How do I create Blu Ray Disc with DVD Studio Pro ?

Folks, I think that I'm in trouble... I created 3 HD projects with DSP (i do not have the tapes and fcp project anymore, neither the HDV 1080i mov file) and I need to be burned it with a Blu-Ray Media, and play it with a BR Player... So far I made the following steps:
1-) In FCP, I exported some Quicktime Movies with HDV 1080i60 codec (movie with chapters, menu bg movie, extras).
2-) In Compressor, I used the preset HD MPEG-2 19,0 MBPS for videos, and Dolby digital professional 2.0 for audios.
3-) In DSP I created a HD DVD Project (DISC window, GENERAL tab, DVD STANDARD = HD DVD; DISC WINDOW, DISC/VOLUME tab, DISC MEDIA = BLUE LASER, LAYER OPTION = OTP) with movies, extras, menus...
4-) In ADVANCE BURN (under FILE MENU) I chose BUILD.
5-) Now I got a HVDVD_TS folder, with my movie compilation...
NOW, my doubt is... The folder HVDVD_TS can be burned on a BR Media and be played on a BR Player ?
If not, what can I do with my HVDVD_TS folders to be compatible with Blu Ray ?
thanks a lot for any help.
Best Regards
Marcelo

That can't be done. Get the tapes back and start over. Get the new Toast in the tutorial I posted to make a Blu ray disc.
You could try this tool to demux the streams, transcode to QT then re-encode for Blu Ray but I wouldn't go that direction unless you know what your doing. You would also be encoding twice which is not good.
Get the original source back and go the toast route from the start.
Message was edited by: Eric Pautsch1

Similar Messages

Problems creating Blu Ray Discs with AME Presets in CS4

After several weeks wasted (months back) with an ATI 5750 graphics card in Win 7/and CS4 (not working correctly) - I finally resolved by swapping with a NVidia GTS250 card .....but all my troubles are not over yet ....
I'm running Premiere CS4 and have finally just got down to testing creation of a Blu Ray test disc from some AVCHD 1920x1080 HD footage I am editing from my new camera.
My work in CS4 is just testing at present as I used to use CS3 [still have on my dual core machine with Matrox RTX2] - and have successfully created Blu Ray discs from HDV material in CS3 - but using Blu Ray MPEG 2 settings.
New machine Win 7 - 64 bit
Premiere CS4 is at 4-2-0 version
Encore at 4-0-1 version
These are the last updates
I've selected a short test piece (about 2 mins)on Premiere timeline and initially tried Media export using Adobe Media encoder.
I selected H264 BluRay codec in media encoder. Hi quality 1080 25 fps.(PAL)
This creates dual MP4 Video and Audio streams
Encode process goes OK, just slightly slower than real time, (I'm using i7-930 Quad Core and Win 7 64 Bit)
Now - when I come to input the encoded video file into Encore as an Asset - Encore freezes and the whole machine locks up !!!
Audio file imports OK but the Encore software does not like the encoded Video file
I've re-installed Premiere and Encore twice in case of bad install. It wasn't that.
I also found Adobe Media player couldn't play the file created by AME either - but it would play on a Premiere timeline?
So is Adobe Media encoder messing up here ?
So - .....3 hours of testing later ....I stumble on a Support thread from someone on the Forum that they found AME preset has "HIGH" in the Encoding Profile Preset - when it should be MAIN ?.
Not sure what these settings do - but tried changing that parameter and re-encoded the Video file with H264 BluRay setting - all to no avail as when I try importing again the machne just locks up ?
My final search in Premiere help file about creating BluRay discs ONLY talks about using MPEG 2 BluRay setting for creating BluRay discs
It does not specify H264. Why is that?
Can one of the moderators / experts confirm if H264 Blu ray format is supported for BluRay disc creation in CS4 please??
Better still please tell me the exact settings for Adobe Media encoder so it will import into Encore without having to be transcoded again.
H264 should work - yes ?
Final comment
As an alternative method, I tried sending the short timeline in Premiere (using Dynamic Link) to Encore to test that route for making a BluRay disc
Bearing in mind the sequence is only about 2 mins long - when I ty to Transcode using the engine within Encore - the process takes a ridiculously long time and twice it has crashed just before the end of the process......
Can someone explain why the encode process in Encore takes such a long time as I thought it used the Adobe Media encoder engine as well.?
Adobe Media Encoder is much faster used stand alone mode.
Encore seems to not use that ?
Anyway - conclusion is that using Encore to encode the tmeline is a non starter as it takes too long.
why so slow on such a fast machine?....I know HD encoding is demanding but not that demanding with a decent machine.
So the question is ....
How do I encode in the most efficient and fastest way possible (using H264) for Blu Ray authoring into Encore without need for more Transcodes?
Any help or suggestions welcome as I'm now hitting my head against the wall :-)
I have not gone through Adobe Support desk as it is usually a waste of time.{Dear VP of Adobe Customer Service - please do get this sorted out in the near future if you want to retain loyal customers....}
I cannot believe how disappointing CS4 is turning out to be.
After investing in a very fast PC machine etc the whole user experience is somewhat of a let down.
Why so many issues for such a small test??

