How do I decide between CC and CS6?

I've been using CS6 and that's what I'm used to but I'm open to switching all my apps to CC if this is what other professionals suggest. As a Web Developer I use Photoshop, Illustrator, InDesign, Dreamweaver, etc. Latest news is CS6 is downgrading their support so I could use some guidance on this decision so I don't have both on my Mac.

Moving this discussion to the Web Design forum.

Similar Messages

  • I would like Adobe to develop a programme that sits between Lightroom and CS6

    I have Lightroom 1, 2, 3 & 4 (which I can't use at the moment because it is too slow) I also have CS3.
    I am an enthusiastic amatuer and don't need the catalogue facility in Lightroom (which can be exasperating at times) and I don't need 90% of the stuff on CS6 as I do most of my editing in Adobe Camera Raw.
    I would like to see Adobe develop a programme that sits between Lightroom and CS6 where the Lightroom  layout is kept much the same only instead of a catalogue have a browser in its place, I would also like to see the clone tool & the healing brush replaced with proper ones that work like the ones in CS6, I would also like to see an adjustment brush with a facility to invert my selection or some sort of masking, these are the tools I use most often in photoshop.
    Does anyone feel the same as me and if so how do we contact Adobe to let them know.

    Butch_M wrote:
    JimHess wrote:
    I think it's really presumptuous for anyone to dictate how someone else should handle their post processing or their file management.
    I think it is extremely presumptuous of you Mr. Hess, to confuse honest, friendly advice with an attempt to "dictate" how someone should handle their workflow ... my comment was offered as advice ... I was not handing down an edict to force anyone to do anything ....
    It's one thing to bury your head in the sand and ignore sound advice ... it's quite another to accuse others of forcing their will on someone ... just because you had a bad experience about discussing another feature in another thread ...
    I could really care less if you, the OP or anyone else doesn't adopt a sound DAM solution ... I don't have to work with your images ... but if I did, you can be assured they would be properly cataloged even if you didn't see the value in the process ...
    Whateve. 

  • Please: How to sinchronize "contacts" between pc and ipad in windows 8?

    Please: How to sinchronize "contacts" between pc and ipad in windows 8?
    Thank you.
    Ramón Mª

    http://support.apple.com/kb/HT1296
    Regards.

  • How to transfer books between ipad and pc

    How to transfer books between ipad and the windows pc using iBooks.
    REGARDS
    Nadunbat.

    make sure the pc has the most current version of i tunes for windows, then simply sync your pad.  If it asks, upload purchases.  They will be there when you need them.

  • In Mountain Lion how does OS select between ethernet and WiFi when both are activated??

    In Mountain Lion how does OS select between ethernet and WiFi when both are activated??  How does OS use "both" networl accesses??

    It will pick the highest service in the list which has an internet connection.
    To order the list, open Network System Preferences and select Set order of network services from the button below the service list.

  • How to sinck data between  production and R12 instance

    Hi,
    I am working on Oracle Apps up-gradation project.
    Now I have upgrade 11.5.7 to R12 (12.0.4) successfully. I started up-gradation task with 1 May of production data (backup) on new machine.
    Client wants to live R12 from 1/August/2009.
    Please suggest how to sinck data between production and R12 instance.
    Thanks
    Anup

    Hi,
    It is not possible to do what you propose (sync data from an 11.5.7 system to a 12.0.4 system). You will need to re-run the upgrade against the August 1 data, following your original upgrade procedures.
    Regards,
    John P.
    http://only4left.jpiwowar.com

  • How the implementation differs between BW and BI , Is BI takes more time fo

    Hi All,
    I would like to know difference between implemenation and time lines for MM as mentioned below.
    How the implementation differs between BW and BI , Is BI takes more time for implementing MM module  than on BW?
    Thanks in advanced. (Full points will be awarded)
    With Regards,
    PCR

