How do I customize cover page settings in a document?

I have a 20 page document I am working on but I want to know how to customize the settings for the cover page totally different from the rest of the other pages?  I want the margins to be different from the other pages, I don't wnat headers or footers, etc.  Please help.

The actual margins are fixed for the entire document but you can work inside those with margin insets.
You can make the first page a section on its own or use:
Inspector > Layout > Section > Configuration > Fisrt page is different
Headers and Footers are set for the entire document, but they can be empty on the first page of a section or in selected sections, where you want them to not show.
Peter

Similar Messages

  • How to add a Cover Page to an existing document

    I have a Pages document created with a Word Processing template and with Facing Pages, page 1 beginning with the right page. All of the following Section breaks will begin with the right page as in a book. The space shown to the left of page 1 currently is a blank, grey area. I would like to use this space as a cover page.
    If I insert either a page break or section break at the top of page 1, it pushes page 1 down and to the left. That is not what I want. I would simply like to add the "cover" page to the left of page 1 (and continue to begin later sections/chapters at the right.
    Is that possible, and if so, how do I do it?

    PeterBreis0807 wrote:
    Odd pages are always to the right of Facing Pages in the layout.
    A cover page should also be on the right and if need be, followed by a blank page, which you can do with a Page Break.
    Hello again Peter, thanks for the advice.
    What I actually did was insert the cursor at the beginning of page 1, and in the Menu, I did an Insert > Choose... and selected a one-page cover document. With a bit of trial and error, I was able to get the artwork to completely cover the page. However, the cover is now labeled as page 1 and I would prefer it and the following blank page to not be page numbered. I consider this as a temporary work-around so I could export to a pdf file.
    Now, what I would like to do further is add a new chapter to the end of the file. In the Insert > Sections menu, I have previously created a “Chapter” Section but after adding it to the end of my document and changing the Header to read Chapter 2, it also changed all of the previous headers on the right facing pages. Not good :-(
    Ralph

  • How can I remove a page from a PDF document and save it as a new PDF document?

    How can I remove a page from a PDF document and save it as a new PDF document?

    Tools - Pages - Extract and tick the option to delete the extracted page from the original file.

  • How to Insert a Landscape Page Into a Portrait Document?

    How to Insert a Landscape Page Into a Portrait Document?
    i use pages 5.2
    thanks

    You can't.  But you could add a text box and rotate it (select the box, click arrange, rotate).

  • How do I copy a page from one pdf  document to another?

    I am a newbe!

    That was easy.Thank you.
         Re: How do I copy a page from one pdf document to another?
    created by George Johnson in Creating, Editing & Exporting PDFs - View the full discussion
    If you open both documents, you can drag a page from the Pages panel (on the left of the window) of one document and drop it into the Pages panel of another.
    You can also extract one or more pages from a document to create a new document, and then insert the pages from this new document into another. In Acrobat 11 you 'd do this by doing:
    Tools > Pages > Extract
    and then:
    Tools > Pages > Insert from File
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6163925#6163925
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6163925#6163925
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6163925#6163925. In the Actions box on the right, click the Stop Email Notifications link .
    Start a new discussion in Creating, Editing & Exporting PDFs at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 .

  • Using Java 5, how to develop customizable web-pages  like iGoogle ?

    Is it possible to develop customizable web-pages like iGoogle does, using Java 5 ( simply using JSPs, servlets, JSFs, AJAX etc. and without using portals) ?
    A simple example explaining how to provide 3-4 header graphics options ( like igoogle does) will be helpful. (iGoogle seems to create a cookie, which appears to be used to render the selected header-graphics).
    TIA
    Edited by: DevelopingJava2005 on Jul 7, 2008 9:36 AM

    Without using portals?
    Google uses RSS feeds to compile their mashups on iGoogle. The positioning of those boxes are managed with AJAX and upon placement are saved into a session so they stay there for each visit after.
    Please be a little more clear as to what you are looking for. Yes, it is possible to develop web pages using the technologies you specified to simulate something like iGoogle, so give us some more details on what exactly you're looking for.
    Code wouldn't hurt either.

  • How to hide the cover page when printing ?

    Dear all,
    I would like to change printings option for the report S_ALR_87013611.
    I would like to hide the cover page (with parameter) when printing.
    How can I do that ?
    Thanks for your help
    Best regards

    Hi,
    Do you mean the part of the report, which contains the report name, selection date, controlling area,
    Fiscal year, and other selection data?
    If yes, then you could proceed as follows: As the 1SIP-001 (S_ALR_87013611) is a standard report, please copy this report with name in the customer naming range and then delete the title page from the copied report as follows:
    1.  Call GRR2, in the library 1VK place the cursor on report 1SIP-001 and click on the icon 'Copy'
    2.  In the 'To report' field enter (for example) ZSIP-001 and press  'Enter'
    3.  Now double-click on ZSIP-001 to enter the report definition.
    4.  Under 'Extras' -> 'Report texts' -> 'Title page' call the title page.
    5.  Choose 'Text' -> 'Delete' and the title page lines are removed.
    6.  Click on the 'Save' icon to save this.
    7.  Assign the report to a new report group by choosing 'Environment'
       -> 'Assign report group' from the menu and enter ZSIP in the popup,
       confirming the next popup that the report group should be created.
    Now call txn GR55 and execute report group ZSIP with your selection
    criteria and follow the steps to print the report:
    - click 'printer icon' - mouseover text 'Print (ctrl+P)'
    - click OK with dot in 'current report'
    - click OK with dot in 'Print formatted report (page length 59)
    - on print parameter screen in menu, blank the 'SAP cover page' field.
    Regards,
    Greta

