How do I customize my Discussions iViews?

Hi all,
I am using EP6.0 SP2 Patch2 HotFix2.
I want to customize my KM Discussions iViews.
In every such iView, there is a heading "Discussion" at the top and a short description of the discussion below that. This is standard for any Discussions iView and can be switched off from iView Property Editor so that both the heading and description don't appear.
I want to customize both the heading as well as the description for all such iViews. In case a discussion iView has been created to discuss about a KM resource, say a file giving demographic statistics of a country, then the discussion should be aptly titled "Country XXXXXXXXX: Population Statistics and its Impact" and maybe a short description prepared by me could go below that.
I couldn't find anything about this.
Anybody got any ideas on this one?
Thanks and Regards,
Sagar Kirtany

hi,
have a look here:
https://media.sdn.sap.com/html/submitted_docs/nw_kmc/introduction/km/ui/Flexible%20UI.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/knowledge management and collaboration developers guide.html
http://www.jivesoftware.com/downloads.jsp
regards,
ds

Similar Messages

  • How can you custom KM Discussion iView

    How can you custom KM Discussion iView?
    Please send samples.
    Thank you,

    Hi,
    Here you have some useful links, but take into account that in the last patch SAP introduce a new forum similar to use in SDN.
    Also, try to be more clear about your requirements. What do you need to configure ?
    Configuring Discussion Groups
    http://help.sap.com/saphelp_nw2004s/helpdata/en/01/ed0f412d72f323e10000000a155106/frameset.htm
    Editing Discussion Names and Descriptions
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/ea4f16b2c04fcce10000000a422035/frameset.htm
    Configuring Discussions for Documents and Folders
    http://help.sap.com/saphelp_nw2004s/helpdata/en/00/e7d78125e60d4a8f584f58a939f73d/frameset.htm
    Patricio.

  • How to use the km Discussion iViews in the enterprise portal

    hi ,
    i need to create a discussion forum in the EP.
    i want to make a KM discussion iview and then to customize it so that the look and feel is also changed.
    i am not getting how should i start?Is PDK development needed for this?
    please help.

    Hello Saurabh,
    For the cretaion of discussion forum kindly access my Article that i have published in SDN the link of it is .
    [Creation of Discussion Forum.|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20562528-a246-2b10-2988-f9b554a925ce]
    Here u will get Step by Step Solution for creation of Discussion forum.
    Now to change look and feel of ur Forum or say discaussion Iview Template u have to open template Par File in NWDS and can play with it (Codeing) to get desired output.
    I will sugest u to not to go with Discusasion Forum if u r haveing EP Ver7.0 then u can go for Installation of Forums on ur Portal.
    If want any other information i will be glad to help u .
    Hope this help's
    Regards.
    Soni Vinit

  • KM discussion iview customization

    Hi All,
    I am trying to customize the default KM Discussion iView. I was not able to figure out a way to remove the buttons "New Discussion Topic", "Delete All Topics". How to achieve this?
    Thanks in advance.
    Points will be awarded for helpful answers.
    Regards,
    Yoga

    Hi Yogalakshmi
    As Jon has mentioned you can modify the Commandgroup/or create your own command group
    First you create a custom Layoutset
    Duplicate DiscussionGroups  Layoutset
    Then Duplicate DiscussionGroupCollectionCommandGroup
    From the List of coomands, remove those you don't want.
    Also duplicate the collection renderer which refers to the "DiscussionGroupCollectionCommandGroup" and refer your Command group in the collection renderer
    Hope this will help you
    Revert if you have more queries
    Best Regards
    Aparnna

  • How can i change the Layout of the standard Discussion iVIew

    Hello all,
                 Most of my questions still remain unanswered.But this time i hope i will get some satisfactory reply. I want to create a Discussion iView(not Discussion group or Admin Discussion Group iViews) . However i am not getting the layout used here.I want to remove buttons like "Add To Favourites" Subscribe TO Discussion" and also ,once you click on any topic ,on the second screen commands like "Send To","Subscribe" etc .I want this to look simple as per requirement.How is that possible? Where exactly can i find them ? If there is any xml file ,where to find the XML file ?I do not know how to use NWDS ,as i work in KM and Collaboration area .SO if there is anyone who can guide me from configuraion point of view.I can also open the XML file and do the changes but how to execute it I do not know.Thanks in advance for any valuable input.
    Edited by: Arijit Bhattacharya on Feb 25, 2008 2:57 PM
    Edited by: Arijit Bhattacharya on Feb 25, 2008 2:59 PM

    Hi Arijit,
    try these links
    [http://help.sap.com/erp2005_ehp_03/helpdata/EN/01/ed0f412d72f323e10000000a155106/frameset.htm]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8]
    hope this helps you
    Regards,
    vv.

