How do I delete a Windows partition and resize the MAC HD partition to orig

How do I delete a Windows partition and resize the MAC HD partition to original? I am new to Mac and created a very large Windows partition and need to delete it and get back. To make matters worse, I do not have a drive configured for Time Machine.
Okay, I'm stupid and jumped the gun. but can anyone help this poor fool?
Richard

Okay, after lots of Google-ing, I finally decided to follow the ru - WAEFRTFI - and found the answer in the Boot Camp Installation Setup pdf on p. 22.
Richard

Similar Messages

  • How to increase brightness in Windows 7 and for the Option sceen?

    I have an 15" early 2011 MBP with Snow Leopard and reccently installed 64-bit Windows 7 Pro using an upgrade disk I had. Apparently the backup/upgrade disk would allow me to do a clean install despite not having a previous version of windows to base it off of now that XP is no longer supported.
    I had no initial problems installing Windows and getting the bootcamp software fully updated (3.2 I believe,) but while I was in the process of updating all of my windows software things started getting messy. I managed to update some windows functions, but eventually I ran into a real problem after downloading what I believe to be a service pack (not sure which one) that was recommended by the windows updater. After downloading the update, the computer needed to be reset.
    Upon resetting the laptop, I found that the option screen that lets you choose which partition to boot into is completely black. I can tell that the display is on because the screen is somewhat brighter than when the laptop is off, but I can't see anything.
    For grins, I tried seeing if hitting the right arrow key and then enter would take me to my windows partion, which it did. The loading screen (with the windows icon approaching and illuminating) is completely fine; however, after that loading screen, the screen appears to turn off (nothing, zilch, nada.) I let it sit there for about 5 minutes or so and still had nothing. Upon hard-resetting my computer, I found that when I tried booting windows again it gave me the options to boot into safe mode. Safe mode works and gives full brightness, normal mode does not.
    I looked on the forums and saw that deleting C:\WINDOWS\SYSTEM32\DRIVERS\ATIKMDAG.SYS could fix the issue. I downloaded Paragon, mounted the bootcamp partition and removed the offending file from my mac partition.
    The option screen was still black, but the login screen appeared after the computer tried to finish patching (the service pack patch failed.) The problem then was that the screen was incredibly dim at full brightness. I had control of the brightness settings via fn+f1/f2. All it took was dimming the screen 3 notches in order to make it go completely black. I logged in and tried updating the radeon video card, reset the computer and found myself back at the off screen issue mentioned earlier after the windows loading screen.
    I have yet to check, as this process has been extremely tiring and annoying, but I think I can fix the completely dead screen by removing the driver again. I gave this long story to show what I have done so hopefully I cam get a response I
    My burning questions are:
    What do I need to do to get the screen back to full brightness when I do get my laptop to boot into windows successfully?
    How do I fix my option screen to actually show up again instead of blindly picking the partition I want to boot into?
    Are there any windows updates that I need to avoid for 64-bit windows 7? I'm guessing whatever service pack it was I downloaded is one of them.

    I don't use the search engine, so I'm afriad I don't have direct experience here.
    What I'd probably do is modify the app so that it looks at the Host data to determine which directory it should point to for graphics, formatting, etc. You could also use the obj.conf with variables to pull graphics from directories appropriately branded. Something like:
    1) Create "additional doc directory" for images
    2) Find the entry in the obj.conf that points to the new directory
    3) Modify the path to something like /path/to/$host/images
    4) Make sure you create directories like:
    /path/to/foobar.com/images/
    /path/to/www.foobar.com/images/
    /path/to/baz.com/images/
    /path/to/www.baz.com/images/

  • How to keep default Finder window size and location from Mac server

    Working in an office of three people.  Mac mini server (not sure of the OS; I think it's Snow Leopard).  We each use iMacs with Mavericks.  I have my default new Finder window set to open "customers" folder, which resides on the server, in a specific orientation.  If either of my co-workers opens "customers" and resizes that window on their machines, it retains that size & location when I open it again on my machine (as I'm sure it does to them after I "fix" my own window).
    Is there any way to change this so that one's own machine will remember the window prefs?  I mean, we're not opening on the server itself, so in my mind it should not retain the last open position, right?
    I know I could set my default folder to Home, then go to customers from the sidebar, but that almost defeats the purpose of the default folder.
    thanks in advance!!

    Hey Macdaddy,
    This happens all the time with our server at work. The server window never opens in the same place twice, and it can be annoying.
    There are third-party window management tools out there, but what I did was use a macro program called Keyboard Maestro (since I already owned it).
    Among the many things Keyboard Maestro can do is manipulate a window. I created a macro that moves it to a specific point (in my case, the upper left corner of the screen) and then resizes it to a specific width and height in pixels. I then assigned the macro a keyboard shortcut.
    Now, when I mount the server, I can use the keyboard shortcut and the window is right where I want it.
    There are other programs that just move windows, and I tried a couple. But Keyboard Maestro is more elegant in my opinion, and it does a whole lot more if you choose to go that route.
    Hope this helps.
    Andy

  • If i get a mac how do i transport my windows itunes music on the mac

    if i get on you know the rest

    iTunes: How to move your music to a new computer
    Move an iTunes library from a Windows PC to a Mac | Macworld

  • I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows.  How do I get back to Mac so I can have a choice of drives?

