How do I delete a file that says it's in use even though it isn't??!

Hi! I'm hoping someone can help me please! I'm being driven insane by a file on my Mac that I can't delete. It is a temp Illustrator file which created itself out os some tenuous necessity that I don't comprehend! When I try to send it to the trash a message comes up saying '+The operation can’t be completed because the item “AI Temp 0003560350” is in use+' even though it isn't! I have tried closing Illustrator to make doubly sure it isn't in use but it hasn't worked. I don't suppose it's very important to delete it but it's really bugging me!
Any advice much appreciated!
Thanks!

katie-cutie wrote:
I'm being driven insane by a file on my Mac that I can't delete.
have you tried restarting your Mac ?
also, see this article on how to resolve _*Trash Problems*_.
JGG

Similar Messages

  • How can i delete a file that is not working?

    Hi there. I have the following problem. Under the all files folder there are a couple of .avi files that do not appear anywhere else on my system, they are not working and they cannot be deleted or opened! When I click on them, I get a message that says delete, repair alias or ok. Click delete or ok and nothing happens, click repair and it says locate the original file. When I do so, again nothing happens!!
    Can anyone please help? I want to get rid of them as they are taking over a precious 10GB on my macbook air
    Thank you

    OK, this officially crosses over to the bizarre.
    I believe booting from the Lion recovery partition and selecting Disk Utility is next. Run "repair disk". I believe that it will find some directory corruption and should fix it.
    Here are a couple of places to go for more help, courtesy of Pondini.
    Verify your internal HD, per #6 in Using Disk Utility.
    If that doesn't help, see Where did my Disk Space go?

  • How do I delete locked files that came from a PC from my time capsule?

    I had to temporarly tansfer 200 gigabytes of files to my timecapsule as temorary storage so I could reformat a Lacie drive for a collegue. Once the files had been copied back on to the Lacie I went to delete them from my Time Capsule and it keeps on telling me I don't have permission even though I'm signed in as Admin. I've tried taking ownership of the main folder all the sub-folders and files are in but OSX won't let me.  I also can't use disk utility on the time capsule as it doesn't appear within the program. Anyone have any ideas?

    TM creates a sparsebundle owned by TM..
    When people copy files to the TC they often see a mounted directory.. and plonk files in there.. unfortunately that just happens to be TM sparsebundle.. and that is a lobster trap.. you can copy in but once a file is in.. it can never be deleted. 
    Did you try a PC? It is often a case that windows explorer can delete stuff mac cannot since permissions is kind of a unix thing.. that MS has always ignored.
    No luck then sorry but you need to wipe the TC .. you can of course save your TM backup (assuming you avoided putting the files in there).. and recover it back.. think of it as the same thing you did to the lacie in reverse.

  • HOW DO I DELETE A PAGE THAT SAYS "500 INTERAL SEVER ERROR"

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/791804]</blockquote><br>
    I really don't to much in this question but it comes when I to open something I was working on like attempting to build a web site.

    Try to clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • I can join the hotel's wifi on my iPad but the iPhone says the password is incorrect, even though it isn't.

    This is driving me nuts. They've reset the router but that hasn't helped. I've tried so many times, yet still it keeps saying incorrect password, when it just isn't. Same problem with my wife's iPhone - and both are happy to join other wifi networks. Any advice or suggestions greatly appreciated.

    Generally when attempting to join the public wifi at a hotel, it requires you to open a browser window to enter the username and password. Is that happening? Since it would affect all of your wifi settings, I'm hesitant to recommend going into Settings, General, Reset, Reset network settings, but that might be necessary. Have you tried to do a reset on the iPhone? Hold the sleep/wake and home buttons together until you see the Apple logo and then release?. See if this helps.

  • How do I delete an image that is saying "can't delete"?

    How do I delete an image that is not letting me delete?

    Thank you for replying, I just tried that a few times and no go...  ugh!  It pops up a window saying, " The item "....jpg" can't be moved to the Trash because it can't be deleted." Then it just gives me an ok button option. 

  • How to free up media files that cannot be delete u...

