How do I deactivate photoshop elements 10? There is no option in the help menu.

My computer is in need of a reinstall of the software (getting very glitchy.) I can't find the deactivate option in Photoshop Elements 10.
Any suggestions?

I found it. I was looking on the wrong screen. Thank you.
Sent from my PDA. Please excuse errors from Fat Fingers and Auto-correct. [(;<{)}  

Similar Messages

  • How can I deactivate Photoshop Elements 12 on my current computer so that I can re-install it on a new computer ?

    Photoshop Elements 12 is currently installed on a a HP Pavilion dv6 laptop with Windows 7 64 bits and I wish to deactivate it in order to re-install it on a much bigger/powerful machine.
    I found no indication whatsoever on Adobe site for this question. The chain of questions on the site keeps taking me round and round until I reached this forum, which is where I started from !!!
    Can somebody tell me how this can be done ?
    Please DO NOT tell me to follow the path of questions until I get somewhere : this is juest what I have been doing for half an hour !!!
    dominiquea47010810

    Many thanks Brian !
    Quick reply, simple process (two clicks). Why is it so difficult to find the answer ? Too simple ?
    As a matter of fact it is a question of vocabulary : “sign out” and “deactivate” is NOT AT ALL  the same thing (I’ve been  for many years an editor of English versions of international standards and regulations, and happen to know what words mean ). All the more as I have just discovered in the “Uninstall” process that the word “deactivate” is used https://helpx.adobe.com/photoshop-elements/kb/uninstall-premiere-elements-photoshop-elemen ts.html
    In French (my language), the Help menu reads “Deconnecter” which means something like “exit” or “sign out”. For me it meant either “leave the programm” or “disconnect from the help service”. Anyhow, it’s not an option you would use not knowing what the result would be : there is no suspension point on that line.
    And the Help answer on Adobe’s site (in French) reads :
    “Si vous souhaitez installer le logiciel sur un troisième ordinateur, désactivez-le sur l’ordinateur sur lequel vous n’allez plus l’utiliser. Ensuite, activez le logiciel sur le nouvel ordinateur.”
    It does not use the word in the menu (déconnecter = disconnect).
    Approximations like this could be a matter of life and death . In a french movie dramatizing the war in Algeria “L’honneur d’un Capitaine”, soldiers uphill in the mountains radio their captain – in the valley - to let him know they have captured the man they were looking for. He just says “Descendez-le”, which means “bring him down” or “Shoot him”. He meant of course “Bring him down”. The man was shot to death.
    It looks like no one on the forum know the real answer. Do you think you could help correct this ? A simple phrase like : “check (or look up) uninstall process” would do.
    Regards
    Dominique

  • How can I deactivate Photoshop Elements 13 to move the license to a new computer?

    How can I deactivate Photoshop Elements 13 to move the license to a new computer?

    From Expert mode use the menu:
    Help >> Sign-Out

  • I can't get my iMac to accept a CD/DVD disc.  It acts like there's already one in there but there isn't.  Tried the help menu but nothing worked.Suggestions?

    I can't get my iMac to accept a CD/DVD disc.  It acts like there's already one in there but there isn't.  Tried the help menu but nothing worked.Suggestions?

    Thank you, Allen.  My iMac is a 2009.  I can't shine a light into the disc drive slot as it has a built in whisker cover that prevents anything from getting in.  It will accept a disc half way in before the disc reaches a springy obstruction.
    About 3 weeks ago, the computer locked up so I inserted the OS disc and reinstalled it.  In general, the computer works just like it used to but we've had a few quirks appear; for example, this is one of them.  Also, we can't figure out how to keep from having to sign-in when we turn the computer on.  Also, we can't access our one on-line account anymore.  Very strange.
    Dave
    P.S.:  Just realized I mis-spelled your name.  Sorry Allan.
    Message was edited by: DTabbert

  • Are these suggestions speficic to the Windows version of Firefox? Because on my Mac version (31.0) there is no "options" in the Tool menu

    Are these suggestions speficic to the Windows version of Firefox? Because on my Mac version (31.0) there is no "options" in the Tool menu.
    I'm trying to figure out why Firefox has no spellcheck. I suspect it needs dictionaries installed, but it's a bit of a mystery. I had to reste FF as it kept crashing after I updated to V31.0

    Yes Options is for Windows.
    On Mac you use "Firefox > Preferences" or the Preferences button in the "3-bar" Firefox menu button drop-down list.
    You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.
    At least one dictionary should be installed and have a check mark to indicate that it is selected.
    *Open the "Add Dictionaries" link to install a dictionary if you do not have one.
    *Make sure that [X] "Check Spelling" in the right-click context menu is check-marked.
    You can enable or disable spell checking globally:
    *Firefox > Preferences > Advanced : General: Browsing: "Check my spelling as I type"
    You can look here for dictionaries:
    *https://addons.mozilla.org/firefox/language-tools/
    Were you able to stop the crashes?

  • I can't find the Preferences option in the help menu on Photoshop.  Can you tell me where it is?

    My problem is that I can't find the Preferences option in the help menu on Photoshop.  Can you tell me where it is?

    For Windows, it's under the Edit menu or Ctrl k.

  • HT1420 I have successfully deauthorised my old computer but am unable to authorise my new machine.  I have followed the instructions but there is no option on the store menu to 'Authorise this computer'. Please help!

    I have successfully deauthorised my old computer but a unable to authorise my new machine.  I have followed the instructions but there is no option on the store menu to 'Authorise this computer'.  Please help!

