How do I de-install Garage Band?

I have recently installed iLife05, but I have no interest in using Garage Band. How do i de-install it, so that I can reclaim the space?

Hello again Stephen,
Once you have identified the files using spotlight, drag them to the trash using the mouse and delete them.
Its always a good idea to repair permissions after deleting / adding Applications.
Hard drive > Applications > Utilities > Disk Utilities.
Hope that helps some
Regards
Ian

Similar Messages

How do you install Garage Band on iOS6

I have an iPod Touch 4g with ios6. I wanted garage band but I need iOS7 for it. I can't sync my iPod to iOS7. How do you install garage band on iOS6. I haven't installed garage band ever and i really want it or I will have to get an iPhone for christmas and upgrade to iOS 7 on that.

If the app is not compatible with ios 6, then you cannot get it with ios 6.

I can not install garage band for my mac book

I am trying to install garage band 11 for my mac book 2007. I could down load it but never be able to open it. I am appriciate if any one could teach me how to open it.
Thanks

You could try & reset the Admin password as said here:
https://discussions.apple.com/docs/DOC-4101
or:
http://www.coolestguidesontheplanet.com/reset-forgotten-admin-password-osx-10-8- mountain-lion/
And if computer has SL 10.6.8, or before see different info page.
http://support.apple.com/kb/ht1274
If the password in question is a Firmware admin password that is more complex:
http://reviews.cnet.com/8301-13727_7-57542601-263/efi-firmware-protection-locks- down-newer-macs/
Hopefully this helps.
Good luck & happy computing!

How do you add non-Garage band instruments into a Logic project so that you can hear them on playback?

How do you add non-Garage band instruments (orchestral instruments) into a Logic Pro (8) project so that you can hear those insrtruments' sounds on playback? I've tried to understand and follow the Logic Pro 8 User Manual, but the process comes off as so complex and the writing so technical that it does not help but only confuses.
To be precise - I want to add instruments (orchestral) that are not offered in the current Garage band menu which is offered in the Mixer's channel strip menus for Logic Pro 8. To be clear, the instruments that are offered are Bass / Drum Kits / Guitars / Mallets / Organs / Pianos and Keyboards / Synth Basics / Synth Leads / Synth Pads. Most of these that I've tried seem to work and give their characteristic sound when placed in a particular channel and playback is clicked.
However - there is one orchestra instrument offered in the standard Logic Pro 8 Mixer channel menu and it's the item labelled "Performance - 000 flute 1 or 001 flute 1." And it is this instrument that presents a problem. When I click on it and choose it from the menu and enter it as the instrument of choice for a specfic channel / track in my Logic Pro project arrangement, when playing back the music for the overall piece this particular track, the flute, does not playback and produce the notes (Midi events) in the track in the sound of the flute. Instead, nothing comes out at all. I can't imagine why this does not work. Any ideas, anyone? Again, when choosing this instrument for a track and clicking the playback no flute sound is forthcoming. Why not? I have not tried them all, but when most of the other various types of keyboards, such as an electric piano or an organ, are chosen for a track the playback successfully renders the sound of these instruments. Why then does playback not produce the sound of the flute when it has clearly been chosen to play and sound the Midi events given it?
Anyway, the overall, larger issue for me is the inability I have to choose and get non-Garageband instruments (largely orchestral) to play the Midi events given on various tracks. If my guess is correct then technically, orchestral instruments not offered in the standard Logic Pro 8 Garageband Mixer channel menu are referred to as external Midi sampled instruments - still, IMHO the process is not clearly spelled out in the User Manual. The simple step by step process whereby a non-Garage band instrument, say an orchestral instrument, is placed in a channel replete with Midi event (notes) waiting to be played should be easy, logical and given in a simple to follow format, but is not.
What with all the talk of routes, busses, auxillary channels, GM devices, GM mixers, audio bins, libraries and audio files this Logic Pro User is confused to the max. Can someone please help me and, in simple English, describe the step by step process whereby presumably external sampled orchestral instruments can be successfully employed, in any given Logic Pro arrangement project, to render their characteristic sounds upon playback?
On my two Macs, one a laptop and one a much larger Mac, I have any number of the GSO (Garritan Symphony Orceshtra) and Vienna Symphony Orchestra instrument library samples - and yet - I've yet to figure out how to actually get them INTO a Logic Pro project of any kind! To put this as a question, even as a humble request, how can I make good use of these orchestral sample libraries in a Logic Pro project? Can someone steer my to a clear resolution of this issue. I'd sincerely appreciate it! Thanks all!
DavidBacon

