How do I create, and send a group email on my iPhone?

How do I create, and send a group email from my iPhone 4?

How to send group email without additional APP
Just spent an hour on ichat. Long and short....can't send group email. The group name appears in the TO: line, but if you click on the group name, only the first email address is blue..the rest are black and will not get the email. We tired using the CC and BC lines...same result.
However here is one solution:
I sent one email with each of the group (we are only 9 ) in the TO: line. I included my primary email. When it came to the iphone, i moved it to one of the subfolders. (Each account you may have has a list of the inbox at the top and Account at the bottom. ... that is where you can access the subfolder)
I moved the email with all names to that subfolder. I can then, open it ...do a relpy to all and just change the message and subject line. It is cumbersome, but it does work. I really think Apple, a company committed to ease of use, needs to review this flaw. I suspect it may be a bandwidth economy .... and i feel the pain of the providers...but you did create the beast.

Similar Messages

How to use rule and send the same email to multiple recipents

Hi,
My requirement is to send the workitem to the multiple recipents. one of my reiend suggest me to use the rule but i don't know how to use that .
can any one of you suggest me how to use rule in workflow.
Also i want to send the same email to multiple recipent .how can i do it by using the multiline variable...please advice me with example if possible..
Note :- Is it necessary to saparate the email id with comma or i will add all the email next one another..
Please suggest.
Thanks in advance ,
Anand

Hi Anand,
I would suggest you first follow the guidelines of the forum and a little searching. One of your questions has been asked just a few threads below.
Regards,
Martin

Sending out group email from iPad iPhone

I have groups in contacts but cannot send 1 email to all as a group on iPad iphone
Thanks

Work Around:
On your mac:
1. Open a new email
2. Insert name of an existing group into one of the "To" fields as usual.
3. Highlight all the resulting names in the "To" entry
     [Highlight first name, and while holding shift, highlight last name and all will highlight[]
4. Copy (Command C) the highlighted emails
5. Paste (Command V) nto a pages document
6. Remove the name and anything else preceeding the first < and also the first < of only the first entry whixh will look like this:
     [email protected]>,
7. Remove the > of the last email which will look like this:
     , Jane Doe <[email protected]
8. Copy the entire altered list from the pages document
9, Go to Contact Book and click + to add a new entry
10.. Name the entry (XXX Group for iPad) or whatever you wish to call it
11. Paste all the copied altered list into any one of the email entry spaces
12. Click on "Done"
13. Create new email On iPad and click on + in any one of the "To" lines and search for "XXX Group for iPad" You cannot just key in XXX Group for iPad!!!!!!!, you must use + contact search.
14. Enter the selected iPad contact group into the "To" line.
15. All the entries will now appear in the "To" line and you are good to go.
Adding or deleting email addresses from the iPad group:
Easiest: Alter the original mac group in the usual way and repeat steps 1-14 above. It seems impossible to edit within the emai line of the iPad contact entry.
Rediculously simple once figured out.
Happy emailling, but please send Bcc so that you don't spread your groups' email addresses all over the internet for spam, viruses, and other unwanted emails. Be considerate and ask your recipients to notifiy you if they wish to be deleted from the lists you compose.

How do I create and send a zip file? I have Lion and I'm working in Word for mac

To show you how little I know about any of this, I don't even know if this is the correct forum in which to ask this question. I'm a copywriter. I have a client in France. I have 15 word documents, 15 of the same documents in PDFs and a small Excel document to send him. Simple, mutlipage Word docs. Short two-page Excell sheet. I want to create a zip file for them to send to him. Can I do it? How? I have unzipped zip files other people have sent to me, but I've never created or sent one myself. I'm working in Word for Mac 2011. I have Lion. I'm using Mac's email. Please don't assume I know anything. I need very, very simple, play by play instructions. You are all very helpful, so I have high hopes.
Nancy

Visit:
http://download.cnet.com/MacZip/3000-2250_4-10025248.html
You will be able to both zip and unzip. If the recipient of your zipped file does not have zip, he/she will need to get it, or you could send him/her the above address so that he/she can unzip his/her file.
(I wish the English language could settle on the use of something less clumsy that he/she him/her etc.)
BTW, I think that you can zip only folders, not separate files, so put even one file into a folder before zipping).
Message was edited by: SteveKir Added BTW

TS3899 How do I send a group email and not have to select each person

How do I send a group email without having to select each person separately

Hi Blair
You dont need to use a server, but you will probably need a group emailing app of some sort to help you.
There are a number of apps available on the App Store. Most will only let you send email from inside their own app, but MailShot Pro uniquely creates special contacts that you can use right from the Mail app, and tens of thousands of compatible apps, building group email right in.
You can find the app at https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?ls=1&m t=8, a free version is also available, which can only create a few, smaller groups, but can be upgraded.
Peter
Soluble Apps
Disclosure: I am the developer of MailShot Pro and may benefit from its sale.

How to send a group email and have the recipients hidden?

How do I send a group email and have the recipients hidden?

I have a new OSX 27" iMac that is running Maverick.
RE: group emails, I am trying to omit individual recients and have tried the following options without success.
1) Mail- Composing- checked "Automatically- Bcc"
2) Mail- Composing- unchecked "when sending to a group, show all member addresses"
The result is that all names continue to show up with email addresses for group emails.
HELP! HELP! HELP!
Lynn

How to create and send clob value to SP?