Picking up on my original post about H264 - as I have a dual boot machine I also have a clean installed Win 7 /64bit partition which I use for general bits of work.
On that I have CyberPowerDVD SW installed which plays all Video files fine including BluRay material etc.
Interestingly when I try to play the file that AME has created from the BluRay H264 preset it says 'It cannot play the file as it is a format it does not recognise...'
This is really weird and would suggest AME is not encoding the file corrrectly??
I have already removed and made a re-install of CS4 on my main [video editing] partition but there were some fragments of CS4 left intact
How do I completely remove everything?
I tried the CS4 clean script but it said it relied on Microsoft CLean Up utility and gave a link
When I loooked on Microsoft web site the link to download it had been removed?
Also Adobe say the CS4 remove script is no longer supported ?
Can anyone advise on the correct tool/procedure to completely remove CS4 from a Win 7/64bit installation so I can then try re-install of CS4 one more time....in case the installation is corrupt in some way
I can't explain why I am having this problem otherwise if other people find AME encodes OK with H264 BluRay preset.

Blu Ray yet for DVD Studio Pro?

I haven't asked recently about burning Blu Ray discs in a new version
of DVD SP, so here I am asking again: Has anyone heard any scuttlebutt
about a possible upgrade of DVD SP 4 to allow to burn HDV FCP QT movies
to Blu Ray discs? Toast 10 has been working fine for me so far, but curious
if Apple has hinted at changing their minds and endorsing Blu Ray as an
option?

I do bet my business on it. But by the sme token, having a business means making sure you have back-ups and rotating hard drives also. I had some of the first CDs ever made, and many of them are failing, even some of the more recent ones from the mid-1990s. And these do not include the burn your own.
Blu-ray as a storage method makes no sense to me personally. Right now they each hold 25 Gigs (as you said), which means 40 of them - or $280 - for one Terrabyte. You can get 2 1.5 terrabyte drives for $200 and they will take up alot less room than 40 blu-ray discs.
I would bet neither hard drives or blu-ray will be around in 20 years, and if I was going to bet, it will be alot shorter than that. It will be SSD, Compact Flash, downloads and whatever follows. blu-ray and DVD will be like my Zip drives, Jaz drives or VideoDiscs.
If anyone has a business that deals with media storage where it is important, I would steer them away from DVD/blu-ray and tell them to get a good RAID 1 external, with automatic mirroring, three hard drives and rotate them with one copy off-site. There are enclosures where they a popped in and out like floppies and you store them in something similar to a VCR case.
Like I said, YMMV.

Burning a Final cut Pro X Project with DVD Studio Pro

Hi,
A project edited in Final Cut Pro X and Compressed with Compressor 4, can you then burn to disc with DVD Studio Pro?
I have DVD Studio Pro on my system but when I burn the project to disc using DVD Studio Pro it crashes all the time.
I'm wondering if DVD Studio Pro is not compatable with a 64 bit system?
Advise is appreacated.
Barry

Thanks Tony that did it, I was using Burn but when I went to Build/Format the disc burned as it should, thanks
Barry

How to burn blu ray disc with H264 files and ac3 files?

