How do i create a wave effect on the dock when the cursor passes over it?

how do i create a wave effect on the dock when the cursor passes over it?

In System Preferences > Dock > check "magnification"  and move the slider towards the max side.

Similar Messages

  • How do I create a URL to filter a view when the value I have from list one is the ID that was used by list 2 to pull in the list 1 title?

    My list "Tasks" has an record with Title = "Build SSIS for Duke Energy" and its ID is 1. Then I have a list "Journal" where I have tracked entries related to the progress of the task. When I create the Journal entries I passed
    in the ID of the task 1 which then pulled the title into the Journal's Associated task lookup column. Now I'd like to have a column in the Tasks list that would have a URL to take me to all journal entries related to the Task. But passing in the ID 1 of the
    task does not work. 
    If the lookup column has the actual Title from the task in all the time and it is not dynamically pulled every time the list is queried shouldn't I be able to filter on the Title e.g. "Build
    SSIS for Duke Energy"  

    I ended up going with a workflow to build the URL and sending the title to the look-up column. 
    I tried the script at that site and ran into several problems. It didn't work with views that were grouped, the calculated links did not show on the edit and view forms. I assume those forms would have to be changed to run the script also.
    In addition to, I have to add a CEWP to each view and I was also losing the "Items" and "List" options (next to "Browse") from the ribbon until I clicked around in the list. 
    What are the downfalls of a workflow? I ask because many people default to using a similar TextToHTML script like you mentioned.

  • How do I create a PDF from ID, so that when the PDF is opened in Reader, the text is editable?

    Three different members of Adobe Support have unfortunately been unable to resolve this problem so I am pinning all of my hopes on my fellow users! Please Help!
    I have been sent a PDF by my client (created via their previous agency) which when opened in Reader (not Acrobat) enables me to edit the existing text (in the existing fonts, granted only Helvetica) and re-save it as a hi-res PDF.
    I have tried virtually everything to get this to work without success, I can create 'editable fields' but this deletes the existing text and inserts a blank box over the top which I can type into with the default 'Times'.
    What will ultimately happen is that I will design the documents in English and then they will be uploaded to an ftp for download at various offices around the world. Therefore they need to translate what we have written but retain the same document design.
    I know this is possible because I have the PDF in front of me, I also know that PDFs in essence weren't designed to be editable but apparently it is now achievable and very useful if I can get the blasted thing to work
    Very many thanks, your opinions will be most appreciated!
    Regards
    Adamskidog

    Well, everything in those PDFs were form fields. You can make form fields in Acrobat - and then you can right-click on 'em and change their appearance, whether or not they'll accept rich text input, whether or not they'll scroll, and so on. It could also be done in LiveCycle Designer, for what it's worth. I wrote a now-obsolete post about this in response to yours before Mike showed up with this video.
    Probably most of your work on your designs in InDesign would need to be trashed; you'd need to rebuild the whole thing in Acrobat or LiveCycle. I have to say that, unless your targeted documents are extremely simple, that this is one of the worst document translation workflows I've ever seen in the last fifteen years. It might work - I'm trying to keep an open mind, here - but if you have any non-Latin-script languages in your target list, or if print reproduction is what you're after, or if you're expecting tracking revisions to the translations to be anything but a nightmare, I would suggest that you test this method inside and out before progressing any further.

  • How can I create an iridescent effect in a Photoshop 3D object?

    How can I create an iridescent effect in a Photoshop 3D object? I have searched everywhere for downloadable option for a mac with no luck. I'm working with CS6.

    NO way. Such stuff isn't even commonly available in many 3D programs becaus it's actually pretty advanced shader stuff...
    Mylenium

  • How do i create a spotlight effect in final cut pro x

    How do i create a spolight effect in final cut pro x any help would be greatly recieved!!
    all i can find is tutorials for how to do the effect in the older version of final cut
    Many thanks!

    In the Timeline position your Playhead at the starting position.
    In the Viewport position the Shape Mask at the starting position.
    In the Inspector click the Add Keyframe button.
    Press Control-V to open the Animation Editor to see your keyframes.
    Move the Playhead and the Shape Mask to a new position.
    In the Inspector click the Add Keyframe button.
    Continue adding keyframes until you have defined the Shape Mask’s movement.
    Regards
    Nolan

  • How do I create a cameo effect on certain photos in either iPhoto or aperture?

    How do I create a cameo effect on selected photos in aperture?

    how do I check to see if I have  lay=test version?
    When you select Aperture in the Applications folder in the Finder, the version should show below the Aperture icon:
    The latest version is 3.4.5.
    Well it looks like I now have lost my aperture library, had to open iphoto to use it.!
    Have you opened your Aperture ibrary with a version of iPhoto that is newer than your Aperture version? The versions of Aperture and iPhoto must be compatible, to be able to use the same photo library with both applications. To use both Aperture and iPhoto on the same library you would need to have iPhoto 9.4.3 and Aperture 3.4.5.

  • How can I create a scrolling effect where when the user scrolls down the image will blur out?

    How can I create a scrolling effect where when the user scrolls down the image will blur out?

    Hi there,
    You can create a scroll motion where the image will fade out on scrolling, you need to use the Opacity tab under Scroll Effects Panel.
    If you particularly need the image to be blur out, then you need to edit that image in any image editing program and make one copy of that image as blurred, then place both images (actual and blurred) on that page and use scroll motion or fade option to replace images.

  • How do you create an array without using a shell on the FP?

