How do i delete .lock video files on my iMac in final cut pro

I'm trying delete video files in Final Cut Pro X but they come with cant delete because of .lock how can i get rid of these?

Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(80860)

Similar Messages

  • HT4769 How to open a FULL HD video file with extension .mpeg2 in Final Cut Pro X ?

    I would like to know How to Import or Open a Video FULL HD in Final Cut Pro X or Final Cut Pro 7.0.3 . . .  I only can Open a HD video but not a FULL HD.
    May need some codec  ??? May some setup . . . 
    Whithout info , I have to RECODE a file to downgrade resolution . . . using a software like a Hand Brake to CONVERT to another extension like .mov, m4p, mkv, etc . . .
    Same problem occur with a " iMovie " software comming with OS Lion . . .
    So, why ?
    Double work . . . double file occupied in hard drive  . . .  lost time !
    Someone can Help Me ?
    Thanks,
    jbgodoy

    @daguerratype
    The Spatial Conform is one of the things I tried. Unfortunately none of its settings fixed the aspect ratio. When I choose "Fit", it simply shows it as 4:3 and leaves left and right black borders on a 16:9 timeline. When I choose "Fill", it zooms the 4:3 video and chops off the top and bottom parts.
    @Thomas Emmerich
    This is a decent workaround. Fortunately my clips are named in such a way that I can easily drop them all in the timeline and do a Command-F (Find) to search by clip name, highlight all of them in the search results, then use the Inspector to modify the properties of all the clips at once. I have to change X-scale to 133% and Spatial Conform to "Fit", and now at least it fits the 16:9 timeline properly.
    Thanks to both replies. I still hope Apple adds a way to fix the clip in the Event browser so that I don't have to do this workaround.

  • How to put video files on external drive for Final Cut Pro?

    Sorry for the stupid post, but I'm on day one of trying out final cut pro. (Tired of the very limiting imovie) I have a Sony HD video camera and a Go Pro HD camera. I want to store all my video on my 1TB external drive and edit from it. How do I set that up? I'm not up on the lingo that's used in the program, nor can I figure out how to do this so far.
    Thanks in advance.

    Hiya mate, first off no such thing as a stupid post. Better to ask if you're not sure!
    There are a lot of variables to think about, what codec you want to edit in, i.e. HDV, IMX, ProRes then there's frame rate, 25, 29.97 etc. Best practice is to work native to with the codec you've shot. i.e. if the camera is HDV ingest at HDV. If you want work at a higher codec, ingest or transcode to that codec then work with it in FCP. FCP works best with all assets at the on the same timebase and codec.
    You also have to think about disk speed and bandwidth from the external HD to Mac. FCP will only be able to handle 'x' amount of streams and layers depending on the codec.
    Anyways...bsck to the question at hand. Im not sure what camera you have shot in but if its HDV you easy set up to set your project to HDV/PAL/NTSC/25/29.97, then set your scratch location to the external drive, and then save your project (make sure you have named it correctly as the scratch location aka capture scratch folder, will be named with the same name as the project). Connect up the camera over firewire then go to log and capture (cmd+8) and ingest.
    Hope this helps!
    Regards,
    SJ

  • How do I get the compressed files from MPEG streamline into Final Cut Pro X?

    I'm on a deadline and I'm sitting here stuck. Any help would be greatly appreciated.
    thanks

    Streamclip is a converter tool.
    FCPX is an editor.
    so, what do you want to accomplish? or, is the question?
    If you like to convert any sources, choose in Streamclips' many export settings the codecs corresponding to your Project settings in FCPX, probably proRes + resolution + framerate ....

  • How do I achieve a high quality PAL SD DVD from Final Cut Pro?

    From a PMW-EX1 camera file edited in Final Cut Pro I am unable to produce a high quality PAL SD DVD using compressor and DVD Studio Pro (tried multiple combinations).
    Using Final cut pro and Magic iDVD I can achieve a high quality SD DVD with no changes in export.But am limited to the iDVD restrictions.
    From discussions it appears using compressor and DVD Studio pro it is not achievable, it is very frustrating that the Apple product you have to buy is not as efficient as the free one?
    If not possible then how do I access the encoded file from IDVD?
    My Final cut pro sequence settings:
    General - Aspect ratio: HDTV 1080i (16:9) 1920x1080, square and upper(Odd)
    Quicktime video settings compressor: xdcam ex 1080i50 (35 mb/s vbr)
    I

