How do I create one page per spread?

I want to create a digital booklet that is only one page per spread. Right now I have a spread with two pages, one is filled and the other is blank. How do I delete the blank page w/o moving the next page after the blank into its place? Your help is appreciated, thanks!

Just uncheck Facing Pages from New Document settings window while you create your document, or do it later from File > Document Setup.
You have to remove your empty pages manually after that. One easy way to do that is use Pages panel (Window>Pages), just activate thumbnails of empty pages by clicking them control button pushed down (in mac it´s command). After you have activated all your empty page thumbnails, just hit small carbage can icon at the bottom of pages panel...
Or use Layout > Pages > Delete Pages tool, where you can give page numbers of all the pages you want to delete.

Similar Messages

If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?

If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?

If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?

I have two pdf docs that I used Acrobat to convert to word docs. How do I extract one page from one doc to insert into the other doc?

I have two pdf docs that I converted to Word Docs using Acrobat Pro. How do I extract one page from the first doc and insert it into the second doc? When I "select all" it grabs the entire document. I need to take pages out, put other pages in, and edit some of the text.

HI djlarp,
Try triple-clicking in the text that you want to select--it can sometimes be tricky to select text in a converted document. If that doesn't work, it could be that the PDF document was created from a scanned document, and OCR wasn't enabled when you converted the document. (However, OCR is enabled by default when you convert via the ExportPDF website.)
If you're unable to select text by triple-clicking, let us know. I would be happy to take a closer look at your files.
Best,
Sara

Can/How can I create a page with all my blog pages RSS??

Hello all.
I have a website containing many seperate Blog pages according to their topics like News, Tech and Scifi.
Is it possible to create a new page, that will contain the latest entries of all these blog pages a one "consolidated" page, maybe perhaps of RSS feed?
Thanks and cheers

Apple states
How can I create a page that aggregates my podcasts?
If you have multiple podcasts listed in the iTunes Store, the iTunes staff can create a single page that lists all of them in one place. We call this page an “artist page.” Note that a podcast can only appear on one artist page.
To request an artist page, navigate to one of your podcasts, click on Report a Concern, and select Remove a Podcast. In the dialog box, explain that you would like an artist page, give us the exact name of the artist (please don’t include “Inc,” “LLC,” etc.), and list the exact feed URLs or links to your podcasts.
at the bottom of this page
http://www.apple.com/itunes/podcasts/creatorfaq.html
I hope two is enough and if not that someone contacts me and maybe even changes the info on the above link.
Thank you for your input!

What is a Token Data String and how do I create one?

How do I create local server scripts? I have read Chapter 2, what is a data string, how do I 'create' one and how can I 'pass' this off Apple, iTunes, whoever needs it? Chapter 2 doesn't say.
Gateway Windows XP Pro Military

I suggest that you grab a copy of Chapter 4 of the Admin document. It explains a lot. You should also grab a copy of Apple's sample scripts (you get some C code, Java, Perl, Python, and a shell script). They will give you some idea of how this works. The scripts are downloadable frmo the iTunes U support page.
Basically, the token string contains a credential that says what access you'd like to have in iTunes U (you are an "Admin" user or a "Student" or an "Instructor" say). The credential encodes what you can view/edit in a standard way. The credential also includes some optional info (like your identity, e-mail address ... a "user identifier" which is typically a number ... say if you identify users by numbers and names ... and other stuff). You then slap on a timestamp on the credential and cryptographically encode it with that shared secret Apple sent you (when I say "you," I mean that funky CGI you've written ... your CGI does all the encoding). When you're done with the token string, you slap it on the end of a site URL (again, this is something Apple sent you) and send it to Apple. This way, you ('er, your CGI) does all the authentication for Apple (because you know how to authenticate your users better than Apple ever will).
I confess I had to read Apple's documents, oh, like twenty times before I figured all this stuff out. Once you get it though, it will seem like a pretty cool system.
MacBook Pro Mac OS X (10.4.8) I lied. I'm running Leopard

Amazon print guidelines specify one page per sheet

Amazon print guidelines specify one page per sheet
I am setting up a new book and not sure I understand Amazon guidlines "one page per sheet".
I am pretty sure this setup is one page per sheet when Exported to PDF -- can any one please confirm this?

Thanks, you mean be sure "Spreads" is unchecked as in this screenshot (I don't know what I am doing here)...?

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

HT1386 How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?

How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?

Yes, I do have multiple devices and it appeared to me that every time I tried to sync or log onto iTunes, the password was incorrect. Consequently, I was and am constantly changing it. Wouldn't it be nice if Apple would simply say that you only need one Apple ID and one password regardless of the number of Apple devices you intend to sync via iTunes.
Barring the above, how about a way to merge all of the Apple IDs and passwords into one.

How can I remove one page from adobe file

How can I remove one page from adobe file, when I try to remove the page a dialgue box say "some pages are being used, so they can not be ereased"?

Tools>Pages>Delete pages

How do i create one source file that feeds two users on the same pro book?

how do i create one source file/folder of photos that feeds two users on the same pro book?

Well you can do exactly the same with a folder of photos, just put in the Users/Shared folder.
Iphoto is a mite more complex than this. It's a database and so there's a bit more involved.
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

RE: How can I create a page break in a file?

Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

How can I create a page break in a file?

Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the following
two methods, but neither of them works. Specifically, it seems a special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);
-----------------------------------

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

How do I create sub-pages in iWeb?

Hi, How do I create sub-pages in iweb like it does in this website
http://www.e-alliance.ch/index.php?id=405
with all the main menus "about us", "advocacy capacity", etc?
Thank you for your help!!!
Boaz

To create sub pages, just ensure that the main menu item is in the main menu and then for the sub pages themselves, ensure that they are NOT in the main menu and you link back by creating links instead.
For example, you could use Staff as a main menu item, so Staff would be in the main menu and then descriptions of different staff members would be underneath, but not in the main menu - they would have separate links that you create and then hyperlink.
If you want to make drop down menus in iWeb, as in the site that you linked to, you can't do this directly in iWeb itself. You have to make it and then upload various css files to your web host and link to it in iWeb etc. It is quite a complex task to create drop down menus in iWeb. If you want to do that, then I would suggest that you use a different app instead - take a look at http://www.everwebapp.com.

How do i create a page template in order to spawn new pages?

How do i create a page template in order to spawn new pages?

Where did you find the link/interface that led you to ask your question here?
You should find the forum for whatever product your question involves and post there.
Here is a link to a page that has links to all Adobe forums...
Forum links page:
http://forums.adobe.com/index.jspa

Does anyone know how I can create "facing pages" in new Pages? I could do it in Pages 09, but can't find the option in new Pages.

Does anyone know how I can create "facing pages" in new Pages? I could do it in Pages 09 but can't find the option in new Pages. I have documents created in Pages 09 and want to do some further work on them, but am now using new pages.

There were 100+ features that didn't make it into the "new & improved, rewritten from the ground up” Pages 5. Some have returned with the updates & there are some new features that are worthwhile, but there are still 90+ features missing. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

How do I create one page per spread?

Similar Messages

Maybe you are looking for