Hello,
I have tried many times to burn a bluray disc with FCP and compressor and they always end up not successful. After spending days on testing different settings, I finally managed to only get it to work if I tried
1) outputting to Hard drive as opposed to burn to bluray
2) Turning the default bit rate down from 35Mbits to between 15-19Mbits.
Then I used either disk utility or toast to burn the disc image onto the Bluray disc.
I have however on a recent job forgotten to switch the setting on compressor to output to harddisk and instead set it to burn to Blu-ray. Big mistake. Again I end up with a h264 file and an ac3 file, and nothing I can do with them after 24 hours of rendering. Oddly, the compressor says "successful" but nothing is created but that 2 files.
My question is (before I restart the whole 24hr rendering process again) - is there anyone who can help me use the .264 file and the ac3 file and create the blu-ray disc with the menus again without having to re-render all over again? I have not been able to find anyone to provide me with a solution or find any where online that helps with that.
Desperately ...
Yee-wei

Hello,
Sorry but the instructions in the manual (online and offline) do not answer my question. Yes I do have a bluray burner, it is a matsushita BD-MLT SW-5584. I wrote in my post that when I set it to output to HardDrive, it will create a dmg file nicely for me to burn using disk utility or toast.
But when set it to burn to Bluray disc, nothing gets done. I just want to find out, with the h264 file and the ac3 file that gets created in the process of creating the dmg file, can I still burn the disc or create a dmg file from them without having to re-render the whole thing again.
Maybe you never tried burning a Blu-ray disc with FCP or compressor before. Let me explain how it works. When you submit the project to process, it will create 2 files - 1 ac3 audio file and a .264 file. After that 2 files are rendered (which takes 24hrs for my 2hr 30min HD clip), it will use that 2 files to create your Bluray disc or your dmg file. Problem occurs when it doesn't burn the disc and you are left with just the 2 files that cannot be used to burn the project again. My question is : is there anyone who knows how to set the compressor to see that the 2 files are already created and just continue to create a dmg file?
Hope my question is clearer now.

HT200139 ?How can i watch a blu-ray disc with my iMac

I accindentally bought a blu-ray, ok, but now I see it... How can i match a blu-ray disc with iMac?

Youneed some bluray software such as this:
http://www.macblurayplayer.com
I use and it seems OK, plays a wide variety of formats.
Al

Has a stop marker any function when burning blu-ray discs with Premiere Elements 12?

Stop marker when burning blu-ray discs with Pre 12. Does it works?

Amiral
No.
This applies to Premiere Elements any version.
Stop markers placed on the Premiere Elements Timeline destined for burn to Blu-ray disc format on Blu-ray disc are not recognized at playback of that disc using the Blu-ray player.
If you need Blu-ray disc with stop markers, you can export your Premiere Elements Timeline content to an appropriate file type that will be compatible with a 3rd party software which will get the job done. I have heard that a software such as DVD Architect can do that, but I have not been there and done that.
Stop markers function at playback of DVD-VIDEO on DVD disc only. And, never place a stop marker at the end of the last item on that Timeline.
http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7e 19.html
Please do not hesitate to ask if you need clarification on anything written.
Thank you.
ATR
Add On...I have found that the situation is the same for stop markers and AVCHD on DVD and Blu-ray disc format on Blu-ray disc.

