How do I create graph showing savings over time?

Hey there, I'm trying to create a graph showing savings over time. I only have data for random months (they aren't spread apart evenly) So this chart isn't showing an accurate slope of savings over time. I tried entering months in between the months I have recorded and just leaving the savings amount blank but that deletes the curved slope on the graph. Is there a way and can show only these 7 recorded numbers but have them spread out on the graph to reflect the accurate time?
Thanks,
Caleb

The only way I can see of "stretching" the x-axis into a regular timeline would be to add extra rows for some of the intervening dates and then averaging the both the dates and the amounts from the row above and the row below:
You can then hide the rows that contain the averaged amounts.
When you create the chart you'll need to tick the "Hidden data" button under Chart Options:
After you've created the chart, you can edit the dates on the x-axis to remove any unwanted labels.
Hope this helps.
H

Similar Messages

How do i get iPhoto to time phase? (meaning take the same pic pose and show it over time)

how do i get iPhoto to time phase? (meaning take the same pic pose and show it over time)

I'm not sure that this is something that iPhoto does. However, neither is it something I quite understand. What do you mean by "pic pose"?
Regards
TD

How i can create multiple users at a time (User Administration) in EP

Hi
I need to create multiple users at a time. How can i do that through User Administration in EP.
Please also tell me about import option in User Administration

Hi,
1. First of all create a master user based on which you can create multiple users.
2. when you are done with it export (by selecting the option at user creation) it.
3. you can see some text in a window copy it create a txt file with it, and add as many users as you want
by cpoy pasting the text multiple times and making necessary change as per the names etc...
4. save the txt file.
5. goto import option you were talking about and import the text file and update it.
6. As it gets updated you are done with the creation of multiples users.
If you get stuck somewhere feel free to let me know.
if this answer satisfies your need, award points and close the thread.
Edited by: ali alia on Feb 10, 2009 6:21 AM

How do I make an XY-Graph plot points over time?

I am building a program to plot and take data of a relationship between two voltages. One is voltage is uniquely dependent on the other. So far I have successfully built an XY-Graph to plot the voltages against each other (Voltage1 along the x-axis and Voltage2 along the y-axis). However, the XY-Graph only diplays the point (V1, V2) at the instantaneous time I am looking at it, and does not continuously plot different points as I vary the independent voltage. I need the graph to display all the points that occur as I vary the independent voltage. As of right now, all I see is one little cursor that moves all over the graph as I vary it. My program consists of a While Loop that contains all of the following: two seperate data anolog input functions that take both voltage separately from my board. The the output samples from each 'AI Sample' function are then bundled into one cluster using the 'bundle' function. The cluster output from the 'bundle' function is then wired to a 'build array' function. The 1-D array output from the 'build array' function is then wired to my 'XY-Graph'. How do I get the XY-Graph to plot a point every millisecond or so?

Bundling and then using the Build Array is not correct. Yuo can see the correct method in the help for an XY Graph below. In order to use the normal XY Grpah, you would have two shif registers. One for the X array and one for the Y. Bundle the two arrays and then wire to the graph.
The other way is to use the Express XY Graph. With that, you can just wire your scalars to the X and Y inputs and set the Reset input to false.
Message Edited by Dennis Knutson on 11-12-2007 06:32 PM
Attachments:
XY Graph 1.PNG ‏21 KB
XY Graph 2.PNG ‏6 KB

How do I create a shared calendar over multiple phones

I wanted to create a shared calendar for my wife's and my iPhone. That way we can sync work events. Anyway I can do this with iCal or do I need to find a different app?

Hey scwalters101,
You can create a shared calendar and use the iPhone's Calendar application for viewing, creating and changing it. In order to do so you also need a calendaring service. Many are available, including Apple's iCloud. See this page for information about iCloud calendars -
iCloud: Calendar overview
This article explains how to manage your iCloud calendar with the Calendar application -
iCloud: Using iCloud Calendars with Calendar and iCal - Apple Support
And this article gives an idea of the other features of iCloud -
iCloud: What is iCloud?
Thanks for using Apple Support Communities.
Be well,
Brett L

WiFi network security: How do I create a hidden SSID using Time Capsule?