    I watched a couple of videos on the lumia last night. I used the browser to "stream" these by the movie player. The two movies were about 2Gb each.
    Now I have no free storage on the device. 
    I have tried going to storage check and it tells me that of the 7.2G 7.1G is use with 4.4Gb in media files. The next screen ("details") shows an "other" of 4Gb.  How do I delete those temporary files? None of the options work. I don't want to do a factory reset. This is unacceptable. And I don't want a 4GB phone, whenI paid for 8Gb. How do I delete these files and reclaim this space?

    Hi, sthomo. Welcome to the Nokia Support Discussions! Aside from Storage Checker, you may also try these applications to manage your memory:
    Freespace:
    http://www.windowsphone.com/en-us/store/app/freespace/4f350434-a5c1-40cf-8355-51f67e9a1045
    Shrink Storage:
    http://www.windowsphone.com/en-us/store/app/shrink-storage/44672108-f3f8-47df-bd19-3fe94e6c744a
    Hope this helps. Keep us posted.

  • How to - delete physical files that have been removed from library

    Hello,
    I have recently purged my iTunes library from unwanted music tracks. However, most of those tracks were located in various folders on my harddisk, thus not managed by iTunes (not being on the "My Music\Itunes" folder).
    I would now like to somehow delete those files that are still on my harddisk. I've searched if there's a script around, but with no luck. What I'd like to do is to have a script that parses my library xml file, and that compares it with the files still present on the harddisk but not listed in iTunes, so that it either generates a list of files to delete, or automatically deletes those files.
    Once this will be done, I plan to move all my remaining music to a new HDD, but before doing that I will need to clean the mess.
    Thanks in advance for your hints!
    Max
    P.S. : I thought of making a new iTunes lib, to import all, and then to somehow run a diff program to remove duplicate items. Does that makes sense ?

    Don't know of any script to do this.
    If the songs are not in iTunes (you deleted them) and they are not in the iTunes music folder, you will need to search & delete them yourself.
    You could do a Windows search the HD for all music and sort by location (In Folder), then delete everything not in the iTunes music folder.
    Or move everything not in the iTunes folder to a folder on the desktop, then sort it out from there.

  • Babylon browser hijack has taken over my firefox. I have deleted all files that I can from my hard drive, I have gone to about:config, searched for babylon and reset the settings, however it still comes back. How can I get rid of babylon?

    I have tried malwarebytes, it only found "mywebpage" bugs, but I deleted them too. I also did a scan of my hard drive and deleted five files that all contained "babylon" in them. It still comes back time and time again.

    See:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • How can I delete PDF files from my iMac desktop?

    How can I delete PDF files from my iMac desktop?

    Not on my system,When I try to dump if off in the trash it will not go. I get a message that says this file cannot be removed. I also tried going to File and clicking on Move to Trash. No dice.

  • How I can delete remained files on phone mem after...

    How I can delete remained files on phone mem after removing apps?
    Because it uses a lot of space and I can't use many apps and it says:
    "Memory card full.remove some files first."

    You cannot delete the default apps. Only those that you have added.
    Default apps wiggle, but they don't delete.

  • How do i delete Older files from the directory before create a new file?

    Hi,
    How do i delete older files in a particular directory,
    the senorio is count the number of .txt files in a directory and delete the older files if file count is more than 10. (if i add 11th file the very first file has to be deleted)
    i have written the code to count the files and delete , but it is deleting all the files instead of older file
    public class ExtensionFilter implements FilenameFilter {
      private String extension;
      public ExtensionFilter( String extension ) {
        this.extension = extension;            
      public boolean accept(File dir, String name) {
        return (name.endsWith(extension));
    public class FileUtils{
      public static void main(String args[]) throws Exception {
        FileUtils.deleteFiles("c:/countfile/", ".txt");
      public static void deleteFiles( String directory, String extension ) {
        ExtensionFilter filter = new ExtensionFilter(extension);
        File dir = new File(directory);
        String[] list = dir.list(filter);
        File file;
        if (list.length == 0) return;
        for (int i = 0; i < list.length; i++) {
          //file = new File(directory + list);
    file = new File(directory, list[i]);
    if ((list[i]).length()>=10)
         System.out.print(file + " deleted : " + file.delete());
    Thanks,
    Jamin Rosina                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    What your code is doing now, is deleting all filenames that are longer than 10 characters.
    Your problem lies in the line:
    if ((list).length()>=10)

  • HT4796 How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users?