  • How to create multiple cover pages following the text

    Hello everyone,
    I have a such difficult problem on pages : I would like to create multiple cover pages, and I want these pages to follow the text. I will to explain this a little better.
    I have to write a really long report. I need to divide it in some "sections" (I'm not sure that's the same meaning that in the software) and each section would start by a kind of cover page with a fullpage photo and a title in textbox. Let's see it with a capture :
    My problem is that I would like this page to follow the text. Because on the previous page, I have a table of contents which is evolving and taking more and pages each time. And the problem is that my "cover page" isnot moving to stay after the table of contents, it's the table which is continuing after it. So I have a first part before the cover page and a second part after the cover page. I would like all the text to stay before.
    Thank you in advance for any replies
    Evan Peuvergne, Hetic

    Use anchored images at the beginning of each section.
    You will need to initially make it smaller so you can position the image and the TextBox (make this second so it is higher in the stack) set a page break, then enlarge the image and Textbox to suit.
    If they are anchored (Move with Text) they will maintain ther position in the document.
    Turn off Text wrap on both your image and the Title. Insert a Page Break after the Title Textbox anchor on the page to move the following text to the next page of the section.
    Peter

  • How do I change the default settings for opening documents on my macbook?

    Hi I would like to know how to change the default settings for opening documents on my macbook. Everytime I try to open a doc. it automatically opens with Textedit, instead of Pages or another program.

    Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
    You can only assign one default application to one type of document.

  • How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

    My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
    I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
    When I clicked the Save button it showed the page that I scanned and showed 1/1.  On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
    Not to mention HP's Customer Support is useless!
    I'd appreciate any help I can get with this problem.
    Thanks,
    Mark

    Hi BH,
    I see your diagram.  I just scanned something.  The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram.  The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram.  I can't see the plus sign because it is not there.
    I tried re-installing the software and drivers as you suggested but that did not have any affect.
    Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
    I've noticed that on HP's support forum web page there is only 1 solved request for assistance.  That doesn't give me much confidence in HP.
    Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
    If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
    Thanks,
    Mark  

  • How do I insert additional pages inside a footnoted document with accompanying text boxes and still keep pages below syncronized?

    Is there a way to insert additional pages into a lengthy document containing continuous footnotes at the bottom of each page and accompanying text boxes on most pages without losing the syncronization of text and text box information on the pages below?

    Footnotes do not work for text in textboxes, and you can keep on adding text after existing text so I am not sure what you are asking for.
    Peter

  • How Do I Keep Cover Page Blank?

    I'm running an old version (4.0.3) of Iphoto. I am trying to make a simple book - but do NOT want a picture or text on the cover. I can't seem to get this done. Any suggestions?
    IBook G4   Mac OS X (10.4.8)  

    Can you provide more information. Switching from page to page in what app? How if the format changing?

  • How can I customize Tile Page (what's this page) to cycle on a folder?

    I love how the Tile Page ("what's this page") feature looks. But I rarely use it because it auto-populates with URLs (most visited or recent) I already have sorted in my bookmarks under folders and in the Bookmark Toolbar. I don't need a screen shot of the gmail login screen.
    What I really need, and what this feature would be brilliant for, is to cycle through the heaps and mounds of random URLs I have in my Unsorted Bookmarks folder. I just timed it and it takes me 18 seconds to scroll from top to bottom.
    I would like to have this folder of Unsorted Bookmarks populate the Tile Page, [1][2] so I can sort through them visually.
    [1]: Even better would be a text field on this page where I could enter keywords!
    [2]: Even better still, to have this page split between web page screen shots and pills of my favorite and most recent keywords which I can click on to filter this auto population.)

    Probably better trying posting to
    *https://www.mozilla.org/about/forums/#wishlist
    Also note
    * You are able to pin tiles of your choice, or otherwise customise the newtab page <br /> [[New Tab Page – show, hide and customize top sites]]
    * You could add more bookmarks folders or nested folders if it makes your book marks more manageable. <br />[[Use bookmark folders to organize your bookmarks]]
    * Or tag them [[Bookmark Tags - Categorize bookmarks to make them easy to find]]
    *Or if you like tiles and thumbnails [[Use Tab Groups to organize a lot of tabs]]

  • How do I customize auto page numbers?

    My professor requires that we number our pages like this: "Last name #"
    But I can't figure out how to customize it to include my last name.

    In the Header field or another repeating object or field, type "LastName ", then choose Insert > Page Number.
    Jerry

  • How can I customize a Pages template to include a photo frame and text area?

    I am putting together a reference notebook for volunteers at our local zoo.
    I am attempting to format every info sheet the same. Each page will include a photo of the featured creature along with text including description, feeding habits, range etc.
    The only program I have to publish with is Pages. I've tried to put in a "photo box" so that each photo is the same size and in the same location on the page etc. I just can't seem to find all the tools I need to do this.
    I'd appreciate some guidance. Thanks so much.

    You need to create your own default template. Open the blank template & insert a photo, any photo. Now select the photo & resize it using the metrics inspector. Now, with photo selected, go to Format > Advanced & select Define as Media Placeholder. Then again go to Format > Advanced & select define as default image style. While you're at it set the amount of extra space in the wrap inspector, etc. You can do similar settings with text boxes, tables, shapes, etc.
    I suggest downloading the Pages User Guide from the Help menu & reading more about placeholders & about capturing pages (sorry, it's not something I can remember doing).

Maybe you are looking for