How do I cut on the red line?

On my time line I can pause my clip right where I want to cut it and theres that red vertical line that runs through the timeline but when I go to the razor tool its free moving and I want to cut exactly on the frame I have the red line paused at. How do I do this? Also, if I have a bunch of clips on my timeline and I want to shift them all to the right so I can insert a clip, how do I do this?

What does track enabled mean?
Targeting tracks
AND...
You really should at least glance at the information
in the links I have repeatedly posted for you that
specifically describe the things you are still asking.
http://forums.adobe.com/message/5270001#5270001

Similar Messages

While editing, my photos stopped changing. Even as the red line moves and music plays, the photo is stuck. How do I fix it?

While editing, muy photos stopped changing. Even as the red line moves and the music plays, the photo is stuck on first frame. How do I fix this?

BDAqua and old comm guy,
thanks so much for the good advice. I used both of these and now the problem has stopped. first I checked the finder crash logs and yes, my finder had been crashing repeatedly.
next I removed the preferences files from the library, rebooted from the CD and ran disk utility to repair preferences. since then my computer has been stable.
there were some preferences that didn't get repaired when I ran disk utility. I am copying them here to refer to later if I need to. I don't understand what these mean to me:
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.

How can I follow the red line in the timeline?

Bit of a basic question, but when i play through a song i want it to follow with the red line, but it keeps going off the screen and it never follows it
how do i put it back on?

thanks

Hyperlink cut after the first line

Hello,
we use adobe acrobat pro with adobe pdf printer. when we print a word document with hyperlinks over several lines with the pdf printer and open it after printing then the hyperlink will show's in the pdf document but the hyperlink will cut after the first line...
can anybody tell my how i can fix this problem?
thank you
regards
christopher

The links you see in Acrobat or Reader after you print to the Adobe PDF printer are just the best guesses of these packages when it sees something like a link. To get the links embedded you either have to do it in Acrobat directly or use the Convert button as Bernd mentioned.

How do you cut out the part of an image in a photo?

How do you cut out a part of an image on a photo that you have added to Pages. For example, if I have added a picture of a giraffe to Pages how would I cut out the giraffe from the image and get rid of the rest of the image

You can use the instant alpha tool to make the background transparent.
FYI: Pages is part of iWork, not iLife.

MY new Ipod Nano does not hold a charge. I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time. I drains to the red line in less than 2 days. My husband's nano will last a week this way.

MY new Ipod Nano does not hold a charge. I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time. I drains to the red line in less than 2 days. My husband's nano will last a week this way. I thought it drained because of looking at photos, so I quit looking at them and it made no difference. Am I doing something incorrectly to cause this short battery life?

You are still under warranty if your iPod is "new." Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP. Whichever is more convenient for you.

Why can't I see the red line indicating that i typed a word wrongly

i already check the box that says check my spelling as i type but the red line indicating a wrong word doesnt show up.

I see you have the English-GB version of Firefox, that one does not include a dictionary. You can install the British English dictionary from https://addons.mozilla.org/firefox/addon/british-english-dictionary or if you want another version of English, from https://addons.mozilla.org/firefox/language-tools

How to change color in the title line?

Hi experts, How to change color in the title line, i show an image for explained better
!http://img688.imageshack.us/img688/9259/imagenjar.png!
thanks

in Views.css file
file below object.and change border-color as you desired to reflect.
.TitleTable {
     font-family: arial, helvetica, sans-serif;
     border-width: 0 0 4px 0;
     border-style: solid;
     border-color: #6666cc; ----> change here.
hope this helps !
-Niranjan K

A few seconds after render finishes, the red line re-appears above timeline.

