How do i create an image to look like a negative strip?

How do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.

Maybe you had installed an action into your previous version of photoshop elements?
Anyway here's an action that will work in pse 11, although the look is a little different.
http://photoshop-action.no/specialfx.htm
Also, some from panos fx
http://www.panosfx.com/commercial-free-photoshop-actions/film-machine

Similar Messages

How do i create an image in PSE11 to look like a negative strip?

How do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.

This is not the "PSE" forum.
You want the Ps Elements forum across the hall:
http://forums.adobe.com/community/photoshop_elements

How can I change an image to look like a watercolor painting?

I'm using FW CS6 and need to change an image (.bmp, .jpeg, .jpg or .fw) to look like a watercolor painting. All help is appreciated.
-Jack Ripley

Maybe you had installed an action into your previous version of photoshop elements?
Anyway here's an action that will work in pse 11, although the look is a little different.
http://photoshop-action.no/specialfx.htm
Also, some from panos fx
http://www.panosfx.com/commercial-free-photoshop-actions/film-machine

How can I create a text reveal look like a sharpie mark being erased, ala the Zero Dark Thirty trailer title cards?

Hey all,
Fairly new to AE, but I am looking to create an animated slide show for a documentary wherein the title card text reveals itself in a way that looks like it's declassified - Sharpie marker being erased - ala the Zero Dark Thirty trailer title cards.
ZERO DARK THIRTY - Official Trailer - In Theaters 12/19 - YouTube
Any help would be greatly appreciated.
Regards,
Dan.

Simple Stroke-based wipes with a measure of Roughen Edges thrown in on top of Brush strokes created in Photoshop or Illustrator using Bristle/ Art Brushes. Basic stuff. Just typing in "stroke reveal" on a web search will hit you with gigazillions of tutorials.
Mylenium

How can I create a button that looks like this?

Hey everyone,
I'm trying to create a button in photoshop for a web project I'm working on and I found something similar to what I'm trying to do already being used online. I'm trying to get something similar to the bottom row of buttons in this image:
The bottom row of buttons uses a gradient overlay effect... but there is a small darker area in the top left corner of each of those images. It looks to be exactly the same in each image... meaning I'm guessing it's not hand drawn with something like the burn tool?
How would I go about doing something similar? What's the easiest way to reproduce the effect shown above keeping it consistant from button to button?

One way is using layers.
Color layer on the botton so changing colors simply change color layer.
Place all your image effects on the overlying layers.

How do I get an image to look like this?

I have seen an image on a homepage of a shipping container website that says 50,000 containers sold blah blah. Anyway I want to be able to create a similar effect of making the image darker so that my text over the image will pop more but I don't know how to do this is Photoshop - can someone give any tips please? Would appreciate it!!!
[ probable spam link removed by administrator ]

Please post a screen shot of the graphic element(s) in question.
("blah blah", really?)
In general, darken the layer underneath to your taste using your tool of choice (curves, levels, exposure, whatever) and type the white text on a layer above it.
If you don't understand these very simple instructions, you need to be taught Photoshop from the ground up, and that exceeds the scope of this or any other forum.

My iphone4 screen shows an image that looks like a negative every time there is a picture on the screen. What do I do to get it back to the normal screen?

My iphone screen shows all pictures as a negative image. What do I need to do to change this?

Settings>General>Accessibility>White on Black>Off.

How do I create an image like this?

Completely new to PS. How would I create an image like this with text? https://www.facebook.com/photo.php?fbid=10151570901245020&set=pb.50687255019.-2207520000.1 366989903.&type=3&theater
A link to a tutorial would be helpful.
Thanks!

Hi there,
Are you referring to the text, the color effect, or both?
Adding type is very easy - just grab the Type Tool from the tool bar. The article linked above provides some great tips for editing type in Photoshop.
As is the case with many "how to's" for Photoshop, there are several ways to acheive the colorized effect like the one applied to image you linked to. One method is to use Adjustment Layers, which I have outlined below.
1. With your image layer active (it will be highlighted in blue in your Layers panel, as shown below), create a selection of the area you'd like to colorize. I'm using the Polygonal Lasso Tool to create a diagonal selection - to do so, I held down the Shift key on my keyboard as a created my diagonal lines. This might take a bit of practice, but you'll get the hang of it quickly.
2. Then, in your Adjustments panel (if you don't see it, go to Window > Adjustments), click on the Curves adjustment layer, as highlighted below. Now you can play around with the curves to get the effect you'd like. (Here's a quick guide on using the Curve tool)
3. To select the other areas of your image, command (Mac) / control (PC) click on the adjustment layer thumbnail (highlighted below). Then, go to Select > Inverse.
4. Now we want to deselect part of our selection. Grab the Quick Selection Tool from the toolbar and set it to Subract from selection. Then, simply drag the selection brush over the area you want to deselect. In my case, I only want to have the upper-left corner of my image selected.
5. After you have your selection, click on the image layer and add a Curves adjustment layer like before.
6. Repeat steps 3-5 for the other corner of your image and you should end up with something like this:
The nice thing about using adjustment layers is that you can always change them - just double click on the Adjustment layer thumbnail (highlighted in step 3).
Alternatively, you can select areas of your image and fill the selections with flat colors on separate layers. You can then go in a change the Blend Mode and Opacity for each layer.
Feel free to reply with any questions!
Kendall

