How do I cut bits out of a clip using imovie for ipad 3?

I have a clip that I want to cut a few different parts out of, tried looking at tutorials but all seem to be for the mac, nothing for ipad 3. Please help :)

Try this manual:
http://help.apple.com/imovie/iphone/1.3/index.html

Similar Messages

When using imovie for Ipad, how can I fast forward a project to cut the length down?

When using imovie for Ipad, how can I fast forward a project to cut the length down to fit under the 15 minutes required for Youtube? My current project is 23 minutes, and need to cut it down below 15 minutes. I was hoping to speed up the video. The content would actually be better viewed in at a faster speed anyhow.

Jon,
It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
Good luck,
Hunt

How do I cut bits out of iMovie, How do I cut bits out of iMovie?

Want to make a video and cut out some little bits of it.
Any ideas?

It looks like you have iMovie 08. Here is a good Tutorial for iMovie 08.
http://www.apple.com/findouthow/movies/imovie08.html#trimming
Here is a more complete answer. Portions of it will work in iMovie 08, but it has been a long time since I used iMovie 08, so I am not sure.
There are many ways to do this.
1) If you are dealing with Event clips, you can select just the portion you need, by dragging. A yellow border will be around this portion. Drag this to your project.
2) If the long clip is already in your project, it is even easier. You can select the portion you want to keep, by dragging. A yellow border will be around it. Then right-click within the yellow border and select "Trim to Selection".
3) Another way. If the long clip is already in your project, select the portion that you want to edit out, by dragging. A yellow border should be around the portion you want to edit out. Right-click within the yellow border and select "Delete Selection".
4) You can also do 2 and 3 through the EDIT menu rather than with a right click.
Note: If you do not have your two button mouse enabled in System Preferences, you can right click by holding down the control key as you click. For a Magic Trackpad, it is a two finger click.

How do I cut something out? (I've spent a lot of time researching already!)

Question: how do I cut something out?
i.e. remove the background
No need to ask in here: there must be a 1000 videos on youtube showing you how
Except: I've done this - in total I must have sat through 20 minutes of video - I don't think I've got my answer
The videos I've seen use the lassoo tool to very roughly cut out and just do a dodgy blur on the edges
This can't be the way it's done!!
I can use the lassoo tool myself and spend 5 days cutting a picture out
Is this how it's done??
Cutting pictures out = large time consuming task??
Someone once told me about a tool that you can use (That you have to pay for)
I can't remember what it's called
The magic eraser is great - 5% of the time
What am I missing?
Thanks
Omar

The online tutorials I've seen which make it look easy to extract a subject from the background are either professional studio images with proper lighting and a suitable background, or otherwise great shots which are sharp and have clear differentiation between the subject to be extracted and the background. If your image is not perfect like that, you may have to use a combination of several tools to improve your selection. After you've removed the background, you may have some work to do to to make the cut-out look natural against its new background. As R_Kelly has pointed out, without knowing what version of PS you have (= what tools you have at your disposal) and the specific challenges of your image, no one will be able to give you useful advice.

I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for that.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

How do I avoid importing MS Word file duplicates in Pages for Ipad 2?

How do I avoid importing MS Word file duplicates in Pages for Ipad 2?

Hi Cabrinii,
The sign on the door is a bit misleading, and you're not the first (or even the first in the last hour or so) to come to this Pages (Mac version) forum to ask a question about Pages for iOS.
Not many of us use iPad, so your question will be better served in the iWork for iOS community. The link will take you there.
Regards,
Barry

How iMovie for iPad works?

How iMovie for iPad works?What can I do inside? What are its features? For whom is that app is suitable?

Hello Min,
It sounds like you want some additional information about what the iMovie for iOS app can do, and some of its features. Check out the info on this page:
http://www.apple.com/ios/imovie/
And here is the Help site for iMovie so you can get more specific info about the things you can do with the app:
iMovie Help for iPad
http://help.apple.com/imovie/ipad/2.0/index.html
Thank you for using Apple Support Communities.
Take care,
Sterling

How can I insert an image into a cell in Numbers for iPad?

Hi,
is there any way to insert an image inside a cell using Numbers for iPad? I tried doing it on desktop version and it works, then I shared it through iwork.com and downloaded into my iPad and it's showing fine on the iPad ( although there's no way to edit or change the image inside the cell ) but when I try to do the same task on iPad itself, the image always comes floating even if I place the cursor inside a cell before inserting.
any idea how to do it or if it's even possible?
thanks.
John

Images can be added to cells only as "image fill." Cell fill is an attribute of the cell, not content of the cell. Only cell content can be retrieved by a formula or by copying the content of the cell.
Copying the cell will also copy its format, including the image fill, but I've found no way to extract the image from the cell.
Regards,
Barry

How can you utilise the 30 pin VGA adapter used on the iPad 3 and iPhone 4S on the iPad 4 which uses a lightning connector?