    iDVD does everything automatically for you. With DVDSP and Compressor, all steps must be done correctly. The trade off is that you achieve better quality using Compressor over iDVD.
    1. First thing to do is export your sequence as an uncompressed interlaced 25i 720 x 576 16x9 Anamorphic QT.
    2. Determine your optimal bitrate by using a bitrate calculator. Here's a good one. Remember you need to account for all video on the disc, including motion menus.
    http://www.videohelp.com/calc.htm
    3. Bring your down converted QT into Compressor and use the manual settings set your bitrate. Also encode out a Dolby digital AC3 file. These files take up less bandwidth than uncompressed audio. Also remember to match your upper fiiled dominate filed order as well in Compressor. This must be consistent throughout the export and encoding stages.
    4. bring your encoded video and audio files into DVDSP and author

  • How can I delete hidden video files from the iPad?

    How can I delete hidden video files from the iPad?  These files were created on my MBA and when I changed the media type to iTunesU and then copied it to my iPad via iTunes, they did not appear.  I can see them using 3rd party software, but they don't have delete functionality.
    Thanks
    York

    Interesting note:  I can see the files when I use the search function, but when I tap either file, I return to my home screen.  The video does not open.  I can transfer the file to my MBA, and it plays fine, but I cannot figure out a way to delete them.

  • I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it.  I need the videos out of there.  I have tried every way I can think of.

    Like the title says...
    I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it.  I need the videos out of there.  I have tried every way I can think of.
    I have also tried from the iphoto side, to export the videos or share them to final cut.  I have had no luck.
    I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
    I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible.  I see this on forums and youtube videos of the older versions.
    However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
    Thank You for the Help

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • Following Media Files Are Not Optimized For Final Cut Pro

    I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
    I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
    1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
    2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
    I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
    Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
    Thank you,
    Crayton

    I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
    I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
    - I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
    - I rendered them in Premiere, then transfered the rendered AVI file to FCP.
    - When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
    - Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
    - Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
    Did that make sense?
    Thank you again,
    Crayton

  • How do I import an iMovie HD project to my new Final Cut Pro X from an external hard drive?

    how do I import an iMovie HD project to my new Final Cut Pro X from an external hard drive?

    Any replies to this one? Anyone????

  • How can we transform a video from progressive to interlaced with final cut?

    How can we transform a video from progressive (720x1080 50p) to interlaced (PAL) with final cut pro???????
    The video is taken with Sony EX3

    Hi Nick
    Sorry but your first link says +"The file you are trying to access is temporarily unavailable."+ ... but tell me, are you viewing these interlaced encodes yourself on an interlaced monitor (eg are you burning them to disc and viewing on a TV) as they are meant to be seen, or are you just playing them back from file on your (progressive) computer display?
    By the way, I did manage to download your source file and encoded it here. Looks ok to me ... in a addition to the instruction above, I also changed the Field Dominance in the Encoder > Video Format tab to Top First (it defaulted to progressive due to the progressive source file).
    Let me know if that helps
    Andy

  • How can I export a file that may use in Final Cut Pro?

    Hello friends,
    May I know how to export a file that I can use it Final Cut Pro???

    If you are talking about rendering then just use any production codec that FCP supports. You have access to them all. Use the Render Cue or create a custom preset in the Adobe Media Encoder.
    If you want to do something like dynamic link with FCP, that does not exist. You can save a PPro project as a FCP XML but any PPro effects or PPro settings unique to PPro will not come across. If you turn an After Effects project into a FCP project by going through PPro as was suggested then you will NOT get any of the effects you applied to your composition or any of the animation or anything but the footage In and Out points, opacity, rotation and position because that is all that will be moved into PPro because After Effects plug-ins are not compatible with PPro. If there is a dynamic link to an AE project in your PPro project that will not move to FCP at all. You'll get nothing.
    So the long and short of it is if you want the work that you have done in AE to show up in FCP you must render the project. I use ProRez 444 10 bit for any work I do on FCP. You can make a custom Output Module preset to help speed up the workflow.
    If you are new to AE please read this on rendering: After Effects Help | Basics of rendering and exporting
    If you are really new please go through these three tutorials: Basic Workflow

  • How import mts file from sony nx5 in final cut pro

    how import mts file from sony nx5 in final cut pro

    LOG AND TRANSFER.  I have the full workflow here:
    http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
    Make sure you are running FCP 7.0.3.  That version deals with files from the NX5 the best.  If you are on a previous version, like FCP 6....you will need to use CLIPWRAP2 from Divergentmedia.com.  As the specific AVCHD format the NX5 uses is something that FCP 6 cannot really deal with. 
    Gotta love new camera formats.