      I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows.  How do I get back to Mac so I can have a choice of drives?

    That doesn't sound good. It sounds like the power outage might have corrupted the partition for OS X. I would suggest booting from the Install DVD that came with your Mac while holding down the C key. Once you have selected the language start up Disk Utility from the pull down menu and repair the disk. Once you have done that then repair permissions also.
    Allan

  • I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

    I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

    SparkchaserEd wrote:
    I am getting an error when resizing the Mac HD.
    What does this error say?

  • How would i "completely" delete my Windows Partition?

    Hi all,
    After a month use of windows, i am finding it more useful to use my mac so i have made the decision to delete my windows partition.
    How would i "completely" delete my Windows Partition?
    This is what i was planning on doing (Please correct any problems):
    Disk Utility -> disk0s3 (windows) -> Erase (Zero out data)
    Is this right or is there a more efficient way of doing this, i want to "completely remove everything in the partition, which is why i have chosen to "zero out" data.
    Thanks

    OK. A normal erase doesn't actually erase the file data stored on a drive. Instead, it just removes the small amount of info that tells the file system where to find that data on the drive & frees up that space so that the file system can use it for data from other files. This is much quicker than actually overwriting the file data with some other data pattern. (There really is no such thing as an "erase" in the normal sense of "remove" or "rub out" -- all the drive can do is write something over the old data to obliterate it.)
    As long as the file system is working correctly, this is all that is needed to effectively "erase" the file, since whatever data patterns that space on the drive contains is treated as if it contained nothing. Special purpose forensic applications can recover some or all of that data by ignoring the file system & scouring the drive, looking for "orphaned" chunks of data & reassembling them into files. (It is a little bit like putting a filing cabinet back in order after someone has emptied all the pages & file folders into the trash.)
    The OS offers a set of security measures to prevent this, the simplest of which is to "zero out" the data by overwriting it with an all zero data pattern. If you are not concerned about someone recovering sensitive data "erased" from your hard drive with one of these specialized applications, you do not need to use these measures, which are time consuming.

  • How can i uninstall Windows 7 and remove the partition?

    how can i uninstall Windows 7 and remove the partition?  white unibody late 2009.  i cannot seem to find bootcamp either :/

    Open the Boot Camp Assistant in the /Applications/Utilities/ folder and use it to restore the drive to a single partition setup. If it's not there, use Pacifist to extract it from your install DVD and run the combo updater for your OS version.
    (79308)

  • How can i delete messages on iMessage and have them STAY GONE?

    How can I delete messages from my iPhone and have them STAY GONE and not have them show up on my computer or iPad? Same thing, how can I delete from any of these and have them NOT show up on the other devices? If I delete on one, it stays on the other. It's a constant circle of deleting messages? I want them gone when deleted.  Maverick. iPad4th iPhone 5
    Thanks.
    Sandy

    Hi,
    First off.
    The "Sync" as Apple calls it is only "Display on all Devices" and nothing more.
    Deleting it on one device will not delete it on another.
    On the Mac the iMessages are stored in ~/Library/Messages in file called chat.db with a couple of supporting database items alongside.
    If you "close"  or remove the chat in the list in the Messages window (the x when you mouse over the name and pic) then the iMessage will "return" as an "Aid Memoire" to the previous conversation.
    This is local on your Mac and is nothing to do with any 'sync' over the iMessages servers.
    The longest time I have experienced was using my iPhone on a hotel WiFi on a Friday evening away form home and picking up those same iMessage on Sunday evening when I turned my Mac on.
    The iMessages servers "push" the iMessages to the devices it thinks are Registered.
    However this only happens once.  When the device has the iMessages the servers stop sending it.
    This is to stop what you seem to describe - the endless attempt to delete the same iMessages.
    It is more likely you are talking about the "history" feature.
    9:56 pm      Friday; February 7, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How do you delete incorrect cover art and replace it with the correct cover art?

    How do you delete incorrect cover art and replace it with the correct cover art?

    Select the song and open the "Get Info" window (Cmd + I or File > Get Info).  Select the artwork tab.  Select the artwork and click the "Delete" button.  Use the "Add" button to select the replacement art or just drag it into the window.  Click "OK" to save your changes.

  • Will upgrading from Lion to Mountain Lion delete my Windows partition (bootcamp)?