    Hi Timo,
    Thanks for response!
    But as i read from the following url: http://docs.oracle.com/cd/E15051_01/apirefs.1111/e10653/oracle/jbo/ViewObject.html, the setQueryTimeOut(int timeOutMills), the timeOut is mentioned in milliseconds. Please correct me if I am wrong.
    and i have overriden the executeQuery() method in the View Object Impl class as shown below:
    public void executeQuery() {
    Map sessionScope = ADFContext.getCurrent().getSessionScope();
    sessionScope.put("MyQuery", this);
    try {
    super.executeQuery();
    } finally {
    sessionScope.remove("MyQuery");
    throw new JboException("Query Taking too long to respond");
    and in the JAVA class i am calling the above method like this:
    monitor.setQueryTimeOut(6);
    monitor.executeQuery();
    But the issue is:
    1. The above exception message is getting carried forward to other pages as well. I mean somewhere in the session/ADFContext this message is being saved and error comes up/pops up when i click on other tabs of the page. How do i clear this?
    2. The above exception message is coming for the first time but when i click the 'Submit' button second time, i am getting the results and also the message that 'Query is taking too long to respond'. This should not be the case, everytime it should show the same message as the timeout limit is less and the query should end without fetching the results.
    Kindly let me know how to resolve the above issues, any pointers will be helpful.
    Thanks in advance.
    Edited by: user9223904 on Nov 3, 2012 4:42 AM

  • How does the integration between CRM and SD occur

    How does the integration between CRM and SD occur?  Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
    So, if I create an order or quote in CRM how is it then created in SD?  Or do they share the same data store.
    thanks

    Hi John,
    Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
    http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
    Also you can check the best practice guide for CRM 2007 there you have plenty of information
    http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
    Hope this help,
    Regards,
    Ramon

  • How to place content between header and tabs?????

    i have header part which has to be constant through out the portal but below that i have 3 links
    like I AM employee,employer,broker..
    which has to be shown only in home page above tabs..
    how can i achieve this..
    how to place content between header and tabs..:(kindly help..

    Hi Samiran
    Try these approaches and see if that works.
    1. In the Header Section, you header footer shell and add a Header Portlet. This Header Portlet associated JSP file will have all static content in the top section. In the bottom section, add these 3 links say to right hand corner. Show these links only based on some request property like isHome. Now for the main book having Home and other page associate a BackingFile. Within this backing file in the lifecycle methods like preRender or handlePostBack, get instance of BookManager and all the pages and see which page is Active. For that active page check its page definition label which will be always unique. IF the page def label is like home_page_def (this is page def label you give for home page), then set the key value in the request property like isHome=true. By only doubt is after Book backingfile is triggered, the header has to be reloaded, because only then it can pick up the request attributes.
    2. Create a brand new portlet like HomePageLinks portlet. Make its Title Property Not Visible, and other user interface properties like NoBorder, NoTheme etc. The associated JSP will have the 3 links you mentioned right aligned. You can use css styles to make it right etc. Now drop this portlet in the Header Shell area. You already have HeaderPortlet in the top, below that you will have this HomePageLinks portlet. Now associate a backing file for this Portlet to show, only if the Books current active page is Home page by comparing the def label etc as mentioned above.
    In both scenarios, only concern is when we click on different Pages, the entire portal has to be rendered right from the Top Header. Only then the backing file will set the key, and the HomePageLinks portlet can show or hide accordingly.
    Try firing an Event when the Home page is clicked. This listener for this Event can be the HomePageLinks Portlet. I guess Event mechanism should work irrespective of where the portlet is placed. In the event listner, see if you can show/hide this portlet.
    The only challenge is Header section needs to reloaded everytime you click on a Tab.
    Start putting some backing files and System.out.printlns to see if the Header section gets reloaded on click on any Tabs.
    These are just my thoughts over the top of my head. Other forum users can have better alternatives or a different version of above approaches.
    Thanks
    Ravi Jegga

  • Definition of the best approach on how to do reporting between BPC and BW

    Hi,
    I need your opinion in the definition of the best approach on how to do reporting between BPC and BW.
    For example if we want to do reporting using BW on Actuals Vs Budget how should we manage this since technically BPC Model and BW InfoCube is different?
    BPC Models have the Budget and BW has the actuals, but the InfoObject that is used for Account is different. What is the best approach to do the reporting?
    Thanks in advance,
    JA

    Hi Gersh
    I already thought in that option, but the problem is the Yellow requests in the Infocube that are not used by VP.
    In the past I used Report RSAPO_CLOSE_TRANS_REQUEST_ALL3 in the virtual function module to close the requests, but now I didn't want to use VP based on function module.
    Is there any option to use data in Yellow requests in VP based on DTP?
    Best regards,
    JA

  • How to create agreement between supplier and distributor?