Hello
I am editing a video consisting of still pictures (jpgs) on Premiere Pro CC 2014.
I am using dynamic link with After effects in order to add some animation effects on the still images (sky replacement, puppet, projection etc..)
After doing some work on AE, when I get back to Premiere, a red line appears above the timeline, meaning that I must render that clip (which was just worked on in AE)
Recently the performance while rendering became very slow (rendering inside Premiere by pressing "Enter" on the keyboard)
I just waited several hours for it to finish rendering a part of my clip. It finally finished.
I then played the video and it was running smoothly.
However, after a few seconds, without me doing any changes !!! suddenly the red line above the timeline reappeared.
And now, the video seems to be un-rendered, and it is either not playing or getting stuck all the time.
Does anyone have any idea what could be causing this?
This is extremely frustrating and looks like something is terribly wrong with Premiere.
screenshot is attached.
Thanks,
Tal

I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

Silly questions but new on apple, Q1 how do I cut and paste Q2 when I have a spelling error with the red line under it how do I correct it?

Q1 How do I cut and paste
Q2 how do I correct a spelling error when it has a red line under it?

Lynnie2002 wrote:
Q1 How do I cut and paste
Highlight the item.
Finder>Edit>Copy
Place the item where you want to
Finder>Edit>Paste
There is 3rd party software that makes cut & paste easier with just 1 or 2 steps.
Q2 how do I correct a spelling error when it has a red line under it?
You can find the correct spelling in the Apple dictionary. Just add the correct spelling & delete the error.
Care to share which OS you are using and which model iMac you have?

Digitizing DVCPro 50 and Mini DV with the red line

I've digitized from DVCPro 50 with Capture Settings at DV 50 NTSC 48khtz and Video Playback at DV 50 NTSC 48khtz and Playback firewire 720x480.
Now I'm digitizing the Mini DV portion (Broll) with Capture Settings at DV NTSC 48khtz and Video Playback at DV 50 NTSC 48khtz and Playback firewire 720x480.
When I put clips of each in a sequence together, a red line appears over the DVCPro 50 footage. I render the DVCPro clip and both play fine.
Did I set up something wrong? Is there a short cut to rendering all my DVCPro 50 dailies? I can easily re-digitize the Mini DV footage but the DVCPro 50 deck was a rental and over 30 hours so can't back-track there.

Can't digitize the Mini DV's in DVCPro 50 settings because FCP won't let me, at least not without a DVCPro 50 deck so I'm going to try the export, re-import plan.
I want to be sure not to bolox up the media management so should I isolate the media? Here are the steps I'm contemplating:
tuck away all the FCP files on the scratch disc that pertain to DVCPro 50
create a new DV NTSC project with a new name
digitize the Mini DV media with DV NTSC settings and capture
export these files as DVCPro 50 to other drive with DVCPro 50 media
go back to the initial project and import bumped-up clips
put the MiniDV project and media in a folder
take the DVCPro files out their isolation folder

Skimming not working, the red line will not follow my mouse anymore, why?

When I try to skim my video to choose what I want to use in my project, it won't skim anymore. The red skim line will not move with my cursor. Did I somehow turn it off? How can I get it to work again? Thanks

Hi Dani, After speaking with a sales representative I have been advised that there are no available ports at my address. I was mostly sure this would be the situation, and this only adds to the frustration of our family. Just because we live in an area considered 'rural' we are treated with terrible access to any kind of fixed line internet connection at all. Is there any way for our family to recieve any kind of compensation for the fact that we cannot be supplied with the same quality and quantity of internet that most other people within a 50km radius of our house, can get? I do not understand why we have to deal with the comparatively tiny data amounts of the mobile broadband modems, and cannot even get a matched data quantity, seeing as we pay much more than the regular household to achieve not even a quarter of the data provided by one of the smallest residential ADSL bundles. I understand that these modems are intended for mobile use and this is why they are priced up, but the modems never leave our address which I'm sure some Telstra employee with access to IP tracking programs can clarify, they are soley for our home internet, and our family is grealty inconvinienced by the lack of ports to our area. Is there any way that we can request a port increase for our exchange, or any similar avenue to even slightly shorten the time our family has to wait for internet so that they can keep up with colleagues and peers in terms of schooling and work? As our location is not on NBN's 3 year plan, which gives us at least 3 more years until we can access high data-limit broadband services, and by then who knows how much more technologically integrated our society will become. Any information as to who we can talk with to try and achieve any kind of comparitvely capable internet services would be greatly appreciated, as would any information about the status of increasing port availability.

How can I stay on the same line when inputting values in the CLI?