How can you utilise the 30 pin VGA adapter used on the iPad 3 and iPhone 4S on the iPad 4 which uses a lightning connector?

See the following. Also take note below and from the linked page above that video mode is NOT supported:
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
*Note below and from the linked page above that video mode is NOT supported*
"This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported."

How to create a generic with iMovie for iPad?

How do i create A generic with iMovie for iPad?

luckyuis wrote:
Hi All,
> I have generated a report showing data for past 12 months and after that i need to include a chart showing Month on X axis with data for past 12 months ..for example if i run the report for June 2011 then on the chart it should take as june 11..>may 11..>april 11........so on june 10 with respect to other values
>
> fyi .. i am using type: Numeric Axis..> Date Axis line chart and created seperate formule on top of date field to get past 12 months data
>
> Please advise how can i do that on the chart
>
> Thanks much,
> Lucky
Once you pull the data, goup on the date monthly, most recent first ,and then graph the summaries in the group.

How to create sharepoint Group with read only permissions using powershell for entire site ?

How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)

Hi
using (SPSite site = new SPSite(url))
using (SPWeb web = site.OpenWeb())
SPUserCollection users = Web.AllUsers;
SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
SPGroupCollection groups = Web.SiteGroups;
string GroupName = “Super Exclusive”;//your group name
string GroupDescription = “Super exclusive group description.”;
groups.Add(GroupName, owner, member, GroupDescription);
SPGroup NewSPGroup = groups[GroupName];
SPRoleDefinition role = Web.RoleDefinitions["Read"];
SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
roleAssignment.RoleDefinitionBindings.Add(role);
Web.RoleAssignments.Add(roleAssignment);
Web.Update();
Please 'propose
as answer' if it helped you, also 'vote
helpful' if you like this reply.

How to add additional disks on vmware OEL4 and use it for Oracle 10gR2?

I created a virtual machine on vmware workstation 6 and installed OEL4.
during first install I created 20 GB disk but now I want to add more disks.
from vmware documentation I tried to add more 8 gb disk to the virtual host.
under devices I see two lines;
Hard Disk (SCSI 0:0) 20.0 GB
Hard Disk (SCSI 0:2) 8.0 GB
but I must be missing some step since I can not see 20 + 8 gb at df;
[root@antuhost ~]# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/sda1              13G 9.7G 2.3G 82% /
none                  506M     0 506M   0% /dev/shm
/dev/sda2             4.9G 851M 3.8G 19% /homeThank you.

Oh the check the answer from Re: How to add additional disks on vmware OEL4 and use it for Oracle 10gR2?

How much computing horsepower do I really need to use iMovie?

How much computing horsepower do I really need to use iMovie effectively? I'm trying to make a one-hour movie from HD camcorder clips and still images. My iMac 24 with Intel Core 2 Duo running at 2.33 GHz and 2 GB of RAM severely bogs down and regularly locks up or crashes. Now that I've painfully managed to insert all of the video clips and still images, my iMac won't play the video back smoothly so that I can edit the work. Within a second or two, the video either stops or becomes extremely jerky, while the audio continues to play.
Do I really need an $8000 MacPro 12-Core computer running at 3.3 GHz, with 32 GB of RAM, twin, 2 TB hard drives, and a $1000 27-inch Apple display, or will something less costly work fine for producing videos?
Thanks for any advice,
Joe

Thanks for your reply, Klaus1. I'm currently running Snow Leopard. I'd considered upgrading to Lion but was told, even by Apple, that I wouldn't be satisfied with its slow performance on my iMac 24.
I have plenty of hard drive space with 160 GB available on my internal hard drive, but I've been storing the archived video clips and the iMovie projects on a fire-wired, external 2 TB drive. Could it be that using an external hard drive for the iMovie project is part of the performance problem?
A quick check on the Apple website shows that my iMac 24, which was manufactured in mid-2007, can support up to 4 GB of RAM. I wonder if I should consider a RAM upgrade before upgrading the entire computer. How big a deal is it to replace RAM in the iMacs?
Joe

How do I speed up an audio only clip in iMovie?

How do I speed up an audio only clip in iMovie? I've added a song to a video clip and I'd like to speed up the song. I already sped up the video clip.

iM08 didn't have that feature.
• purchase iM09 (Disks) or iM11 (only avail via download/AppStore, you'd need MacOS10.6 doing so)
• or use a free 3rd party tool, workflow described on my website:
https://sites.google.com/site/karstenschluter/slowmowithim08

How do I delete video clips from imovie on IPAD?

How do I delete video clips from imovie on IPAD?

BTW, I went into Photo and deleted most of the unwanted videos and photos but 1 photo stubbornly stays in the area for editing and I can't find a way to close it in order to delete it. Help!

How do I cut bits out of a clip using imovie for ipad 3?

Similar Messages

Maybe you are looking for