Workflow asked: 70min hd project (PAL 1080i50)to blue ray disc with toast 11

i tried to render a final cut Pro HD project (PAL 1080i50) into a blue ray disc with toast 11.
At the end camera pans juddered in a fast rhythm
My steps are:
build a HD timeline in FCP
export timeline to a quicktime movie
load the quicktime movie in Toast 11
toast dit convert the qtm-file again
and burned the blue ray with the result described above.
Thanks for answers

Please examine my workflow. Perhaps you quickly find out any error:
footage: PAL 1080i50 field order : lower field
70 minutes sequence: the same options
exported timeline into a Quicktime Movie - same option
loaded the resulting QTM into Toast 11
Tost started to rerender during 2 hours and burned blue ray disc
at last
medium: verbatim double layer blue-ray disc
Player: tested on two Philips blue ray players
Result
on tv-screen (hd flat screen philips) camera pans judder in a regular rhythm, perhaps twice in a second: the actor seems making little jumps when he walks silently from the right to the left or vice versa.
earlyer we tried to burn a blue ray disc directly from FCP 7.0.3 by using the option "send to blue ray"
The result was the same.

Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?

I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering switching to Mac but will only do so if I can burn true Blu-Ray movies which are playable in an ordinary Blu-Ray player.
I have read some of the discussions on this board and it is not clear to me whether it is yet possible to burn 1080p Blu-Ray discs playable on any Blu-Ray player using Final Cut Pro alone. Can someone confirm for me whether they have done this? Some users have indicated they can only output 720p using Final Cut Pro (which is not very satisfying). Others have indicated it is necessary to use Adobe Encore. If you have to use Adobe Encore to burn, why use Final Cut Pro at all? Why not use Adobe Premier Pro for editing and Encore for burning?

David S. wrote:
And yes you can author single track 1080p blu ray discs with Compressor 3.5.
But that's not what the OP asked, "using FCP alone."
Why not use Adobe Premier Pro for editing and Encore for burning?
Well, why not just put CS4 on your PC, especially considering you already have the BD hardware?
There is no truth to the rumor that applications running on Macintosh are any more stable than the same apps a PC; all systems crash.
bogiesan

Issues With DVD Studio Pro 1.5 - MPEG2 Encoding & Building Discs

Hi.
I'm having problems encoding MPEG2 files in final cut express - everytime I try to encode, final cut closes.
Also, when I go to build and format a disc in dvd studio pro, this also closes.
I have looked at updating dvd studio pro to 1.5.2 and although I have downloaded the .bin file for the update, I don't know how to get it to run. The download is from the following link ( http://docs.info.apple.com/article.html?artnum=120138 )
If anyone could help at all, it would be much appreciated.
Thanks!

Of all the early versions of DVDSP, 1.5.2 was the most stable and you really ought to be using that if you are not going to upgrade further.
V1 was notoriously flaky. I used to chant 'Apple+S' every day when I used it, just to remind me to save... I lost count of the number of hours lost when the app hung or crashed. That version of DVDSP was built on an entirely different code base to the current version. There are still folk who prefer to use V1 despite its faults, but I am not one of them... although I do still run a version of it somewhere.
The upgrade will be straightforward enough. Double click the file you have downloaded and you should get a disc image. Open it and double click on the files inside. Keep your serial number handy, although I don't recall it being needed for a minor upgrade.
You may find that encoding is your biggest hurdle. Back in the day of v1.5 there were very few cheap options open to you. One was to use the Quicktime MPEG encoder, which was a system file you had to install into the QT folder in the system library. Since the system library can't be altered whilst the system is running (i.e. your mac is on) this was a bit of an issue - you either used the terminal app, or booted into target disc mode and used a second mac to put the file into the right location. Sheesh. Alternatively, you used an altogether better encoder - BitVice. These days you have many different options for encoding - try simply exporting from FCE as .mov and encoding in something else entirely. You need to end up with elementary streams -ideally a .M2V and .aiff (for audio). You should also have A.Pack installed on your hard drive. Use this to encode the audio to AC3 (Dolby Digital).
Then bring those assets in to DVDSP and author quickly. Use Apple+S frequently - like every time you make a change. Don't use the preview if you can avoid it, as it tended to crash out more often than not. Build the disc as a disc image and test it in DVDPlayer app.
Of course, for a relatively low cost you can now use DVDSP v3 or 4 (available on eBay most days, I think!) This uses a far more stable code base, a more graphical approach to authoring and has more bells and whistles (not that you'll need them all the time, if ever). It is based on DVD Maestro (PC App) and is very similar to use. Advantages are many and varied compared to V1 but there is a consequential hit on speed IMO. That said, if your mac is anything close to modern (I author mostly on an old G4 still) then you will be fine.

