parts. It's actually pretty easy.
Thirdly, you are going to need a whole new display. I thought maybe if I replaced the display data cable (the cable that runs from the computer under the key board to the back of the screen) it might solve the problem very cheaply, since a brand new one only costs about $9 online. I took the computer apart, replaced the cable, but the display did not change at all. So the problem is the screen, not the cable. I needed a whole new screen, however, a brand spanking new one can cost between $350-$600. So I went on eBay, typed in my computer, and looked for computers that were being sold for "parts" or "repair." These are usually much cheaper because they are not working computers, but you don't need the computer to work, you just need the display to work. If you do this, make sure you read the descriptions. If there's any mention of display problems, move on and keep looking. You don't want to replace the display only to have the lines show up all over again a few months down the line. They wont always give you the serial number, but obviously try to stay away from serial numbers that start with W8. I found a used Powerbook being sold for parts for $63. It didn't have RAM, or a Hard-drive, or screws to keep the keyboard on, but the display apparently had no issues. With shipping and handling it cost me $94 total and three days to get it. The serial number started with V7. I'm sure with a little patience and vigilance, you can find something just as cheap or even cheaper.
NOTE: Some powerbooks have High-Res display screens, so make sure you know which screen yours has so you know which to look for.
Now, how to actually replace the display. I used an awesome website called ifixit.com. They give you detailed easy-to-follow instructions with photographs. I'll let them give you the nitty gritty of how to replace the display. Here is the actual How-to guide I used:
http://www.ifixit.com/Guide/Installing-PowerBook-G4-Aluminum-17-Inch-1-1-67-GHz- Display/258/1
The only tools you really need are a small phillips head screwdriver and a T6 and T8 Torx screwdriver (they are starred on the end, as oppose to crossed like the end of a phillips head). They say you need a "spudger" but I didn't. You can get these at any hardware or auto-parts store. Return them when your done if you are really on a budget, but you might want to take more part from this new computer in the future, so your call. You'll need to print out the instructions first, or use another computer to follow them since you obviously can't use your Powerbook. Find a flat, well-lit work space, preferably near a TV so you don't get bored while working, and use the how-to guide to switch the old display with the new one. It only took me a couple of hours to finish the whole thing, and I didn't have to pay a repair man hundreds. My display works perfectly now! It's so nice to be have the mobility of a laptop again (especially since the computer i got off of eBay came with a battery that can actually hold a charge).
NOTE: There are a bunch of screws and a few small parts that will need to be taken out while replacing the display, and its important they all go back in their proper spots. So I highly recommend you take a long piece of tape, loop it, and stick it flat onto the side of your work space. As you take out each screw or small part, stick them in order to the tape. This way nothing gets lost and when you work backwards to put your computer back together you'll always know which screw or small part is next in line and which one the how-to guide is referring to.
I really hope this helps people with this problem. This seems to be the only solution. And for less than $100 bucks, I think its worth it, especially since you now have back up parts for any other part of your computer that might fail in the future. My disc drive stopped working recently so I'm replacing it with the one that came with the computer I got off eBay; a $90 part. I tried to make this as easy-to-follow, practical, and comprehensive as I could -- for as cheap as I could. GOOD LUCK!!!
-R

I suspect not. There are long threads with hundreds of reports, most with PowerBooks whose serial numbers began with W8 (or W85). Still there is no Repair Extension Program for this issue.
At this point, your only recourse is to discuss the issue with Apple Consumer Relations at 1-800-767-2775, if you are in North America.

How do i create a new line item (say 20) in reference to line item 10

Hi all,
I am trying to map a scenario where i want to create a new line item with reference to an existing line item. Where do i get this option in SD, and how could i go about it?
Thanks & Regards
Ravi

> In ECC6 if u go to VA01 and enter the SP and SH,
> Press Propose Item Icon, then one window will pop-up
> asking for Sale Document Number, enter the Number and
> select- selection list, there u will get all the
> line item of the Sale Doc. Select and copy Material
Hi i am on SAP 4.7. How could be the same handled here?

How do I create a similar line effect to this:

I'm trying to figure out the best way to create a similar line effect to this in illustrator, any ideas?
Thank you!

Draw a black spikes (vertically), option drag a copy, make a blend specified steps.
Copy paste in front, rotate 180 degrees, adjust position
Draw a circle on top, use as a mask.
Rotate all about 30 degrees.

How can I create a vector line

A vector image editor needs edit a vector line.
How can I create it ? thanks

a biot more information would'n hurt anyone ;-)
What do you want to know:
How to calculate the new line-position / attributes after a mouse-drag?
How to use mathematical 'vectors'?
How to paint it?
Eth

How can I create a horizontal line under a line of text?

