How do I create an alert for a collection?

Hi,
I created a collection that queries computers with Endpoint definition files of 7 days and older.  Now, I want an email alert daily what computers are in that collection.  How do I do that?
Please give me some steps if possible because I am not familiar creating an alert.
If you have an alternate/easier way, my goal is to receive email alerts of computers with old Endpoint definiton files 7 days or older.
Thanks!

Hi Jeremy,
So I created a report and it shows under Subscriptions (just like how it was instructed).  I also check Administration \ Site configuration \ Sites \ Configure Components \ Email notifications and tested, all is good.
I noticed that under "Report Delivered By: I only have "Windows File Share".  No Deliver by Email option.
I see that the report ran as how I wanted it.  The result was there but where is my email? Am I missing any more steps?
Thanks for your help in advance!

Similar Messages

  • BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

    Hi All.
    I have this request.
    BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
    We have jobs scheduled on BODS running smoothly and absolutely fine.
    But to check, i am logging into the admin console and check for the jobs status.
    I would like to have an email to be received from BODS after each job is finished.
    It could succuessful. Or it could fail.
    Whatsoever, i wish to receive an email alert as soon as a job is finished.
    Can anyone advise me as to whether this could be made possible.
    And if yes, how this could be done.
    Thanks for your help in advance.
    In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
    Is there any option similar to that in BODS ?
    Also would like to know :
    how to use the smtp_to or mail_to functions ?
    how to set up the smtp server for this ?
    thanks
    REgards
    indu
    Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

    Hi.
    Since am new to this BODS. I need some help.
    I already have many jobs which are running absolutely fine.
    And when a job runs, and finishes, am able to see the trace saying
    e.g. :
    Job_abc is completed successfully.
    We got the smtp service activated for our test server.
    and we hae a group email id.
    I have put the details of the smtp server / ip address / and said apply restarted.
    The i created a simple test script as below :
    print (' Before email ' );
    smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
    ' the job has failed', 0, 0);
    print('After Email ');
    It does send a email to as per smtp_to whatever email is specified.
    But how to differentiate between a job success
    And a job which has failed.
    I wish to have a mail which says on the subject :
    'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
    ==> IF it is a success
    OR
    'Job ' || job_name() ||' on ' || host_name() || ' has failed'
    ==> if it has failed
    How to make the system identify, whether
    to send a success message or a error message whatever
    Could anyone advise.
    thanks
    indu

  • How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

    Hi, this question has been answered for 2013. The answer here suggests that it can be done in  2010.
    See:
    http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
    Who knows how?
    Regards
    Sander

    Hi Sander,
    As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • How can i create a Trash for external USB Drives ?

    Hello,
    how can i create a Trash for external USB Drives or my TimeCapsule ?
    Thanks.

    You do not need to create trash cans for individual drives.  The trash can on the desktop holds deleted files from all mounted drives.
    TimeCapsule manages its own space.  If it fills up it will delete older backps to make space for newer ones.

  • How can I create a form for users wherein the text field will expand to accommodate additional text?

    How can I create a form for users wherein the text field will expand to accommodate additional text?

    You need to use LiveCycle (PC Only) to create a dynamic form like that.
    The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

  • HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

    iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.  I've seen reference to the  "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app.  I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for.  I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air.  Any help would be greatly appreciated.

    If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

  • How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

    How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

    I have the same problem with my iPhone.  I set up a recurring calendar event for every Thursday.  That event is no longer happening during the summer, so I went in and chose one from the current month and selected Delete.  Then it gve me two choices, one of which was to Delete All Future Events of this one, and that's what I chose.  I figured, this way, I'll still be able to see the ones from the past, but won't have to see (or hear the alert) for the future ones.
    The following week, my phone alerted me to the appointment, and even showed it on the initial screen, even though it wasn't in the calendar.  I went in to the calendar and NOTHING was scheduled for that day.  So why is this happening?
    So I set up a new recurring event, for in the past, then went in and deleted all furture occurances, and it did the same thing... still alerted to an event that was no longer in the calendar.
    I hope somebody else has found a fix, or at least a reason for why this is happening.

  • I've never used garage band. How do I create a ringtone for my new Iphone4s?

    I've never used garage band. How do I create a ringtone for my new Iphone4s?

    Onefineday wrote:
    How do I create a ringtone for my new Iphone4s?
    this explains how:
    http://www.bulletsandbones.com/GB/GBFAQ.html#makeringtone
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • HOw do I create a ringtone for iphone5 using the new itunes

    How can I create a ringtone for my iphone 5 using the newest version of itunes. Thanks

    This article takes you through the process
    http://www.simonblog.com/2012/12/01/itunes-11-how-to-create-free-ringtone-and-te xt-tone/

  • HT1660 How do I create a library for a second iPod?

    How do I create a library for second iPod?

    See How to use multiple iPods, iPads, or iPhones with one computer for the official suggestions. In practice a single library with each device syncing to one or more playlists is much the easiest way.
    tt2

  • How do i create mailing labels for an avery template using pages

    how do i create mailing labels for an avery template using pages.

    mcc,
    The first topic in the "More LIke This" box to the right of your question is a rather comprehensive address label printing discussion. Does it answer your question?
    Jerry

  • Xcode ERROR: Failed to create an alert for ID "enabled" based on defaults: 1

    I installed OX 10.8 and xcode 4.4 and when I run any simple application for simulator it generated error in console:
    Xcode[7808]: ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
    I reinstalled with clean xcode, but it did not help.  I see the building freeze when "coping 2 of 2 resources to product
    Also, xcode freezes when I jusy click on Mainstoryboard.storyboard file.
    I found a few posts with the same ERROR but no clear fix.  Any help will be appriciated.