    How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users? Having to log out just to sign in on a different user to access the files is absurd.
    Do I make all the files sharable to all the NOW users on the mac then just delete the files? Or can i erase my account that I made when starting up my new mac and then just use the one with the transferred files?
    I just dont want to have to og in and out of 2 different accounts .. Help please.         
    -Nina

    Sorry. /Users is a folder path. It would be similar to C:\Users (if that exists on Windows).
    So, in the Finder, select Computer from the Go menu.
    You'll see Macintosh HD, double-click that to open it.
    In there you'll see several folders. One is Users. That is where all the user Home folders exist. Select the other account's home folder and go to step 3.
    If you have any more confusion, please stop and ask. We'll get there.
    If you feel more comfortable, you can just log into that other account and move the files into /Users/Shared.
    Then, log into the account you wish to use and copy the files from the Shared folder and paste them into your Home folder, wherever they belong, Documents, Music, Pictures, etc.  That just takes a little more work. Transferring them into Shared, and then copying into your home sets the permissions on the files so that you won't have a problem accessing them later. The steps I provided just prevent you from having to do the double move, since you are not going to use the old account once you are done.
    Quick unix shorthand. If someone gives you a file path that begins with a /, that means the root of the hard drive, ie Macintosh HD (if you haven't renamed it). The path separator in unix is /, not \.
    A path that starts with ~/ means your Home folder, the one inside /Users named with your account name.

  • How can I delete the files .DS_store in Mac OS Yosemite?

    How can I delete the files .DS_store in Mac OS Yosemite?

    The .DS_Store file is normal. It holds certain settings related to the folder it is found in. Removing these files is futile, as they will come back, as you have observed.
    If you are seeing them on your Mac, that means you have changed settings so that your Mac is showing invisible files in the Finder. To reverse that, run the following command in the Terminal:
    defaults write com.apple.finder AppleShowAllFiles NO
    This will hide them, and any other invisible files, from view.
    If you are seeing them on a Windows machine, just ignore them. They're not doing any harm.
    If you found a Terminal command that is supposed to stop them from being created, I would be extremely skeptical as to the wisdom of running it.

  • How do I import a file that is on the desktop to iMovie?

    How do I import a file that is on the desktop to iMovie?
    I had some 8 mm film put onto DVD by yesdvd and now want to import the 3 hours of video into iMovie to edit and create a short story.
    I have created a dmg file on my desktop from the DVD but am at a loss as to what's next.  There are a bunch of files on the dmg file, including one that says video, which has a bunch of files in it that are video.  I assume I need to convert them to a format which iMovie likes.  Which one should I use, and which program should I get to do it?
    Once I have done that, where should I put the converted files and how do I work with them using iMovie?

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Maybe you are looking for

  • I had to buy a new computer and had to open a new ITunes account is there anyway of merging the 2 accounts?

    I recently had to buy a new computer and had to download ITunes again, it wouldnt let me open ity with my normal account so had to open a new one, because of this i cant back up my phone cause it doesnt says as the data is from another ITunes i will

  • I need to automate my bridge photo files through CS4 keeping Adobe RGB

    Not sure what I am doing wrong.  The files from camera are Adobe RGB and the camera raw files are marked to be Adobe RGB but when I process them through CS4 automate> run batch they are all converted to SRGB jpgs.  I want RGB.

  • Encore CS5: Trouble with 720p 59.94 fps mpeg 2 files

    Here are a number of problems i am having importing these files as assets into CS5 that i really need some help and guidance with. I have my quality presets for blu ray at 1280 x 720p  59.94 fps maximum quality. 1. I was able to successfully import a

  • Error with MapBox launcher

    Hi, We are using Installation guide MAPBOX 4.0 for SP11. In the installation guide it is mentioned that the following steps needs to be carried out for WAS 6.20 Copy the files sapjcorfc.dll and sapjco.jar into the following folder <Installation direc

  • What is PX Deq: Signal Ack?

    Other wait event consume most of resource. I make a ASH analysis and it shows the PX Deq: Signal Ack is the main reason. What is PX Deq: Signal Ack? Thank you