Hello. I'm having a security issue on my wireless network. I recently noticed (via a Finder window under "Shared" on the left side of the window) someone squatting on our wifi network which is WPA encrypted and is based on a Time Capsule plus 2 Airport Express boxes for streaming music. I have an external network drive connected to the Time Capsule which houses all my iTunes music and movies. I have a feeling they are breaking in to steal from that rather than merely using our internet connection. I immediately changed the password. The next day I found them on our network again. I changed the password again. Immediately after changing the password and refreshing the Finder window, they showed up on our network yet again. I then changed the name of our SSID/wifi network and the password for a 3rd time. So far they haven't showed up and I'd like to keep it that way. We live in an apartment building and I fear that they won't see our old network name in the lists of networks and will realize that the new network name is us and then they will break in yet again.
1. is there anything else I can do to stop them?
2. is it a good idea/solution to hide our SSID and if so, how do I do that on the Time Capsule?
I can't seem to find any info on creating a hidden SSID on the discussion boards so any help is appreciated. Thank you!

If you have other devices on your network and have enabled file sharing on them, you will see an occasional device or two come and go. That is normal. Usually, you'll see something with some numbers. That's usually the last 6 digits of the MAC address of a device.
Any hacker who is smart enough to crack your network is not going to allow his identity or any trace of his computer to be displayed on your network.
If you are still convinced that someone is cracking your network, you can enable the "closed" network option, but there are plenty of free utilities on the Internet available that will reveal a "closed" network in seconds. Most 12 year old kids looking for free wireless know how to do this.
If you want to do this anyway, here is how:
Open AirPort Utility - click Manual Setup
Click the Wireless tab below the icons
Click the Wireless Options button
Enter a check mark next to "Create a closed network"
Click Done, then click Update and wait for the Time Capsule to restart
Message was edited by: Bob Timmons

How can I create a new worksheet every time that one cell it´s filled

I was looking in the references formulas and I find the formula "Direcction".
My goal it´s to create a new worksheet everytime that some cells are filled.
So I need one formula that alows me to put this reference and open automaticaly a new worksheet and this new table inside of this worksheet.
It is clair the question?
Someone can help me wiht that?

Hi Wayne, Not really, the smaller table it´s not really important, I was trying to do the new sheet with it in that case.
What I want is to use the dates in the row with the items markeds to create a new worksheet.
I made an example donw here.
I have the first table, than from it, I want to do 4 new tables
I mean, everytime that I finish with one column I want to have a new table (in a new work sheet) with that items markeds.
Do you think that script it´s possible to solve this?
How can I do it?

How to plot bar graph in the real time?

Hi guys
I have n row and 3 column array, n will vary according the time, for example t=10ms, n=1;t=20ms, n=2;..., I would like to display all the data of the array in the bar graph in real time. I tryied with example "array to bar graph demo.vi" but very time, only one row was displayed.
Could anybody help me?
Many thanks.
Sorry I don't know how to capture the picture from VI, so I pasted it diagram to word document.
Attachments:
question.doc ‏240 KB

Where did you get this example. I can't find it listed in the current shipping examples.
Also, posting a small image of a section of a block diagram is not much to work with. You are using local variables and a sequence structure. Neither one is a good sign. If you would simply post the actual VI (and any subVIs), it would be much easier to see what you mean.

How do I create a list of available times?