    Hi, i had the same problem yesterday and after searching I found no solution to this error.
    Today i just burned the original Mountain Lion.dmg to a portable hard driver then reinstall the OS. And it seemed that the os had been restored and the error had been fixed.
    And, i guess there's some app that changes some documents of the system. So when you rewrite the os, u get the bug fixed.
    Good luck to you guys.

  • How do i create a password for apple tv? it doesn't accept my itunes password

    how do i create a password for apple tv? it doesn't accept my itunes password

    no to access itunes store you need the appleID and correct password
    but to access the internet you need the password for your wifi network

  • How can mass create batch classification for many material batches? ?

    Hi Experts,
    In our system , there are so many material batches which have not been classified，see by
    BMBC Tcode.
    That means these batches has no values in the batch class. I know we can create
    classification for these batches with MSC2N Tcode.
    But there are so many batches  which have not been classified,more then 2000.
    It is not possible to create classification for every batch with with MSC2N once a time.
    So how can I create batch classification for so many batches once a time?
    How can I mass create batch classification for so many batches??
    Thanks for any reply!

    Hi,
    Please be aware that SAP does not support the use of batch
    input in the classification system. SAP recommends you use BAPI's for
    example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
    would be able to help. For more information, please have a look at the
    note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
    I hope this helps!.
    Best Regards,
    Arminda Jack

  • How would I create buttons states for MCs I am creating abstract MCs

    I am creating a generic website that would have abstract MCs that would load jpg or TXT fields for the user interface to allow for fast updates to the site. The MCs that would make up the user interface would be empty and load things into it using XML or PHP later on. How would I create button states for the user interface MCs.  I started creating a function for every MC button state but I thought there might be a more efficient way.
    would creating a array help in this case?
    and is using URLRequest the way to link to pages with in a movie well the flash movie that is the site it's self?
    /*---------------------------- THE START OF MY ACTION SCRIPT ------------------------------*/
    var waywardLogo_mc:MovieClip = new MovieClip;
    var theCollection_mc:MovieClip = new MovieClip;
    var newsPage_mc:MovieClip = new MovieClip;
    var whatthe#$@!doyouwant!?_mc:MovieClip = new MovieClip;
    /*---------------------------- onOver ------------------------------*/
    waywardLogo_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
    theCollection_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
    newspage_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
    whatthe#$@!doyouwant!?_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
    /*---------------------------- onOut ------------------------------*/
    waywardLogo_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
    theCollection_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
    newspage_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
    whatthe#$@!doyouwant!?_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
    /*---------------------------- onClick ------------------------------*/
    waywardLogo_mc.addEventListener(MouseEvent.CLICK,onClick);
    theCollection_mc.addEventListener(MouseEvent.CLICK,onClick);
    newspage_mc.addEventListener(MouseEvent.CLICK,onClick);
    whatthe#$@!doyouwant!?_mc.addEventListener(MouseEvent.CLICK,onClick);
    function onOver(event:MouseEvent):void
    event.target.alpha = .5;
    function onOut(event:MouseEvent):void
    event.target.alpha = 1;
    function onClick(event:MouseEvent):void
    event.target.URLRequest("");
    /*---------------------------- onover, onOut, onClick buttonModes ------------------------------*/
    waywardLogo_mc.buttonMode = true;
    theCollection_mc.buttonMode = true;
    newspage_mc.buttonMode = true;
    whatthe#$@!doyouwant!?_mc.buttonMode = true;

    click insert/new symbol, tick movieclip, assign a name, tick export for actionscript and in the class textfield enter a name (say ButtonClass) and click ok.
    attached to the first frame of your new movieclip, type stop() in the actions panel.  put whatever graphic you want on-stage for your button's up stage.  create another keyframe, label it "over" and put whatever graphic you want for button's over state on-stage.
    in a layer above those graphics, you'll probably want to add a dynamic textfield so each of your buttons can have different text.  assign the textfield and instance name (say tf) and extend its timeline to the last frame of your movieclip button.
    then when you want to create a button, on your timeline you can use:
    var b:ButtonClass=new ButtonClass();  // these two lines need to be entered for each button
    buttonhandlerF(b,someX,someY);
    //-------code between dotted lines only needs to be entered once no matter how many buttons you add --------------------
    function buttonhandlerF(b:ButtonClass,x:Number,y:Number){
    b.addEventListener(MouseEvent.MOUSE_OVER,overF);
    b.addEventListener(MouseEVent.MOUSE_OUT,outF);
    b.x=x
    b.y=y
    addChild(b);
    function overF(e:MouseEvent){
    e.currentTarget.gotoAndStop("over");
    function outF(e:MouseEvent){
    e.currentTarget.gotoAndStop(1);
    //-------code between dotted lines only needs to be entered once --------------------
    // you'll also want to create a click listener and listener function
    the code between the dotted lines is amenable to being added to a ButtonClass.as class file if want to expand your capabilities.

Maybe you are looking for