DavidBacon wrote:
Anyway, the overall, larger issue for me is the inability I have to choose and get non-Garageband instruments (largely orchestral) to play the Midi events given on various tracks. If my guess is correct then technically, orchestral instruments not offered in the standard Logic Pro 8 Garageband Mixer channel menu are referred to as external Midi sampled instruments - still, IMHO the process is not clearly spelled out in the User Manual. The simple step by step process whereby a non-Garage band instrument, say an orchestral instrument, is placed in a channel replete with Midi event (notes) waiting to be played should be easy, logical and given in a simple to follow format, but is not.
What with all the talk of routes, busses, auxillary channels, GM devices, GM mixers, audio bins, libraries and audio files this Logic Pro User is confused to the max.
David, you understand that this is professional software and is not necessarily meant to be easy but is in fact designed to give the professional user as many choices as possible, that's why it's in the Pro Apps section. You WILL need to learn about buses, GM Devices, Audio Bins, Libraries...etc..etc if you intend to use Logic.
That said, you are looking in the wrong place in the channel strip.
May I offer you advice?
Go here:
http://documentation.apple.com/en/logicpro/
Open "Exploring Logic Pro" (a short PDF Document). Pay special attention to chapter 3. Also pay special attention to the included graphics of the channel strips.
I encourage you to read the whole document as it will clear up many things... even though it's a Logic 9 document.
Post back

TS4062 I am trying to install garage band onto my ipad but it says i need to be in ios7. but when i go to update my system it says I am upd to date (with ios 5). What do I do??

I am trying to install garage band onto my ipad but it says i need to be in ios7. but when i go to update my system it says I am upd to date (with ios 5). What do I do??

Download the current GarageBand version to a computer's iTunes library, go to the device, sign into the iTunes App Store with the Apple ID used to do that, and try downloading it from the list of previous purchases. If that doesn't work and you don't already have a copy of a compatible version, you can't.
(101177)

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.
Once it started, it just shows it's progress and there's no option I can find to stop the download.
Any help greatly appreciated.
Regards,
Kye.

Hi,
I am not sure whether it works, Try "Restore Sound Library" in Menu.

Can i install Garage Band Loods into Logic Pro X?

I just started using Logic Pro X. Based on the version of Garage Band on my iPhone I expected to find many more rock-oriented loops, drum kits and beats. Is this stuff only on iPhones? For example "60's Shuffle", "Bar Band Basic Drumset", "Brush Train Drumset", "Crowd Groove Drumset", "Funked Out Drumset", all this stuff and many many more loops should be in Logic Pro X Loops right?

I'm not sure how I did that, since I started with Logic 8, so my loops could be from 8, 9 or X, though I believe they do not really differ much between the versions. I believe Logic just takes the name of the folder(s) to get those dropdown names, but I'm not sure about that either. I'm also not sure if the GB loops are/were also installed if you never had GB installed, though that could well be.
So, all in all I'm pretty unsure, it seems.

How do i convert a garage band recording into a wav file?

I made a recording in Garage Band that I need upload to a particular website, but it only accepts wav files.
Supported WAV formats:
- Mono is preferable to stereo, but stereo is accepted.
- 8000Hz, 16-bit, PCM, mono is the recommended format.
- 44,100Hz, 16-bit, PCM is also supported
- mp3 files are NOT supported
Does anyone know how to do this? I went on You Tube which says to send to iTunes selecting WAV, but it does not seem to be working. Any suggestions?
Andrea

GB doesn't export .wav files. Sharet he file to disk as an uncompressed AIFF file, then use iTunes to convert it to .wav. (Go to iTunes' import settings and select .wav.)

HT5537 How do you import/export garage band projects using the latest version of iTunes when there is no apps in the left column to select garageband?