    Hi..
    How to create agreement between supplier and distributor?
    thanks & Regards
    Harish

    Hi,
    call TA EEDMIDESERVPROV02. Type in your service provider, an go to tab 'agreements'. Here you have the button 'Create Agreement'.
    Best regards,
    Alexander

  • How to configure SingleSignOn between GRC and BOBJ 4.1

    How to configure SingleSignOn between GRC and BOBJ 4.1?
    We have configured the System entitlement in BOBJ CMC. But didn't do anything on the GRC system.
    User can login from BOBJ to GRC with password but not with SSO.
    We haven't configured SNC . I don't this for this simple flow, we need to have SNC.
    We haven't set up the Trust certificate exchange as well between BOBJ and GRC.
    Please help us to know what are the mandatory settings need to be done to create a Relational connection for a ERP/GRC system  from BOBJ client tool IDT?
    thanks,
    Tilak

    How to configure SingleSignOn between GRC and BOBJ 4.1?
    We have configured the System entitlement in BOBJ CMC. But didn't do anything on the GRC system.
    User can login from BOBJ to GRC with password but not with SSO.
    We haven't configured SNC . I don't this for this simple flow, we need to have SNC.
    We haven't set up the Trust certificate exchange as well between BOBJ and GRC.
    Please help us to know what are the mandatory settings need to be done to create a Relational connection for a ERP/GRC system  from BOBJ client tool IDT?
    thanks,
    Tilak

  • Metadata Conflicts between LR4 and CS6

    I recently upgraded to LR4 and CS6 Extended.  I will offer start in LR4 but switch to CS6 for additional editing.  On some of my thumbnails, I will see a "!" in the upper right hand corner on the thumbnails.  When I click on the icon, a pop-up window appear stating a Metadata conflict has occurred.  The pop-up window gives you two options: Copy file data into the catalog or have the catalog overwrite the file data.  What is the best thing to do knowing you are only working between LR4 and CS6? 

    This is a known issue with the latest PS update. Refer to the pertinent thread on the PS forum.
    Mylenium

  • How do you change between 12 and 24 hour format on ipad

    how do you change between 12 and 24 hour format on ipad

    Check: Settings - General - Date & Time - 24-Hour time = On/Off

  • Need help deciding between i5 and i7 X220

    I am trying to decide between i5 and i7.  The extra money doesn't bother me and I know the i7 isn't that much faster than the i5.
    There are problems with the mSata drives for those with i7/USB3 machines but I don't plan on using mSata yet.
    Some people have had problems with their USB 3.0 ports not providing full speed.   As an aside, you can get newer USB 3.0 drivers from http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19880&keyword=usb+3.0&lang=eng .  There is also new NEC/Renesas firmware at http://www.station-drivers.com/page/nec.htm.  I have used these on my desktop with an add-on NEC/Renesas-based USB 3.0 adapter with success. 
    So the question is, are i7 owners happy with their choice or should i7 be avoided for now?
    Also, any i7 owners have their USB 3.0 working fine with a USB 3.0 hard drive?
    Are there any other issues such as heat or fan noise that are worse on the i7?

    Also, will the batty life be affected by the i7/i5 choice?

Maybe you are looking for

  • Firefox Sync recovery key is lost. No solution on the net works. Help

    I have a FF sync account. I purchased a tablet. I want to sync the tablet. During the process I am asked to provide a recovery key which I do not have. Every solution I find on the Internet is either two years old or the steps (Tools/Options/Synch/Ma

  • Error when I try to use the XMLElement(), XMLForest(), etc functions?

    I'm getting an "invalid column name" error when I try to use the xmlelement() function (and the like). Is this function only available on 9i Release 2? How do I find the SQLX functions and/or load them up for use? Hopefully someone will see this as a

  • FLVPlayback Component Volume Issue

    Hopefully someone can give me a hand with this one. I'm using the FLVPlayback component to play a movie. In the parameters, I'm setting volume to "8" where the default is "1". This works great and gives me the right volume setting, but if the user to

  • HP 1320 Printer with Airport Extreme Problem Solved with Leopard

    This may be of interest. I appear to have solved my printing problems using an Airport Extreme with an HP 1320 printer. It appears that all of the options for the printer must be specified. These options include the "Fit to Page" option in Print&Fax/

  • Mythtv with systemd problems [SOLVED]

    Anyone using mythtv with systemd?  I am using the following to get systemd to start mythbackend but it attempts to start before mysqld is fully ready and thus fails: $ cat /etc/systemd/system/mythbackend.service [Unit] Description=MythTV backend serv