Hi,
I have FM 12.0.3.424.
Does anyone know how to create a horizontal line under heading text that is the width of the page? Similar to creating a border but without the top and sides.
Is it even possible?
thank you in advance!

Use the "Frame Below" attribute in the Advanced tab of the Paragraph Designer for your heading tag to use a named Reference Frame from your Reference page. If you're using the default templates for your documents, you could try the Single Line selection (or make your own).

How can I create a multi-line combo box?

I am using Adobe Acrobat Pro 9 and I am trying to create a multi-line combo box on my fillable form. At the bottom of this form/letter I would like to have a several paragraps that the user can choose from, but it's only allowing me to enter one line at a time. Any help??

Hi, Did you find the answer to this? I'm looking to create a combo box with multi-lines

How do I create a dashed line growing longer?

Hi all,
I want to create a dashed line that grows longer. I made two keyframes (at frame 1 and frame 15) with dashed lines of different lengths. Motion or Classic Tween just makes the small line move to the right and then turn into the long line immediately at frame 15.
Shape Tween gets me the closest (actually shows a line growing), however, it turns into a solid line in the intermediate steps.
My next idea is to create a mask that slowly reveals more of the line. Is that the best solution?
Thanks!

yes, use a tweened mask. that's the easiest solution.

How do I create a new line in a pdf document?

Hello,
What I am doing is taking a compilation of information from multiple tables, displaying it in a textarea, allowing a user to change the information that is present in the text area if they wish, and then allowing them to create a pdf file. I am able to do everything except that when the pdf file is created, there is no new like created when the pdf doc is created. I can display multiple lines by using:
<textarea name="all_content" cols="100" rows="30"><?php
        echo $row_getAllCont['first_name'].' '.$row_getAllCont['last_name']."\n";
        echo $row_getAllCont['email'];
        ?></textarea>
<?php $_POST['all_content'] = nl2br($_POST['all_content']); ?>
Then create the pdf doc by using:
$newpdf = pdf_new();
pdf_open_file($newpdf, "");
pdf_set_info($newpdf, "Creator", "Me");
pdf_set_info($newpdf, "Author", "Me");
pdf_set_info($newpdf, "Title", "Tryal");
pdf_set_info($newpdf, "Subject", "tryal");
pdf_begin_page($newpdf, 595, 842);
$newfont = pdf_findfont($newpdf, "Times-Roman", "host", 0);
pdf_setfont($newpdf, $newfont, 10);
pdf_show_xy($newpdf, $_POST['all_content'], 50, 750);
pdf_end_page($newpdf);
pdf_close($newpdf);
$newbuf = pdf_get_buffer($newpdf);
$newlen = strlen($newbuf);
header("Content-type: application/pdf");
header("Content-Length: $newlen");
header("Content-Disposition: inline; filename=gen06.pdf");
print $newbuf;
pdf_delete($newpdf);
?>
The problem is, when I want to display the first name and last name, and then email in the pdf, I want the email to display on another line only if email isn't set to NULL. I can get it to display in a webpage using the nl2br function but that doesn't work in pdf. Any ideas how to make this work?
Thanks,
Kelsey

Hi Robert,
Welcome!
I see you are subscribed to our PDF Pack service.
Check out this FAQ to help get you started!
Let me know if this helps.
Looking forward to hearing back from you!
Kind regards, Stacy

How do I create a white line border for my video

So I've got standard HD source video with 16:9 aspect ratio (1920 x 1080 pixels) and I've made it "wide screen" by putting black slugs as bands at the top and bottom of the screen. I would now like to place a white line border at the top and bottom of the visible video. How do I do this in FCP? Is there a "draw" like function within FCP similar to those in Microsoft Word or Powerpoint, so that I can draw a line and then define it's colour and width?
Thanks very much.

Hi Michael,
if you need to do this often a plugin may also help you to quickly and easily create, reposition and change the width and color of one or more lines. One of these plugins is a free one of mine (actually I have two line genertors available for you).
You can find them using the link below, they are "line generators" indeed:
http://www.lucavisualfx.com/freebies.htm
Hope you find them useful, if you need me to increase/decrease certain control values (in the actual script/code) let me know and I'll make necessary adjustments for you.
Luca
Disclaimer: The plugins downloadable from the link above are totally free, however, the web site includes commercial plugins/visual fx web pages. As per TOU I am required to state that I may receive compensation of some sort from my link reccomendation.

How do I create a Vertical Line?

Similar Messages

Maybe you are looking for