How do I customize the Push Notification sound?

Searching the Internet, I found a solution that involves installing special software that I do not want to do.
I also found a procedure shown below. The problem is, that switch and selection ( Notification Sound) does not exist on my iPhone.
The current sound I appear to be getting is the Tri-Tone. I find this hard to hear and I usually miss it, I was looking for something louder. Sadly, the Android version of this app has the notification sounds changeable.

Similar Messages

How can I fix the push notifications problem on my iPhone 5?

When I bought my iPhone 5 it came with an AT&T sim card in it. And I activated my iPhone and my apps with it, then I changed the sim card to my provider's sim card and since that day I haven't been getting push notifications. Is there something that I can do? Pls help me.

lucky_patel wrote:
so why showing this both function in iPhone 4s on BSNL carrier
Yes the list is for Apple devices.
Told you that Apple is going touch because the supported carriers complained.

I reset my iPhone 4 Network settings to fix the push notification problem, but I lost my internet connection. How do I fix it?

I tried to solve the "connect to iTunes to receive push notifications"-problem by resetting my network settings, but it only caused me to lose my internet connection when using 3G. Now I can't do anything with this stupid phone. How do I fix it? I don't want to reset anything anymore, I'm sick of this new iOs update, it seriously messed up my phone and I can't do anything properly anymore. Any help?
And btw, I would also like to get the push notifications back on. Connecting to iTunes did absolutely nothing. Resetting the network settings only made my situation worse. Help please!

Hi there Julia,
Ahh The iPhone isn't "stupid" it's been called "stupid" because you are frustrated at the situation , but try
Load iTunes. Backup your phone. Make sure it is backed up !! Run restore. This will get rid of the error! And please what ever you do , do not skip the back up!
Thanks,

HT1146 I want to hear the mail notification sounds. How can I get the sounds to stay active?

I am unable to keep the mail notification sounds on mail. No message notification, nothing. I have already had two consultations with mac service personnel. Any suggestions?

I also wanted to know, if I can assign my JV1080 to the audio Instrument tracks & manupilate both sound source. WOW that be great if Logic Pro can do this.
If you mean play them back with the same MIDI information, and have the MIDI channel set up to control the external JV1080, yes you can. But if you mean control the Audio levels and such, I would recommend bringing the JV1080 back into logic on a Stereo input and grouping it with the Audio Instrument.
I have the o/p of the md player going into tape i/p of the mackie 1202- VLZPRO.
I believe the Tape inputs of a Mackie board goes straight to the output faders. Try another set of inputs.

Can I change the email notification sound?

I can't hear the email notification sound on my iPhone. Is there a way to customize it? I have it turned up as loud as it will go, but, if I'm out somewhere, and my phone is in the holster, I can't hear it!
Any help would be appreciated!!
Stephanie

Hi Stephanie,
The email sound options are in Settings> Sounds. There is no option to change the tone.
You can leave iPhone feedback requesting a feature be modified here: http://www.apple.com/feedback/iphone.html
-Jason

Push Notification Sound - Easy Question

I have my gmail account push email through microsoft exchange with my iPad to get gmail, google calendar, and google contacts synced. I was just recently fiddling with this, and the mail notification sound now "dings" twice exactly when I receive this message. This is great, but I'm surprised that it makes the sound twice because I could have sworn it only made the sound once before I changed some settings a day ago.
Can anyone else verify that push email notifications ding twice rather than once?

I believe that I may have just determined where my problem was originating. Haha, of course it wasn't iOS that was malfunctioning - I had previously set my Mail to push sync my Gmail Inbox and select other labels that I frequent. If I received an email that also auto labelled itself then I would hear the ding twice, and if it was from someone random it would only ding once.
To fix this, I set my iPad to sync with gmail's inbox only, so now it functions as per default settings, which works well for me.

How can I implement GCM push notifications in AIR?

How can I implement GCM push notifications in AIR? How can I implement GCM in Android using flex?

You have 2 ways, first is buy the ane, are alot such as: http://myappsnippet.com/gcm/ or review the open in: https://github.com/freshplanet/ANE-Push-Notification or http://afterisk.wordpress.com/2012/09/22/the-only-free-and-fully-functional-android-gcm-na tive-extension-for-adobe-air/ , that for client side, for server side you can buy in http://urbanairship.com/ or enter in the world of build your own pisblisher server, in this case you need to read android and ios and blackberry notification, each one has different methods.
Also, here you have more information: http://forums.adobe.com/message/4626292
looks good.