I frequently receive emails asking me when I'm free for a meeting. I'd like to reply with a list of available times between specified dates. How do I do this with existing Mac software or commercial products? I've seen such listings from Outlook.
Desired output:
This Thursday I'm free:
8:00 am - 9:00 am
2:00 pm - 3:30 pm

Alex573 wrote:
... I need to create a list ... , where I can add each item to the list individually, automatically, and without there being transitions for the entire list each time I add something to the list.
that needs in a simple 12€ consumer-app some craftsmanship ...
(and no, no automatics)
• create your list in Keynote (or any other text or paint app ... or ppt ....)
• save it as a jpeg
• erase one 'line'
• save it again
• repeat steps until one line left
=> you get a couple of stills
iM would allow to add those to your project; add a simple transition => lines 'appear'
if you need the text overlaid to a video, use the the well-known 'transparent png' trick (then, the new line has to appear with a hard cut.
to inspire you, read my (old) advice - it's shown with iMHD6, but the 'mechanics' is same.
https://sites.google.com/site/karstenschluter/accents
my website explains the png-trick too (does work in vers11) ...
https://sites.google.com/site/karstenschluter/imovie09tricks
maybe, you get inspired by the subpage about 'using Keynote for a vid-cast production'
https://sites.google.com/site/karstenschluter/how-to-make-a-vidcast/keynote

Newbie asks: how do I create a song with mixed time signatures?

I need to use some sort of app (GarageBand 2.x or 3.x) or something more beefy if need be, in order to create some songs that have mixed meters (i.e. a couple of bars of 4/4, then a bar of 2/4, then some more 4/4, then some more 2/4.
What have others done to achieve this?

You can use volume automation on your output track.
1) Open the mixer and click on the button just above the pan knob on the Output strip. Select "Latch."
2) As soon as you do this, the Output track will appear in the arrange window below your other tracks.
3) Press "A" to show automation on your tracks.
4) Press on the long gray bar beneath the Output track name and select "Volume."
5) Click anywhere on the yellow automation line to create two nodes and drag the last one down for your fade.
That should do it.

How to trace pl/sql code version over time

Hi,
As there are many pl/sql developers in the office I work in, we're thinking about how to mantain the old versions of pl/sql code and, above all, to forbid two different programmes to work on the same code at the same time.
I've been told we could use Subversion (http://subversion.apache.org/) also for pl/sql
What do you generally use for this target? Do you use Subversion or what else?
Thanks in advance!

Mark1970 wrote:
As there are many pl/sql developers in the office I work in, we're thinking about how to mantain the old versions of pl/sql code and, above all, to forbid two different programmes to work on the same code at the same time.
I've been told we could use Subversion (http://subversion.apache.org/) also for pl/sql
What do you generally use for this target? Do you use Subversion or what else?We use Subversion and have been for many years (used CVS prior to that).
PL/SQL code is no different than Java code, C/C++ code, or any other code. So why should using a version control system like Subversion be used any differently (or not work correctly) for PL/SQL code?

How can I make apps show up multiple times on the iphone?

Hi, call me pedantic if you will, but I want some of my iphone apps to show up in several locations so I can sort out the folders.
For example, I have loads of games. I want to categorize them as sports games, puzzle games, racing games, etc.. but I also want a folder called favourite games. I want any games in the favourite games folder to show up in the correct category folder as well.
I know that we probably can't do that with a normal iphone but if I was to jailbreak, could I do it?

Do you go around chastising others for providing answers to other people's questions just because you don't seem to find the answer helpful? Isn't it really up to the original poster to decide what is helpful and what is not?
Could I respectfully request that it would be more effective if you either provided an answer to the original question, if you know it, and if not just avoid posting solely to criticize someone who has been helping here for many, many thousands of posts (and been acknowledged for doing so by hundreds of users who have been helped)? Otherwise it really is you that's wasting time and bandwidth.
Regards.

Anyone aware of UML290 software that will graph RSSI/SINR over time?

I can get a graph like this from a Cradlepoint router with a UML290 plugged in, anyone aware of any windows software that will do the same when the modem is plugged into a PC?
My signal has become very erratic, so much so the router can't connect with the modem but the connection works OK with the modem in a PC. I want to collect some stats to share with my VZW friends.
https://docs.google.com/open?id=0B116FHeys179cEstdGxNb2VXVGchttp://

If you don't mind Photoshop Elements, here are Adobe's Vista notes.
Photoshop Elements compatibility with Windows Vista
Photoshop CS6 is the current product, and here are the notes on Vista support.
Adobe CS6 Complete System Requirements for All Products on PC and Mac | ProDesignTools
Gene

How can mass creating production orders???