  • Video quality changes when imported into Final Cut Pro

    I have video files that I have imported from an external hard drive that were transferred from an HD camera. When viewing the footage directly from the hard drive, the quality is great. Once imported into Final Cut Pro, however, there are small "flares" (don't know how else to describe them) that appear for split seconds across the screen. The best way to describe it is if you are watching a television that has an antenna, there will be static or interferance on the image. This is barely noticable but I can't determine what would cause the decline in quality. My video settings are set to DV NTSC 48 kHz and wonder if this is the problem or if anyone knows of something else that I should change prior to importing.

    Thank you so much for your help! I am technically challenged and STRUGGLING to say the least.
    Some files are definitely H.264 and I can convert them to ProRes. I also have clips that are
    DVCPRO HD 1080p25, 1,440 x 1,080 (1,888 x 1,062)
    Linear PCM, 16 bit big-endian signed integer, 2 channels, 48000 Hz
    Current Size: 1,440 × 810 pixels
    Will I need to do anything to those as well?
    Here is the question I'm afraid to ask because I think I know the answer already. Can I simply replace the clips in my sequence with the newly compressed ProRes files or do I have to change all of the video and sequence settings and then start all over?

  • Importing AVI files from Adobe Premiere into Final Cut Pro 5

    I am editing a video for someone who captured the footage on a PC with Adobe Premiere, and he gave me a hard drive with the AVI files. Is there any way I can import them or convert them to import in Final Cut Pro 5?
    If not, would settings should he use when he exports the captured footage so that I can use it?

    Hello there,
    you can use QuickTime Player to convert the files. You need QuickTime Pro for export functionality, though.
    Step by step as follows:
    1. Open the AVI file in QT Player, select "File > Export".
    2. In the "Export:" pulldown select "Movie to QuickTime Movie".
    3. Select "Default settings" in the "Use:" pulldown.
    4. Click "Options" right to the first pulldown menu.
    5. Click "Settings" in the "Video" pane.
    6. Set Compression type to "DV/DVCPRO - NTSC".
    7. Set other options (interlaced/progressive) as needed.
    8. Click "OK".
    9. Set audio options in the "Sound" pane using the "Settings" button. (I don't have an AVI w/ sound here, so please see FCPs DV-NTSC Easy setup for approriate audio settings).
    10. Click "OK".
    11. Optionally: name the file.
    12. Click "Save".
    For the remaining files, use the "Most recent settings" option in the "Use:" pulldown of the export dialog.
    Unfortunately, while QT Player can export multiple files simultaneously, it has no batch capabilities, so you have to open and export each file by hand.
    Also, I'm not sure if QuickTime recompresses the files or just changes the container (even if the codec is the same).
    Other than that I always recommend Flip4Mac's Episode for this kinda work. This app even has a conversion preset for this. Also Episode allows for changing the container format (AVI -> QuickTime) without recompressing the frames.
    Hop this helps, Oliver

  • Copying a video from Youtube to use in Final Cut Pro

    I have an old final cut pro that I us for charities and non-profits I think it is version 5.1.7.  I have never had the money to upgrade and now I do not have any disk or material for the program, only what is on my system.  Now the question.  I have a charity that has ask me to pull a video off of Youtube that they cannot find the original.  What is the best way to copy the video from Youtube and download it to my desktop and get the best quality to use in final cut pro.  Thanks for your help.

    Just use OSX:
    Command - Shift - 3 will take a full screen snapshot
    Command - Shift - 4 will let you draw a rectangle around the portion of screen you want to copy
    Command - Control - Shift - 3 will copy the full screen to the clipboard (to be pasted in another app)
    Command - Control - Shift - 4 will copy a selectable portion of the screen to the clipboard
    Preview is set up to receive clipboard images — just select New from Clipboard from the File menu (or command - N). You can then export in a variety of formats.
    Most browsers let you right click on an image and select Save Image As... to any location on your hard drive.

Maybe you are looking for