Customize the Email Notification

Hi,
I need to customize email notification content.please help me.Any document any reference link help me.
Regards
Raji

Hi Raji,
You can have a look of the following ML doc,
[How To Personalize / Customize The Content Of An Approval Notification E-mail?|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=344346.1]
Hope this could help you,
Anchorage :)

When sandbox is testing, the push notification is done.

Hi
How should I do so that the push notification is not done though am transmitted the push notification when contents are opened to the public when the sandbox is tested to add contents with InAppPuachase of iOS?
Please teach when there is understanding.
My best regards.

Pages that use "mixed content" (some parts of the page use HTTP and some use HTTPS) are not secure from tampering, so they will not show the site identity button. To fix this, make sure the external resources you are embedding are available over HTTPS, and that you are using HTTPS to embed them.
For example, for iframe widgets like the Facebook "Like" buttons, make sure that that your iframe uses src="https://..."
See also the discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

How do I customize the forms to the SharePoint list

I need to customize a form to a SharePoint list that I created in Visual Studio.
After the deploy list, try to customize the EditForm.aspx, NewForm and forms, however when publishing the form of a message that basically says catastrophic error is displayed:
This form is not a standard SharePoint.
How do I customize the forms to the list created?

Hi,
Here is a link which describe how to customize SharePoint list forms using Visual Studio, Please compare it with your code and see if there is any possibility causing the error.
http://www.codeproject.com/Articles/223431/Custom-SharePoint-List-Forms
More important, I’d strongly recommend you using InfoPath Form to custom list form for SharePoint. For your convenience:
http://msdn.microsoft.com/en-us/library/office/aa947697(v=office.15).aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How do I customize the login page?

Hi, floks:
How do I customize the login page?
Can I just create a page with login portlet in it? what do I put as on Success URL,
if I choose to go to the home page?
thanks.
null

You can create a page and add a login portlet to it.Make it accesible to public.
change the default page of the user "public" to the page you have created.(by default it is WELCOME)
if there is an error in the user name or the password entered the portal still navigates to the default single-sign on page.(You have not changed the sign on page still)
To change this page look at on-line help.
search with string "customize" in online help
null

How to automatically off the push button

how can i set the push button to be off automatically after meet certain condition.
i attached simple example just to represent this problem
Solved!
Go to Solution.
Attachments:
ex.vi ‏7 KB

smercurio_fc wrote:
I think the user is actually asking how to stop the outer loop if the Stop button is pressed or the iteration count reaches 10.
To poster: You need an OR condition on the outer loop's conditional terminal. One OR input comes from the Stop button. The other comes from the case structure. In the False case you wire out a False Boolean constant. In the True part you wire out a True. You could also wire the OR input to the Boolean control directly since this amounts to the same thing.
Code comments:
Do not create greedy loops. Use a small delay so you don't starve the CPU.
I think you want the inner loop's condition terminal to be "Continue if True".
You can use the Increment function rather than using an Add function and a constant of 1.
You don't actually need the inner loop at all. You can use a Feedback Node.
Adding to these comments it is important to note that if you read the value of a button to control stopping a loop you should always ensure that you read it AFTER you execute all of your code in the loop. If you don't you can easily end up with an "off-by-one" execution since the button will get read very early in the loop iteration and it will use that value when deciding if the loop should exit or not. It won't use the value of the button at that instance in time (end of teh loop iteration).
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How can I get the "Purchase more sounds" link to light up under GarageBand?

how can I get the "Purchase more sounds" link to light up under GarageBand?

Did you try it in the program monitor?

How do you customize the toolbar in Windows XP?

How do you customize the toolbar in Windows XP? When I right click on the menu bar the "Customize..." option is there but it does absolutely nothing.
Which brings me to the rhetorical question as to why it was necessary to shuffle everything around, was it broken? Did it not work? Since 2006 I've moved my mouse pointer almost instinctively to the left side of the screen, now all of a sudden I have to go right, is there a point?
This is like supermarkets that as soon as you have figured out where everything is, they shuffle everything around and now you are stuck in mystery shopping. At least they have economic reasons. Meanwhile Firefox seems disposed to make itself look more like Chrome, but hey if I wanted Chrome I'd get it.

Nope... Thanks, but Safe Mode does not do the trick. Oh sure you can move the buttons around and rearrange things to your liking, unfortunately it does not stay that way once you get out of Safe Mode.
I guess if you use an XP machine you are doomed to use FF's interpretation of what it should look like, which is ass backwards from what it has been for the past FIVE YEARS!!! Why not? It seems XP users are now the Freddo's of computing.
Someone should go to you developer's homes move everything around, forks in the basement, beds in the bathroom, TV up in the attic with the mice, dining table outside on the porch, see how you like it.

How do I customize the Push Notification sound?

Similar Messages

Maybe you are looking for