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • How can I deactivate Photoshop Elements 5.0 on hard drive that will not boot?

    I have Elements 5.0 loaded on a hard drive which will no longer boot. I have a new hard drive and can access the old drive as an extra internal hard drive. I cannot use Photoshop, so I was thinking I need to deactivate the copy loaded on the old hard drive and reload it on the new hard drive. Is this the best solution? If so, how do I deactivate? When I start up the editor, it does not have an option for deactivating as I read about in another post. Under the help menu, there is a grayed out option for Registration. After a few seconds, a window appears saying there is a problem with my serial number and the application closes.  Also, I would like to load Photoshop on a laptop later, so I do not want to waste one of my allowable loads. I would appreciate any help.

    Yes, as long as you don't have it on more than two computers at once you're in compliance with the license. (Back in the days of PSE 5 adobe worked more on the honor system.)

  • How do I deactivate Photoshop Elements 9 from a dead computer?

    Hello,
    I recently got a new computer to replace my old one which stopped working. I had Photoshop Elements 9 installed on the old computer and used it often, so I installed it on my new computer. However, it told me that the serial number had been used for 2 computers already (my old computer and my dad's computer) and that I needed to deactivate the old one before I can activate this one. This is impossible because the old computer can't be used anymore.
    Is there some way the serial number on my old computer could be deactivated online?
    Many thanks,
    -Mike

    Hello, I have a problem with Activation. My computer was broken and I had my Photoshop Elements 9 installed in it. Now I want to activate my PSP ELements 9 on new computer.  It says "Activation limit reached for Adobe Photoshop Elements 9. " And it wants me to deactivate my PSP ELements on the broken computer or a new serial number. As far as I cannot deactivate it on the broken computer, I am writing you to ask for help. I am not the US, I am Slovak. What can I do to use my PSP ELements 9 now ??? 
    Thanks so much for your help in advance.
    Riso

  • How do I deactivate Photoshop Elements on 2 computers that don't work?

    I installed Photoshop Elements on 2 computers that no longer work.  How do I deactivate them so I can install the software on my new computer?

    By going to this link <http://helpx.adobe.com/contact.html> and following the online instructions.
    Both computers gone busted at the same time?  You will be asked this question so be prepared for the answer.

  • How do I deactivate Adobe Illustrator 8 with no deactivate option under the help menu?

    Please if anyone knows, thank you.

    Here's what Scott was referring to:
    Transfer an Adobe product license
    If you never bothered to register and it is not listed on your Adobe account, the paperwork is not necessary. Just be clear on that you are really using a very oldversion of AI that won't work on most contemporary computers.
    Mylenium

  • After re install osx in my imac, how to download my photoshop element 6

    after re install osx in my imac, how to download my photoshop element 6

    Unfortunately there is no known download available for PSE 6.  The oldest known is for PSE 7.

  • How can I get photoshop elements to open my nef images?

    How can I get photoshop elements to open my nef images?

    The D3200 requires at least ACR 7.1, which isn't compatible with any version of PSE prior to PSE 11, so no, you can't do this directly in PSE 9.
    You could upgrade PSE, use the Nikon software to convert the files and then open the resulting images into PSE for further editing, or download the free Adobe DNG converter to convert your NEFs to DNG files that your version of PSE can understand.

  • I am having a problem using the help menu in Adobe elements 5

    I am having a problem using the help menu in Adobe elements number five.
    When I open the help menu, the dialogue box defaults to an unreadable display font. Is there any way to change that default font? Using the help menus to find a solution is not possible for I cannot read what it is displaying.

    For product, there is an option in preferences where we can set fonts. There are two options: One is application font and other is system font. I am talking about elements 8 which I have but not sure that will solve your problem which is help related.
    Hope Help in 5th version is html which opens in Browser? Please confirm.

  • Elements 13 will not update from the help menu

    Hi, Just installed elements 13, updates does not work from the help menu, adobe application manager opens and the search for updates is continuous, just keeps searching.
    cheers
    Darryl

    Have you tried it on more than one date? Sometimes the site shuts down temporarily.
    Have you tried from both Premiere Elements and the Elements Organizer -- or even Photoshop Elements? It's all the same updates.
    Are you logged in with your Adobe ID?
    What operating system are you using?

Maybe you are looking for

  • Installation problem with Acrobat 9

    Hi, I have successfully installed all programs contained in CS4 Design Premium (German language version) except for Acrobat 9. At the end of the installation process a message pops up saying that Acrobat 9 could not be installed. I tried again but to

  • PO to Vendor

    Hi After using tcode ME9F - output message, Instead of going to vendor mailbox it is going to local printer Pl suggest me how to resolve this Thanks Raju

  • Maximum Sales Order Header Value

    Hello gurus !!!! I have a problem to solve on a Sales Order document. I search the IMG, but i didn't found something to help me. I have a lot of customers, and i have to configure the VA01 transaction, when we are typing a new Sales Order, with a lot

  • DATEADD getting a Syntax error

    I am trying to change my Promise Date when the SD.Status = 'Hold' to add 100 years so that when it sorts it it comes out at the bottom of the extract. I want the Promised Date to not change if the SD.Status is not equal to 'Hold'. The Sd.Promise_Date

  • MF50 not able to book Capacity  on Saturday and Sunday

    Dear Experts,   In MF50 planning table the  if we book  requirement on Saturday and Sunday .we are abel to book the requirement but "Not yet assigned" is gyred out system is creating a back ward scheduling to friday. In work Centre we maintained fact