Hi,
Does any one of an example of how to create and send
a clob value(as a IN parameter to storedprocedure) from JAVA to
the StoredProcedure. I need the JAVA code.
null

Hi
Following is sample code you can use.
DECLARE @testID Int
DECLARE @year int
DECLARE @testtype datatype
SELECT @testtype=testtype from yourTable Where Your condition
SELECT @year= year from yourTable Where your conditon (you need to make sure you assign or get @year variable )
SELECT @testid=id from test where year=@year and testtype=@testtype)
Hope this helps
Regards

How to send an group email with text and photo with out having google trash it

how to send a group email with imac 21.5 8.1 Yosemite gmail without having it trashed automatically

Check the settings on the machine(s) that are trashing it.

How can I send a group email to ensure privicy for recipients?

I am trying to send a group email to all my address contacts that does not show any other of the group contact information on the email. Can anyone tell me how to do this effectivly. I receive loads of emails each day from corporate groups that do this to me so I see who else they sent the mail to but I don't know hoe to do it to my contacts. Help please....

There is a potential security flaw in the BCC feature.
According to the conventions of the SMTP protocol, all addresses, including BCC addresses, are included in every email as it is sent over the Internet. The BCC addresses are stripped off blind copy email only at the destination email server. Therefore, if the addressee controls their email server or can access it, they could examine the BCC addresses on every email they receive.
Very occasionally, an email server will be misconfigured and not strip off the BCC list on email it sends to its local users, revealing the complete blind copy address field to users that receive the email at that domain. Therefore, BCC is very good but not perfect at keeping addresses confidential, and should not be relied on for the most critical and sensitive of communications.

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

TS3276 how to send a group email with iPhone 5

how to send a group email with iPhone 5

I have a new OSX 27" iMac that is running Maverick.
RE: group emails, I am trying to omit individual recients and have tried the following options without success.
1) Mail- Composing- checked "Automatically- Bcc"
2) Mail- Composing- unchecked "when sending to a group, show all member addresses"
The result is that all names continue to show up with email addresses for group emails.
HELP! HELP! HELP!
Lynn

How do I send a group email messages then save it for later???

How do I send a group email messages then save it for later???is there a way that i can save couple of people for whenever want to send an email for them by clicking on my save group get access easily to specific people.
Thankssss

You can set up email groups in Contacts. The articles says Address Book (Contacts old name), but it still works.
Contacts – Create Mail Group

How can I design and send emailers using Adobe Muse?

Hello Geeks,
How can I design and send emailers using this wonderful software called Adobe Muse?

Hi
Are you referring , creating email templates or sending marketing campaigns ?
We cannot create templates as Muse doesn't output HTML optimized for e-mail output.
Regarding email campaigns, you can setup this from hosting platform end.
More details :
https://forums.adobe.com/message/5469744
Re: Is it possible to create email templates using Muse?
Thanks,
Sanjit

I recently updated to Lion and iCloud and am unable to send a group email for my blog using BCC. When I try to do so, the email goes directly to draft. Please help.

How can I send a group email for my blog to using BCC on my mail program?

Don't use bcc, use cc instead. Better yet create a new group in Address Book, put the contacts you want into the group, then when you email select the group in the To: field instead of putting in individual email addresses.

Create and send an email as a delegate using EWS Managed API

Hi All,
I would like to create and send an email as a delegate using EWS Managed API for that i have crated one user as a delegate to that mailbox owner.
after adding user as delegate, when i try to create an email The EmailMessage class taking only FolderId as parameter but not taking Mailbox object as parameter. But in web reference they said that EmailMessage taking FolderId and Mailbox object as parameter.
EmailMessage message = new EmailMessage(service);
message.Subject = "Company Soccer Team";
message.Body = "Are you interested in joining?";
message.ToRecipients.Add("[email protected]");
message.Save(new FolderId(WellKnownFolderName.Drafts, new Mailbox("[email protected]")));https://msdn.microsoft.com/EN-US/library/office/dn641963(v=exchg.150).aspx#bk_createewsmacould you people please help me on this?ThanksNaresh

Thanks for reply glen.
I have added delegate using Add-MailboxPermissions. Now i am able to save an email in mailbox owner drafts
folder.
Glen,
I have a one more question.(I am using EWS Managed API).
I(owner) have shared my calendar(eg. samplecalenderfolder) with another user(delegate) (i.e.,he is the
delegate of my mailbox) and i have given only permission to the this folder(samplecalenderfolder)
only and the permission level is Reviewer.
if i login with user(i.e.delegate) i am not able to get the shared calendar folders(i.e.,samplecalenderfolder)
that what i a have shared.
below is the code snippet i am using to get the calendar folders.
Folder folder = Folder.Bind(service,WellKnownFolderName.Calendar);
FindFoldersResults addtionalFolders = service.FindFolders(folder.Id, new FolderView(10));
could you please tell us how to get the shared calendar folders.
Thanks
Naresh

How do I create, and send a group email on my iPhone?

Similar Messages

Maybe you are looking for