In SAP ,we can use CO01,CO09,CO07 to create production order. But by these TOCDES,we only can create one production order for one finished product once a time.
But we now need to create more then one ,may be more then 50 production orders once a time?
It is possible in SAP?
I know we could conver the production orders from plan orders after MRP run.But sometimes
for some reasons we must create produciton orders manually.And I also know in SAP some TCODE can process many production orders once a time ,like COHV,CORM, can release ,TECO many production orders once a time.
But how can mass creating production orders once a time，not by mrp run?
How can batch create produciton orders in SAP?
Thanks for any reply!

Hi,
Use the BAPI - BAPI_PRODORD_CREATE or for internal orders BAPI_INTERNALORDER_CREATE
Take the help of your abaper, he / she can use the above BAPI to write a custom program to mass create production order.
Hope the above helps.
Regards,
Vivek
Added
You can also use the below BAPI's in your custom program:
BAPI_PRODORD_RELEASE to release the orders
BAPI_PRODORD_CHECK_MAT_AVAIL for carrying out material availability
Edited by: Vivek on Mar 22, 2009 8:27 PM

How to create graphs on JSP page in JDeveloper 10.1.3

Hi all,
Is there an easy way to create graph objects with JDeveloper 10.1.3? I have taken a look to some tutorials, but it looks like they all use the "drag/drop graph from the data control palette" method.
E.g. I got example 88 to work from http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html, but I have no idea how to get the BIGraphDef1.xml object and how to link it to a set of data.
Are there some tutorials to show how graphs can be used in JDev 10.1.3?

Frank,
This is what I did to implement the graphic manual, but I think, I forgot something...
1. create a new application with projects DataModel and UserInterface
2. in the DataModel I created a similar master/detail view as the one of Steve, this is named:
TestModuleDataControl
\--DepView
__\--Deptno
__\--Dname
__\--Loc
__\--EmpView1
____\--Sal
3. I created a new jspx page and added a graph tag:
<f:verbatim>
<graph:Graph data="${bindings.DepartmentsEmployeesInDepartmentGraph}"
imageHeight="200" imageWidth="400"/>
</f:verbatim>
4. in the page definitions I added
<graph id="DepartmentsEmployeesInDepartmentGraph"
IterBinding="EmployeesInDepartmentIterator"
ControlClass="oracle.dss.graph.Graph"
SeriesLabel="Ename"
GraphPropertiesFileName="userinterface.BIGrap1hDef1"
SeriesType="SINGLE_SERIES">
<AttrNames>
<Item Value="Sal"/>
</AttrNames>
</graph>
5. I added also the iterator:
<iterator id="EmployeesInDepartmentIterator" Binds="EmpView1" RangeSize="10"
DataControl="TestModuleDataControl"/>
6. I copy/pasted the BIGraphDef1.xml from Steve's project into 'Application Sources'\userinterface.
7. in the web.xml file in WEB-INF I added:
<servlet>
<servlet-name>GraphGeneratorServlet</servlet-name>
<servlet-class>oracle.jbo.html.jsp.graph.GraphGeneratorServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>GraphGeneratorServlet</servlet-name>
<url-pattern>/GraphGeneratorServlet</url-pattern>
</servlet-mapping>
8. when I run the page, I can't see the graph and there are also no errors. I think I mis a global setting somewhere...
Is there anything I forgot to do?
note: if I add a new jsp page into steve's application, I do can see the graph if I perform the steps mentioned above...
I just found out that, If I create the graph on a page which is in the root directory, then it works. If I put it in a subdirectory, it doesn't:
- create graph as mentioned above on a page: web content/myGraph.jspx --> works
- create graph as mentioned above on a page: web content/app/myGraph.jspx --> doesn't work...
Does somebody know where to put a setting/parameter to get the Graph visible in the subdirectory app?

How do I create graph showing savings over time?

Similar Messages

Maybe you are looking for