    On my other computer I upgraded from Snow Leopard to Mountain Lion, and the windows vista partition was completely deleted.  I was wondering if I upgrade from Lion to Mountain Lion on my other mac with Windows 7 will it be affected, or in other words, is Mountain Lion Bootcamp compatable with WIndows 7. Should I save it to an external hard drive?
    Thanks!

    No OS X installer deletes a Windows partition automatically. There is no reason for a Mountain Lion installer to do so when upgrading from Lion.
    Nevertheless, having backups is always a good idea no matter what. If you don't have them, then this is a good time for them.

  • My emails do not go - they exit outbox and go to recovered. How can I delete my Icloud account and just use gmail.

    My emails go from outbox into I cloud recovered section. I have gmail too. how can I delete my icloud account and just use gmail? Speed test on wifi good.
    Any ideas please.

    Sign out of iCloud (System Preferences>iCloud)

  • How do I get my deleted emails to go to the deleted items in Outlook and not the archived folder?

    How do I get my deleted emails to go to the deleted items in Outlook and not the archived folder?

    Who is the email account provider?
    With an Apple iCloud account, there is a preference setting with the account settings on the iPhone to archive messages - save deleted messages in your Archive folder.
    I believe the same is available with a Gmail account.

  • How can I delete apps in iTunes and have that sync to my iPhone and iPad?

    How can I delete apps in iTunes and have that sync to my iPhone and iPad? I don't want to delete 3 separate times for each item. I just carefully chose 30-35 apps to get rid of via iTunes, hoping it would sync to my devices, only to find I have to repeat the process on my iPad, take notes, then repeat it on my iPhone. It wasn't always so tedious was it?
    Here's the "Help" I got from Apple. They even quoted my question back to me then proceeded to answer with something very different and completely missing the point.
    I understand that you would like to delete the Apps. I know how eager you are to get the required information and I will be happy to assist you.
    You can remove individual songs, audiobooks, and videos from your iPod, iPhone, or iPad. Removing an item from your device doesn't delete it from your iTunes library.
    To remove items from a device other than an iPod shuffle, first make sure that iTunes is set up to manually manage items.
    1. Connect your iPod, iPhone, or iPad to your computer.
    2. When the iPod, iPhone, or iPad icon appears in iTunes, select it.
    3. Unless your device is an iPod shuffle, click the Summary tab and make sure "Manually manage music and videos" or "Manually manage music" is selected.
    4. If the disclosure triangle to the left of your iPod, iPhone, or iPad (below Devices) is closed, click the triangle so that you can see the device's contents.
    5. Select the item you want to delete and press the Delete key.
    This was not helpful in any way and I am still unable to delete apps on my devices in a global, iTunes based way. Each device still requires its own independent process.

    Match was off.  I made all of the changes and then went through the "Turn on iTunes Match" option.  I now have deleted some tracks, edited the Metadata in CDDA, and then added it back.  This worked fine, but it is not a good solution.
    I just tried making some edits and use the "Update iTunes Match" and that seemed to work.  It looks like the real answer is that Match must be up and operational, then you can make changes and run the Update to incorporate the changes.  However, if Match has a problem then Signing Out and back in to your store account and going through the process of Turning On Match (were you get the questions, "Add this Computer to Match" will overwrite any changes. 
    Since this relies on the stability of iTunes, I won't be making a lot of changes between updates.

  • How can i delete all my photos and music easily?

    how can i delete all my photos and music easily?
    I have changed to a new macbook and given the old one to my partner (generous?) and want to delete a lot of my stuff on the old one (iphoto and itunes) without losing safari and mail data, settings etc so I dont want to a clean reinstall.
    Jo

    Jhunior wrote:
    HI
    I need help
    Please
    But i need talk too you, i don´t speck english very well, I´m a Brazilian Guy
    Then post your question in your native language.  This is a multi-lingual forum.

Maybe you are looking for

  • How to remove the stock from 916 -storage type

    Hi experts, In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants How to remove the stock? Regards vr

  • Deleting multiple items in one click

    Hi Guys My iTunes has been reset and has for some reason added all the songs on my computer twice = about 120GB when it should only be 60GB. I'm sure there used to be a way to delete multiple items in one click but the only way I can seem to do it is

  • Problems using Mac Mini with a Sharp 60" led 1080p

    My Mac Mini is connected to a Sharp LED 60 "and I use the VGA input but when I use 1080p resolution, then the text becomes blurred and chopped up. Why does this happen?

  • MAC Premiere Issue

    I use premiere from time to time on my mac. The last time I tried to launch the application it came up all grayed out and no longer operational. It is like it has some sort of licensing issue. Has anybody run into this issue?

  • InDesign CS3 won't print – neither Acrobat

    when trying to print any file to my new epson printer WF 7515 - but the print is cancelled with this message; "pstopdffilter/pstocupsraster failed with err number 13". I have an IMac with Mac Os 10.5.8 - no problem when printing from other computers