Are Compressor files compatible with DVD Studio Pro?

I am buying Final Cut Pro X and Compressor, but I am working on a school project that needs to be finished in DVD Studio Pro. Would the compressed files be compatible with DVD Studio Pro even though FCP7 and FCPX are not compatible?

Yes. Compressor 4 (or any version) will create the DVD-compliant files that are used in DVDSP.
Russ

Duplicating DVDs made with DVD Studio Pro 4.2.2

I cannot duplicate dvds made with DVD Studio Pro. I could with my prior version but since upgrading, I am unable to. The duplicator says: Source and target size mismatch - or something like that. I have seen only one other complaint about this and they said to burn the dvd to the hard disc and copy from there. This did not work. Same error message comes up on the duplicator. I can't burn all these dvds one at a time!!!!! Any solutions out there?

Welcome to the discussions.
It is also good to include as much information about what you are using to help others see if they can be of assistance. I know it can be frustrating trying to finish up and something goes wrong. Some days many people reply, other times, such as the problem I have with connecting to background process after the last quick update, hardly anyone replies. I hope that someone might be able to offer assistance.
You say you have 4.2.2, not 4.1.2? I have not seen that update, is it for an intel model? I am still using a Dual G4 1.42 with 4.1.2.
Which duplicator are you using? It would be good to include that so those using that brand/model can replay.
Is the DVD you recorded on and the ones used for duplications the same brand/size/type?
While I know this can take a while, in a pinch, such as not, just keep DVDSP fired up and feeding your DVD burner.
I only have to do 6 to 8 copies at a time so I use my DVD burner from DVDSP or save the DVD as a disk image using Toast Titanium 8 and opened it in toast to duplicate via the DVD burner.
Please reply with more information and hopefully others can offer more help.

Possible to set burn speed with DVD Studio Pro?

Is it possible to set or adjust the burn speed with DVD Studio Pro ver 3..?

Build in DVD Studio Pro, then burn in Toast. Toast will let you adjust the burn speed.

"Incompatible format" with DVD Studio Pro

I'm trying to put together a DVD with DVD Studio Pro. When I transfer the movie into the "track 1" area in DVD Studio it says "Incompatible format". I've tried going under "preferences", then under the "project" tab and selecting both HD DVD and SD DVD but neither setting makes a difference, it still will not accept the clip. I've gone into the "General" tab under preferences and tried setting the resolution to the same as the movie file and still nothing. Does anybody have any suggestions as to what might be going wrong?
Just to let you know as well, I have a smaller file that I've tried inserting into DVD Studio and it seems to work fine. Both this smaller file(891MB) and the actual movie that I'm trying to add(22.1GB) have the exact same attributes when checked in QuickTime using "command + i"
Here's the info for the movie file I'm trying to add:
Self contained QuickTime file from Final Cut that is about 2 hours long.
Apple HDV 1080i60, 1440 x 1080 (1888 x 1062), Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
Normal Size:1920x1080 Current Size:1920x1080 (actual)
Here's the info for the small video that works:
Self contained QuickTime file from Final Cut that is about 4 minutes and 39 seconds long
Apple HDV 1080i60, 1440 x 1080 (1888 x 1062), Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
Normal Size:1920x1080 Current Size:1920x1080 (actual)
Any help is appreciated!

Your best bet is to encode the video outside of DVD SP to an m2v stream. Are you making a SD DVD or HD DVD?

Is Compressor compatible with DVD Studio Pro?

I am buying Final Cut Pro X and Compressor, but I am working on a school project that needs to be finished in DVD Studio Pro. Would the compressed files be compatible with DVD Studio Pro even though FCP7 and FCPX are not compatible?

Thanks so much. I've been sort of panicking here and Google has not been my friend.

How do I create Blu Ray Disc with DVD Studio Pro ?

Similar Messages

Maybe you are looking for