How do I de-activate a workflow?

Hello friends,
A second question about workflows. How do I de-activate a workflow? That is to say, stop it from running all together. This workflow has many steps and many associated events.
Many thanks for your input.

Hi,
If I undertsand correctly your question you want to stop the event that triggers your workflow.
Because a workflow is not processed unless that a event is trigger
To do this you have the execute transaction SWETYPV and diactivate the TYpe Linkage Active flag corresponding to your workflow.
Hope that the following info has answerd your question
Regards

Similar Messages

  • CUP - How to de-activate the workflow types - SP10

    Hi forum gurus,
    I am currently customizing a brand new installation of AC 5.3, SP10.
    We have activated all the workflow types under the Miscellaneous tab by mistake, which has now resulted in several
    unused request types.
    I have tried to de-activate the workflow types but get the following error, Cannot deactivate since the field is in use in Request Type.  The system does not even allow you to delete the request types only to de-activate it.
    Is there any way to deactivate these workflow types so that they do not appear?
    Thanks,
    Prevo.

    Hi Alpesh,
    NO requests have been created thus far! Its a brand new implementation.
    I don't want non-used initiators and request types to be displayed from within
    the CUP configuration tab, hence my request.
    Rgds,
    Prevo

  • How can i re-activate my ipad with my own ID

    How can i re-activate my ipad with my own ID, pls i need an urgent reply.
    Thanks.

    Are you trying to activate a used iPad? You may not be able to due to being Activation locked. The previous owner did not erase everything.)
    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    iCloud: Activation Lock
    http://support.apple.com/kb/PH13695
    Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/TS4515
    How to Fix an iPad When It Says It "Could Not Activate"
    http://everydaylife.globalpost.com/fix-ipad-says-could-not-activate-26085.html
     Cheers, Tom

  • How do I manually start a workflow to...

    I have a list with 2000+ items in it. I create a 2013 workflow in SPD that will look at an item and if it date is less than 1/1/2013 it will create a copy of the item on a list used for archiving, then delete the existing list item. 
    My question is how do i manually start this workflow on the entire list (instead of selecting 1 item at a time)?
    Thanks
    James T.F

    @Romeo
    I've found to potential PowerShell scripts that could launch a list workflow from powershell, but they both throw errors for me. 
    # URL of the Site
    $web = Get-SPWeb -Identity "https://sharepointsrv/site1"
    $manager = $web.Site.WorkFlowManager
    # Name of the list
    $list = $web.Lists["Shared Documents"]
    # Name of the Workflow
    $assoc = $list.WorkflowAssociations.GetAssociationByName("On Item Created","en-US")
    $data = $assoc.AssociationData
    $items = $list.Items
    foreach($item in $items)
    $wf = $manager.StartWorkFlow($item,$assoc,$data,$true)
    $manager.Dispose()
    $web.Dispose()
    this gives me the following error
    Exception calling "StartWorkflow" with "4" argument(s): "Value cannot be null."
    At line:15 char:28
    + foreach($item in $items) { $workflow = $workFlowManager.StartWorkFlow($item,$wor ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : ArgumentNullException
    The other PS Script
    $sourceWebURL = '<URL>'
    $sourceListName = '<List Name>'
    $TargetWorkflow = '<Workflow Name>'
    $spSourceWeb = Get-SPWeb $sourceWebURL
    $spSourceList = $spSourceWeb.Lists[$sourceListName]
    #Getting a Workflow manager object to work with.
    $wfm = New-object Microsoft.SharePoint.WorkflowServices.WorkflowServicesManager($spSourceweb)
    #Getting the subscriptions
    $sub = $wfm.GetWorkflowSubscriptionService()
    #Getting the specific workflow within the list of subscriptions on the specific list. (SP2010 associated workflows basically)
    $WF = $sub.EnumerateSubscriptionsByList($spSourcelist.ID) | Where-Object {$_.Name -eq "$TargetWorkflow"}
    #Getting a Workflow instance in order to perform my commands.
    $wfis=$wfm.GetWorkflowInstanceService()
    Foreach($item in $spSourceList){
    #Creating the dictonary object I need to parse into StartWorkflow. This could be most other workflow commands.
    $object = New-Object 'system.collections.generic.dictionary[string,object]'
    $object.Add("WorkflowStart", "StartWorkflow");
    $wfis.StartWorkflowOnListItem($WF, $item.ID, $object)}
    Which then gives me this error.
    Cannot convert argument "itemId", with value: "GUID", for "StartWorkflowOnListItem" to type "System.Int32": "Cannot convert the "GUID" value of type "System.Guid" to type
    "System.Int32"."
    At line:23 char:5
    + $wfis.StartWorkflowOnListItem($WF, $item.ID, $object)
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [], MethodException
    + FullyQualifiedErrorId : MethodArgumentConversionInvalidCastArgument

  • Iphone is dead, gone  to insurance co. for replacement. They say because "Find My iPhone" is still active, they can't replace or try to fix it. problem is can't log in to de-activate it, cos email account does not exist anymore. How can I de-activate it?

    iphone is dead, gone  to insurance co. for replacement. They say because "Find My iPhone" is still active, they can't replace or try to fix it. problem is can't log in to de-activate it, cos email account does not exist anymore. How can I de-activate it?