    I want to be able to read the status of front panel controls (value, control box selection, etc.) and save it to a file, as a "configuration" file -- then be able to load it and have all the controls set to the same states as were saved in the file. I was thinking an array would be a way to do this, as I have done that in VB. (Saving it as a text file, then reading lines back into the array when the file is read and point the control(s) values/states to the corresponding array element.
    So how do I create an array of X dimensions without using a shell on the front panel? Or can someone suggest a better way to accomplish what I am after? (Datalogging doesn't allow for saving the status by a filename, so I
    do not want to go that route.)

    Thanks so much m3nth! This definitely looks like what I was wanting... just not really knowing how to get there.
    I'm not sure I follow all the icons. Is that an array (top left with 0 constant) in the top example? And if so, that gets back to part of my original question of how to create an array without using a shell on the FP. Do I follow your diagram correctly?
    If I seem a tad green... well I am.
    I hope you understand the LabVIEW environment and icons are still very new to me.
    Also, I had a response from an NI app. engineer about this problem. He sent me a couple of VI's that he threw together approaching this by using Keys. (I still think you are pointing to the best solution.) I assume he wouldn't mind m
    e posting his reply and the VI's for the sake of a good, thorough, Roundtable discussion. So here are his comments with VI's attached:
    "I was implementing this exact functionality this morning for an application I'm working on. I only have five controls I want to save, but they are all of different data types. I simply wrote a key for each control, and read back that key on initialization. I simply passed in property node values to the save VI at the end, and passed the values out to property nodes at
    the beginning. I've attached my initialize and save VI's for you to view. If you have so many controls that this would not be feasible, you may want to look into clustering the controls and saving the cluster as a datalog file.
    Attachments:
    Initialize_Settings.vi ‏55 KB
    Save_Settings.vi ‏52 KB

  • How do I create a new account and get stuff from the old account to the new account

    How do I create a new account and get stuff from the old account to the new account

    There are instructions on this page for creating a new account : Set up an Apple ID in iTunes
    Or if you don't want to give credit card details : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
    But you won't be able to transfer purchases from your old account to it, all content that you download from the store will remain tied to the account that downloaded it.

  • HT4528 how do I create an event in my calander that repeats the second thursday of every month

    how do i create an event in my calander that repeats the second thursday of every month

    This should get you started down the pathJust replace User data with your cluster and do the data integrity check in the value change event use a simple one button dialog to notify the user which values are out of compliance and disable and grey the OK button untill all conditions are met.
    Jeff
    Attachments:
    Prompt(Date).vi ‏50 KB

  • How do I create a button in a selction screen of the report ??

    how do I create a button in a selction screen of the report ??

    See sample Program :
    REPORT ZLPRWINSPC_TMP .
    tables : mara,
             sscrfields.
    select-options s_matnr for mara-matnr.
    initialization.
    sscrfields-functxt_01 = 'Clear Selection'.
    selection-screen function key 1.
    AT SELECTION-SCREEN.
    case sscrfields-ucomm.
    when 'Clear Selection' or 'FC01'.
    clear s_matnr.
    refresh s_matnr.
    endcase.
    Reward Points if it is helpful
    Thanks
    Seshu

  • How do i create a drop down menu for selecting from the drop down arrow

    how can i create a drop down menu so that when i click on the arrow in the cell i can select from the menu that appears

    katiesandell wrote:
    how can i create a drop down menu so that when i click on the arrow in the cell i can select from the menu that appears
    Hi Katie,
    Welcome to Apple Discussions and the Numbers '09 forum.
    Numbers vocabulary for this feature is a "Pop-up Menu". It's available as a Cell Format, and is set and edited in the Cell Format Inspector.
    See "Using a Checkbox, Slider, Stepper, or Pop-Up Menu in Table Cells" starting on page 96 of the Numbers '09 User Guide.
    This guide, and the equally useful iWork Formulas and Functions User Guide are available for download through the Help menu in Numbers.
    Regards,
    Barry

  • How do I create a still photo from a video in the new iMovie?

    How do I creat a still photo from a video in the new iMovie?

    I'll assume you want to create a still to use outside FCPX, not a still frame within FCPX.  It's kinda hidden in the "share."  Go File/Share/Add Destination.  You want "Save Current Frame."  After you've created that destination, it'll be there for you in the future under Share.

  • How Do I create Windows Form file in VS and add the form to my VS project?

    C#, How Do I create Windows Form file in VS and add the form file to my VS project by using C# code?
    I like to create a Windows Form file into my VS Win Form project by using C#. I have the path and the file name.
    I need a Win Form with FileName.cs, FileName.Designer.cs, FileName.resx, and FileName (as you see it VS by adding a Win Form manually by using VS)
    Rune Brattas

    You cannot create a Form from code at run time. 
    For one thing, the user running your application will, almost certainly, not have  a copy of Visual Studio to hand with which to build anything.  (Not that you actually need 'Studio at all; Notepad and csc.exe are all you actually
    need), but that's another story).
    You can do this with an awful lot of pain, using the innards of the compiler from iside your own program, compiling the new Form's source code on the fly and then executing the resulting assembly within your application.  IMHO, that's a simply terrifying
    prospect especially as the code you will be compiling will be on someone else's machine and over which you will have absolutely no control.  If you're lucky, they'll spell something wrong and it won't compile.
    The "usual" way to do this sort of thing is to create additional, "plug-in" forms as library assemblies and have your program load and execute these at run-time. 
    Regards, Phill W.

  • My daughters computer crashed along with her itunes library.  She can plug it into my computer so how do we create her account on my computer?  When we plug it in, it wants to replace her nano songs with my library.

    My daughters computer crashed along with her itunes library.  She can plug it into my computer so how do we create her account on my computer?  When we plug it in, it wants to replace her nano songs with my library.

              Not quite surewhat your asking exactly. You look here for different ways on importing media from nano to your computer! https://discussions.apple.com/thread/2417169?start=0&tstart=0

Maybe you are looking for