  • KM Discussions iview

    Can anyone please give me a few lines on how do we describe a KM Discussions iview, surprisingly i havent been able to find a single pdf or word doc can anyone help me with a doc abt this please..
    Regards
    Sunny

    Hi
    Are you speaking about classical Discussion iViews? o the new Sap Forums (jive forums)
    Ir you are using old Discussion iViews, there is the link:
    http://help.sap.com/saphelp_nw70/helpdata/en/01/ed0f412d72f323e10000000a155106/frameset.htm
    regards,
    Leandro

  • KM Discussion Admin IView and KM Discussion IView

    Hi Experts,
    Can anybody tell me how to use KM Discussion Admin IView and KM Discussion IView and their major purpose ?  I need to work on these, but ! i don't know how to use them .
    Thanks in advance
    Suresh

    Suresh,
    It is simple, if you are working on the "KM Discussion Groups Contributor iView" you can participate in a group discussion.
    For Example : How can we improve the performance of our sales team
    If this is a discussion that is posted, you can be a part of it and post your comments to this discussion.
    And if you are working with the admin iview, it will have the authority to delete some discussions, for example, if somebodys post is not in the context, you can delete it or if you want to you can delete the discussion itself.
    Hope this helps.
    Cheers,
    Sandeep Tudumu

  • Integrating Page Title iview and Discussion Iview

    Hi,
    We have assigned the customized Default Framework Page to the 'Everyone' group wherein we have removed
    the Page title bar Iview. So the users dont have the option of the 'History' and 'Back' buttons available on that iview.
    We dont want to make this iview available to all pages as it is consuming some space.Our problem lies here:
    In the Room Directory page, We get the list of available rooms. When any of the available rooms are clicked, it takes us to
    the Discussion iview. Here, since there is no Page title bar available, the users are not able to navigate backwards.It is only
    here that we want to make the Page title bar iview available.But since on clicking on any of the rooms, it takes us
    directly to the Discussion iview and not a Page, we are not able to integrate the Page title bar iview.
    Please help us in this regard.
    Regards,
    Prathamesh Dalvi.

    Hi,
    Even I was trying for the solution which you have suggested but the problem is how to call the new page which contains the discussion iview because, by default, all the rooms show the link which points to the original Discussion iView. How can we change the link to point to the new page.
    Also is there any other provision of adding a 'Back' button.
    Regards,
    Prathamesh Dalvi

  • How do I customize the CNN and Wall street journal apps on my iPhone 6 to only show news about business and technology, and not shootings or murders?

    How do I customize the CNN and Wall street journal apps on my iPhone 6 to only show news about business and technology, and not shootings or murders?

    First, we are not Apple, we are other users like you trying assist with hardware problems.  We cannot help with warranty issues.
    Unfortunately, Apple cannot and will not help you unless your iPhone is returned to the US (in person, not by international mail).  The warranty is not international.  This topic has been discussed on this forum since before the 5s was released.  Please tell all of your friends not to buy an iPhone in another country unless they are willing to forego warranty and service from Apple.

  • Discussion iVIew

    Hello all,
    I have created a KM discussion iview. Now I want to change the layout of the iView in terms of the information text, and also disable a few buttons like delete and subscribe. Can someone please shed some light on how this can be done?
    I see a KM discussion iView .ept file, do I have to do anything there?
    Please help.
    Thanks in advance
    J

    Hi Paddie,
    check out this thread: problem with discussion group contributor iview
    You can use your own LayoutSet in the Discussion iView where you can remove some commands from the used Command Groups in order to "disable a few buttons". You need to follow my descriptions in order to get the discussion iView to use only your LayoutSets.
    Hope this helps,
    Robert

  • Discussion iView of Portal

    Hello
    It's my Task to Creat a forum in Potal.
    How should I do? I  could only use Discussion iView
    because My limit knowlegde! So i must Creat many page
    and iVeiw.
    Who can tell me more Simple method .or give some information about How to build A forum in Portal
    I really want I can finish this Task.
    Please help.
    Best Regards
    Han

    Hi There,
    There is no need for you to create iviews and pages. Portal comes up with COLLABORATION CONTENT that would cater your requirement to create a forum. Here you can create your forum and maintain it.
    Naveen.

  • How do I customize my html page in Dreamweaver CS5 to an Avery template that I wish to print out?

    How do I customize my html page in Dreamweaver CS5 to an Avery template that I wish to print out?

    Dreamweaver and websites do not easily match up to Avery templates.  If you are trying to develop a program for customers/etc to print labels, you should look for a script to generate a PDF file to ensure the accuracy of the printing.
    If you are trying to use Dreamweaver as a substitute to print your own labels, I would highly recommend using Microsoft Word, or Adobe InDesign for a better solution.

  • How do I customize the forms to the SharePoint list

    I need to customize a form to a SharePoint list that I created in Visual Studio.
    After the deploy list, try to customize the EditForm.aspx, NewForm and forms, however when publishing the form of a message that basically says catastrophic error is displayed:
    This form is not a standard SharePoint.
    How do I customize the forms to the list created?

    Hi,
    Here is a link which describe how to customize SharePoint list forms using Visual Studio, Please compare it with your code and see if there is any possibility causing the error.
    http://www.codeproject.com/Articles/223431/Custom-SharePoint-List-Forms
    More important, I’d strongly recommend you using InfoPath Form to custom list form for SharePoint. For your convenience:
    http://msdn.microsoft.com/en-us/library/office/aa947697(v=office.15).aspx
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • How do you customize toolbar in Numbers 3.0?

    How do you customize toolbar in Numbers 3.0?

    Hi Rellim,
    The Format Inspector > Text has the tools
    Regards,
    Ian.

  • How do I customize the login page?

    Hi, floks:
    How do I customize the login page?
    Can I just create a page with login portlet in it? what do I put as on Success URL,
    if I choose to go to the home page?
    thanks.
    null

    You can create a page and add a login portlet to it.Make it accesible to public.
    change the default page of the user "public" to the page you have created.(by default it is WELCOME)
    if there is an error in the user name or the password entered the portal still navigates to the default single-sign on page.(You have not changed the sign on page still)
    To change this page look at on-line help.
    search with string "customize" in online help
    null

Maybe you are looking for