HT3204 I updated my iphone 4 and now it won't turn on. All i get is the itunes logo and an image that looks like the charger plug.

I UPDATED MY IPHONE 4 AND NOW IT WILL NOT TURN ON. ALL IGET IS THE ITUNES LOGO AND AN IMAGE THAT LOOKS LIKE THE CHARGER PLUG.

plumbin wrote:
.... ALL IGET IS THE ITUNES LOGO AND AN IMAGE THAT LOOKS LIKE THE CHARGER PLUG.
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download

HT2188 I'm presuming my old iPod id dead meat, but after 24 charging a get the Apple Logo followed by an image that looks like a file folder with an exclamation point. Is there anyway we can resurrect all trhe music on it & transfer into a new iPod?

I'm presuming my old iPod id dead meat, but after 24 charging a get the Apple Logo followed by an image that looks like a file folder with an exclamation point. Is there anyway we can resurrect all trhe music on it & transfer into a new iPod?

You can try putting it into Disk Mode
http://support.apple.com/kb/HT1363
If that works, you can see if the computer will recognize it when connected, either in iTunes or by the system.
NOTE: You can also try putting it into Disk Mode WHILE it is already connected to the computer.
If the iPod is recognized, you may be able to use one of the third-party methods or utilities to transfer song files from iPod to computer. You can do a Google search on something like "ipod transfer" to get some links (add "mac" to the search if your computer is a Mac).
Once the song files are on your computer, add them to that computer's iTunes library, then sync it to the new iPod.

Any idea how i restore my office email account, looks like i have moved all items to trash and now have no email account ! no time machine either

any idea how i restore my office email account, looks like i have moved all items to trash and now have no email account ! no time machine either

let's go back to your original post: what do you mean "it looks like you moved all items to trash"??
You DID move them to trash? (we can discuss WHY once we cure you)...
Can you open a window in finder and get to applications and then to utilities? Is MAIL in there?
And your "office email account"-- do you mean physical office, like place of work and you want that account in your mac mail on your computer? ~OR~ do you mean, microsoft office,mail account?
The difference is necessary to know...

How do I change what a button looks like?

How do I change what a button looks like?
I have an Arrow button that I want to change into a 'Text' Button.

"AVG Safe Search" often makes the "Enter" key not work, it may be opening their search in a new tab since they are the ones with the search by that name. Make sure that you do not have that extension see http://kb.mozillazine.org/Problematic_extensions
Actually there is more than just the one extension that AVG might install, reinstall AVG Free without the Link Scanner component as mentioned in the above link and always refuse additional baggage offered during an install -- AVG Free does not ask in the free version it just includes it and there are no options once installed in the Free version for components..
Also make sure you don't have the "Ask Toolbar" or other toolbars you did not ask for. see the same link above for Toolbar problems.
It is definitely an extension that causing the behavior you see.

,how,to,fix photos on iphone they look like negitives

,how,to,fix photos on iphone they look like negitives

The photos actually are not present twice on the phone when you do what you did. The photos appear once and then in the folder there is simply a cross reference to the photos in the photo stream

How do I change my photos to look like negatives

how do I change my photos to look like negatives. I do have photoshop elements

Use a photo editor - PSE may be able to do that - check with Adobe suatomer support for PSE support
LN

How can I make my BlackBerry 8800 looks like BlackBerry 8900 or Bold?

Hi again,
Umm.. How can I make my BlackBerry 8800 looks like BlackBerry 8900 or Bold?
Thanks....
Solved!
Go to Solution.

Hey janvaughnquero11,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
The BlackBerry 8800 smartphone has 4.2 or 4.5 software as the latest. BlackBerry 5, 6 or 7 device software is not available for that model.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How do i create an image to look like a negative strip?

Similar Messages

Maybe you are looking for