The title is a bit vague i know :) but i have this issue which isn't really a problem but it would be better if I can solve it.
Intro)
I've made this simple addition (and more options but thats not relevant) application for kids in my spare time so that they can train their maths in school and compare their results with other students which is saved in the database using the hypersonic DB that comes with the JBoss application server.
Now so far so good, but i'm having an issue with the Scanner (I think, but i doubt its because of the CLI) , when i enter a number or text it works and exceptions will be catched etc but when i press the enter key without anything entered the input value wil be displayed a line below and that's not what I want. I want it to stay in the same line.
Sample CLI output:
bla application
***By: deAppel***
Ver: 31/10/2007
Your name:     deAppel
Your class:     MasterClass
How many sums you want to make? 14
Time: 22:03:27
1: 32 + 40 =     72
2: 38 + 19 =     57
3: 5 + 57 =     62
4: 30 + 20 =     1
5: 57 + 54 =     2
6: 33 + 17 =     3
7: 38 + 54 =     4
8: 23 + 23 =     5
9: 48 + 47 =     95
10: 29 + 55 =     6
11: 48 + 11 =     7
12: 1 + 40 =     41
13: 46 + 35 =     91
14: 23 + 52 =     75
Answer 1:      72     You answered:      72     (good)
Answer 2:      57     You answered:      57     (good)
Answer 3:      62     You answered:      62     (good)
Answer 4:      50     You answered:      1     (wrong)
Answer 5:      111     You answered:      2     (wrong)
Answer 6:      50     You answered:      3     (wrong)
Answer 7:      92     You answered:      4     (wrong)
Answer 8:      46     You answered:      5     (wrong)
Answer 9:      95     You answered:      95     (good)
Answer 10:      84     You answered:      6     (wrong)
Answer 11:      59     You answered:      7     (wrong)
Answer 12:      41     You answered:      41     (good)
Answer 13:      81     You answered:      91     (wrong)
Answer 14:      75     You answered:      75     (good)
EndTime: 22:04:18
Total good: 6
Total wrong: 8
Total sums answered: 14
Final score: 42.857143%
Upload score? (yes/no): no
Compare score from other users? (yes/no): no
Want to try again? (yes/no): no
********Made by: deAppel @ http://www.link removed cause it doesnt matter .com*********
************The application will close within 5 seconds*************
To sum it up for those that don't like to read my post:
1: 32 + 40 = 72
2: 38 + 19 =
whitespace <-- this happens because of the enter
whitespace <-- this happens because of the enter
57
3: 5 + 57 = 62
I want the input to stay in the same line unless you have typed something. I feel silly for not knowing how to handle this.
Hm.. i'll tried to solve it myself but it seems that im unable to do that.
/me takes a quick coffee break and will look at the code again after that *

paulcw wrote:
It sounds like you want either a CURSES implementation (I believe there's one for Java), or just move to a GUI.I was planning to create a GUI for it eventually, but i just wanted to solve this one first and make sure everything works the way i want it too. I'll take a look at the CURSES implementation thanks.

How to get rid of the reference lines on the front panel

I forgot how I created a couple of horizontal and vertical reference lines on the front panel. It looks like the origin lines on the front panel. When I move my program to another monitor with different resolution, all the layout is messed up because of the reference lines can not change with the resolution. Did anybody meet this before? How to get rid of them?
Attached are the 2 creen shot of front panels.
Thanks in advanced.
Solved!
Go to Solution.
Attachments:
front panel.png ‏63 KB
front panel2.png ‏42 KB

You will have to click on the top menu and choose options see below
when you do this window will pop up and you scroll down until you get to the front panel options. See below
Tim
Johnson Controls
Holland Michigan

How to delete value in the header line of itab

dear all,
i have create an internal table.
i would like to delete value of the header line after have used read table to read the contents.
how can i do it ?

If your internal table is something like this:
data: begin of i_mara occurs 0.
include structure mara.
data: end of i_mara.
That clears the matnr field of the header line...
CLEAR i_mara-matnr.

How do I cut on the red line?

Similar Messages

Maybe you are looking for