    You never used your iPhone?
    You never logged into iTunes?
    Your AppleID & Password for iCloud&  iPhone should be the same AppleID &Password you used to log in here and post a message.
    -> Find your Apple ID

  • How to send a mail in workflow keeping 1 receiver in CC and the other in TO

    Hi,
    Can anybody tell me how to send a mail in workflow keeping 1 receiver in CC and the other in TO.
    I need to send a mail to an employee keeping his/her manager in CC through workflow.
    Regards,
    Lavanya

    Hi Lavanya,
    I dont think its possible using Send mail step type.
    But it can be done by using the FM SO_NEW_DOCUMENT_SEND_API1. Just create a method and Call this FM accordingly.
    Thanks,
    Viji.

  • How to create distribution list in workflow? for  sending mail or work-item

    Hi,
    How to create distribution list in workflow? for  sending mail or work-item to multiple users.
    Regards,
    Surjith

    Hi Surjith,
    A.Working with Distribution Lists Creating a Distribution List.
    1 Businees Workplace->shared folder - create new subfolder name = WF_distributor
    2.Then click on the distribution list in Businees Workplace.
    say create Name = WF_Vliste
    folder Name = WF_distributor
    3.distribution list content tab
    Enter Recipient (SAP User ID)
    B.Wrkflow Builder
    Find out the dialig step in which u want to use distribution list
    Use workflow Rule 30000012 (SWX_READ_DLI).
    Maintain the binding from workflow container to rule container.
    Just pass the name of the distribution list from WF to Rule container.
    Regards
    Sagar S

  • How to change the recipients in workflow?

    I'm not  a workflow expert. Please help me how to change the recipients in workflow.
    The approver already resigned and we would like to change it to a new approver.
    We already deactivated the user and I stiil see him in SOST.
    In some releases, he is the approver and we would like to change it.
    Hope you can help me. Just kindly let me know if you still have queries.
    Thank you!

    Ask your workflow admin to define a substitution and/or forward the workitems.

  • How to use secondary method in workflow?

    Hi friends,
    can anyone plz let me know how to use secondary methods in workflow? it would be helpful if u explain with an example..
    thanks and regards,
    Arun.S

    Hi Arun Kumar,
    The Sec Method can be used in the user decision step. The secondary methods are executed along with the user decision step. You have 3 options. Either execute a secondary method before executing the user decision step or after execution of user decision step or while executing the user decision.
    For this define the methods either in Methods before execution of workitem execution to execute it before user decision step or Methods after execution of workitem so as to execute it after the execution of user decision.
    In order to execute a method along with user decision step execution use secondary methods (amodal call.)
    Let me know if you have any queries.
    Regards,
    Raj

  • How to determine the agent of workflow administrator

    In the workflow, when there is any exception raised, we need to send notification to workflow administrator. My question, how to determine the agent of workflow administrator.

    Hi jrockman li,
    No it is not like that, i mean that administrator for workflow will a single person so you can simply give his userid as the agent.
    As you told "YES SAP HAVE WORKFLOW ADMINISTRATOR ROLES"
    SAP_BC_BMT_WFM_ADMIN          Administrator for Business Workflow
    SAP_BC_BMT_WFM_GP_ADMIN   Role for Guided Procedure Business Workflow Administrators
    SAP_BC_BMT_WFM_UWL_ADMIN UWL: Administrator for Workflow Functionality
    You can use this roles for the agent determination purpose for the workflow administrators.
    Thanks and Regards
    Balaji K.

  • How can I de-activate a mac device remotely

    I already have the maximum allowed five devices linked to my apple ac. One of them is an old and out-of-use laptop that I need de-activate as a device in order to activate my iphone. How can I de-activate the old laptop without finding it and booting it up? Can I de-activate it from my main Mac desktop?

    http://support.apple.com/kb/HT1420
    If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
    Click iTunes Store on the left side of iTunes.
    If you're not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.
    Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).

  • HT4623 how do i re activate my i phone 3gs

    how do i re activate my i phone 3gs i dont no wat i did

    If your iPhone was hacked or jailbroken then there's no help here. The Terms of Use in this forum forbids helping hacked or jailbroken iPhones.
    Try google or some other places.

  • My itunes account says disabled!! how do i re-activate it??

    my itunes account says disabled!! how do i re-activate it??

    how do i contact them?... i have tryed bout everything i have found on the internet

  • HT1725 How do I re activate my security questions

    How do I re activate my security questions

    Welcome to the Apple Community.
    Start here, and reset your security questions, you will receive an email to your rescue address, use the link in the email and reset your security questions.
    If that doesn't help or you don't have a rescue address, you might try contacting Apple throughiTunes Store Support

  • Can someone tell me how to work with XML and workflow?

    Ive insert a XML file in a CLOB data type column of a table. Now I want to
    use some tags of this clob in a process of ora workflow. I know that there is a standard function get tag, but how can I say where the tag must get his information?
    Oracle should foreseen a document with step-by-step instructions, how to use XML in Oracle workflow. There is nothing to find on OTN or Metalink or even the internet to do this.
    Thanks for your time

    If you are using the standard XML Get Tag Value activity, you can specify the tag set in XPath notation. For details about this notation, see the W3C Recommendation "XML Path Language (XPath)". Note that this standard activity looks for the CLOB within an event message structure. See:
    http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/workflow.920/a95265/std21.htm#xmlgettval
    Ive insert a XML file in a CLOB data type column of a table. Now I want to
    use some tags of this clob in a process of ora workflow. I know that there is a standard function get tag, but how can I say where the tag must get his information?
    Oracle should foreseen a document with step-by-step instructions, how to use XML in Oracle workflow. There is nothing to find on OTN or Metalink or even the internet to do this.
    Thanks for your time

Maybe you are looking for