I am perfectly aware of how to do this using the old version of itunes.
however i just got a new macbook pro retina... and it came with the latest version of itunes.
and i was trying to import/export garage band files between my ipad and mac via itunes.
and the option for apps, that is usually on the left side where you can then select garage band from in itunes, isnt there in the new version of itunes.
has anyone got a work around for this?
thanks.
nic

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

Having trouble installing Garage Band

Alright. I originally installed, or at least thought I did, Garage Band when I went to my System Preferences and clicked on Update Software. Garage Band was one of several Software applications that I updated at that time. However, when I went back into Garage Band (that is, after I installed it) I tried clicking on one of the drum loops but nothing came up. In fact, I was asked to Download Garage Band again. I clicked on the Download button but when my computer did a serch for latest updates it brought up only two applications neither of which were Garage Band. I quit that and restarted my computer - believing that to be the problem. When I went back into Garage Band, once again no drum loops could be chosen. What happen was I clicked on a drum loop and a screen popped up saying that my computer already has downloaded Garage Band (or some such message similar to this), yet I am unable to use any of the loops. Does anyone have any suggestions other than putting in DVD #2 ('cause I have no disks other than the Mac OS X disks)?
Thank you

Does anyone have any suggestions other than putting in DVD #2 ('cause I have no disks other than the Mac OS X disks)?
well, no, because that IS the solution, and those ARE the discs you use.

How do I export my garage band song onto my iTunes?

So I created a remix on garage band on my ipad and would like to have it in my music on my ipad. How do I do that? I can use my laptop if need be and it's on my iPad mini. Please help quickly.

Share the finished GarageBand song to iTunes and sync the iPad with your mac. Then you can sync the song from iTunes on your Mac to the Music.app on the iPad. See this help page: http://help.apple.com/garageband/ipad/2.0/index.html#chs39284d66
Send a GarageBand song to iTunes
Tap My Songs, then tap Select.
Tap the song you want to send, then tap the Action button .
Tap Share Song via iTunes.
Do one of the following:
To send the song as a GarageBand song, tap GarageBand.
To send the song as an audio file, tap iTunes, then tap Share.
After you tap the iTunes icon, you can choose the quality of the file GarageBand sends to iTunes. You can also add artist, composer, and title information that appears in iTunes.
Sync your iPad with your computer.In iTunes, the exported song appears in the Documents list in the File Sharing area when GarageBand is selected.
Do one of the following:
Drag the song from the GarageBand Documents list to the Finder.
Click Save As, navigate to the location where you want to save the song, then click Save.
You can open the GarageBand song in GarageBand on your Mac, or play the audio file in iTunes (or any compatible audio application) on your computer. GarageBand songs cannot be opened on a Windows computer.
You could also mail the song to your mac,
Send a GarageBand song via email
Tap My Songs, then tap the Action button .
Tap Share Song via Mail.
Enter the artist, composer, and album name if you wish, then tap Email.An email message appears, with the song as an attachment in AAC format.
Tap the To, Cc/Bcc, and Subject fields to edit the recipients and the subject of the email. To choose recipients from your Address Book, tap the Add Recipient button.
Tap the body of the email to edit the message text.
When the email is ready, tap Send in the upper-right corner to send it.You can’t send the email until you add at least one recipient.

How to contact Apple for Garage Band iPad bugs?

I looked around a little bit, but couldn't find a place to report Garage Band bugs or contact Apple support for Garage Band iPad. I wanted to notify Apple of the problem that bluetooth audio output in Garage Band does not work. (Yes I am aware of the latency, however, this would still appear to be a bug in Garage Band if a user has explicitly set audio output to bluetooth. Not all applications fo Garage Band require zero latency.)

kirkegrd wrote:
a place to report Garage Band bugs
http://www.bulletsandbones.com/GB/GBFAQ.html#sendfeedback
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to edit audio in garage band

Trying to edit pure voice recordings in Garage Band (for voice over etc work).
I must be missing something obvious, but I seem to delete the entire track when I try.
An idiot's guide please?

cadburys wrote:
I seem to delete the entire track when I try [to cut parts out of a region].
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to I access a garage band song

My student has created a song in garage band that we would like to use in our iMovie. I had the student share his song with iTunes, but now can't find the song in my iTunes?

I assume your student shared his song from GarageBand to iTunes and then put it into a playlist and enabled the sharing of this playlist in the iTunes Preferences -> Sharing Tab?
Then - in your iTunes - you need to enable the display of "Shared Libraries" in the "Show" part of the "general" iTunes preferences. You should see your studen's iTunes Library in the "Shared" section of your Library inspector.
RegardsLéonie

How can i install garage band in my iPad with ios4

Ios4 seems to work beter with Io Dock alesis than ios5
i have a ios4 iPad 2. But the gband donwload reagires iOS 5!!
How can i solve this

No solution. iOS 5 or above is required to run Garageband application on Apple devices.

How do I de-install Garage Band?

Similar Messages

Maybe you are looking for