How do i delete my system configuration?

Does anyone know how I can delete my System Configuration?? I have a MacBook Pro (Mac OSX version 10.5.8).

I Understand i need to do this in order to unlock my passcode since I don't have that option on my iPad.

Similar Messages

How can I delete a system message?

Hi,
how can I delete a system message which I have created in the Integration Builder Configuration in the menue bar "tools--> send system message?
Thanls for your help.
Regards
Stefan

Hi,
I'm not sure in which XI SP version
but when I tested it only the whole XI restart could help
but this was rather a long time ago
and since then I try not to use this system message:)
Regards,
michal

How can I delete a system?

A couple of years ago I had trouble with my HD so to play safe I installed another one and put a new system onto it. I meant to use it for a few days to make sure it worked and then delete the old system, but I forgot! I know most people say you should never have two systems but it's never given me any problems.
The troublesome drive seems Okay now so I've decided to empty it and use it as a scratch disc but I can't delete the old system folder. It says it's a read only file and belongs to the system so I'm not allowed to touch it.
Anyone know how to get rid of it?
Thanks in advance.

Okay you caught me! When I said "empty the drive and use it as a scratch disc" I meant NEARLY empty the drive. There are a couple of old programs that I use occasionally and I can't find their install discs.
Is there any other way of deleting a system folder?

How Do I Create Default System Configurations for On- and Off-Dock?

I recently purchased a T510 laptop with WIndows 7 Professional 64-bit and a Series 3 minidock. I would like two create two default system configurations (namely specifying active montiors, screen resolutions, networking options, and power management). I'd also like the laptop to detect the presence or absence of the dock and automatically switch accordingly. How can I do this? Thank you.

Dear DavidLeon65,
Good afternoon. I am sorry to learn of the difficulties you are experiencing with the bluetooth connection in your car. I know this can be frustrating. It would be my pleasure to address your bluetooth concerns.
When the bluetooth connection drops out, is the phone near you? Also, do you have Wi-Fi turned on? If so, please turn off Wi-Fi, then test. What software version do you have? For directions on how to check the software verison on your phone, click http://vz.to/SrMyDh
Thank You,
MichelleS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

I deleted the System Configuration files and now my WiFi won't work.

I've always loved Apple but ever since I upgraded to Yosemite I've been having problems with my WiFi connection, it kept dropping. So I decided to look for a solution and I found some forums that said I should go to System Configuration on Finder (Cmd+Shift+G on Finder, then write /Library/Preferences/SystemConfiguration) and that I should delete all the files there. I did just that and now I can't get online at all. Then I read in some other forums that you should only delete certain files... So you can imagine my face when I read that. I tried taking the files I deleted out of the Trash and everything but I still can't connect to the Internet wirelessly. I'm desperate!
My wireless connection used to drop every 2 minutes, and I had to go to Network Preferences, Assistant, Diagnostic, and that would fix it for another 5 minutes, 10 if I was lucky. But now I can't get online at all. I've tried everything I could think of and nothing.
I don't care if my Internet drops anymore, I just want it to go back to the way it was. I'm traveling to Argentina in a week and I need this fixed!!
If anyone can help me I would really appreciate it.

The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot into Recovery (if running 10.7 or later) by holding down the key combination command-R at the chime. If your startup volume is encrypted with FileVault, you’ll have to unlock it in Disk Utility before you can do anything with it.
Mac OS X: Gray screen appears during startup

Some how I have deleted the system Preferences application. I had already deleted everything from the trash bend before I realized system pref. was deleted. How can I recover or get it downloaded?

Somehow I have deleted the system Preferences application. I had already deleted everything from the trash bend before I realized system pref. was deleted. How can I recover or get it downloaded? Everything has been transferred to my new mac pro, but would like to give this old mac to son-in-law. Can I download system preferences back into this old mac?
Sidney Jean Bienvenu

How Restore Deleted or Missing OS X Components
A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD. However, if what you need is not there then follow the instructions below.
How to Use Pacifist to Restore Deleted or Missing OS X Components
Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
defaults write com.apple.finder AppleShowAllFiles Yes
Press RETURN.
To turn off the display of invisible files repeat the above command substituting No for Yes.
The install packages are located in the /System/Installation/ folder on the DVD.
Download the shareware utility Pacifist. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
Click on “Open Package ....” and navigate to package desired and click “Open” in the open/save window.....proceed to step 7.
Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go to Folder. In the path field enter or paste ....
/Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.)
Click on the "Go" button ..... • Drag a .pkg to Pacifist..... proceed to step 7.
The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
D. Insert your Mac OS X install disk 1 .... and open Pacifist.
1.          In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
2b.          or click the “Find” icon in the Pacifist window and type the name of the software you need.
3.          In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
4.          On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
5.          Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
          20 files were scanned. 20 of 20 files were present on the hard disk. 0 of 20 files had file permissions that did not match those specified in the package. 0 of 20 files had checksums that did not match those specified in the package.
6.          Click “close”. Go to step 7.
Extract or Install........
7.          In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
8.          If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
9.          In the next dialog, click “Extract”.
10.          If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
11.          Type in your password, click “OK”
Pacifist will begin to extract files.
12.          In steps 8/10ß.... you also have the choice to “cancel”
Notes:          Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
Stop
Leave original alone
Update .....
Default selection
Replace .... (Replace option should only be used on full install packages)

How can i get my system configuration?

hi,
i want to get my system configuration.can i get this information from BIOS.is there any possiblity available for accessing BIOS information using java....

Not without using JNI, in which case you're doing the real work in non-Java code anyway.
The question is asked a lot, please google for the answer.

How do I delete non-system ringtones?

I bought some ringtones from Verizon.
The message arrived, I saved as Ringtone per instructions (I've had the phone for 1 day now)
I saved some more than once - how do I remove the duplicates?
For that matter where do non-system ringtones 'live'?

Hello grok!
Have you checked in your music files? You should be able to see the ringtone with the rest of your music, and long press to delete.
Hope this helps!
Katie H
VZW Support
Follow us on Twitter @VZWSupport

How do I delete c:\system recovery files after I have recovered my laptop?

Recovery completed now want to remove 13 GB file C:\System Recovery Files from the laptop. I either get error message access denied or permission required. I am the owner, administrator, user for this file. Please help me get rid of it asap. Thanks in advance for your help.

Hi,
There are few options but please try the following method for C:\Windows.old folder:
http://www.kodyaz.com/articles/delete-windows-old-removal.aspx
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I delete a system file from Time Machine?

After consulting this support document, I tried to delete a Safari cache file that was captured by Sophos's Quarantine Manager as containing a common phishing hook. But it's in Library and Time Machine can't locate it. The Library folder, as you know, is typically hidden, and it wasn't there when I went to the starfield.
It's not a big threat to me, and will soon disappear from my cache, but it bugs me that I can't get to it.

Enter Time Machine from within your user Library folder. That will bring you to your user Library within Time Machine. (Your user Library is visible under the Go menu in Finder if you hold down the Option key.)

How do I delete a wireless network configuration?

How do I delete a network configuration?

Are you asking how to delete the network name and password? - you can use the Airport Utility to delete a password and not use security but you cannot delete a network name - you can only change it - but to remove the network name from showing up on the list of local networks in the area, you would have to turn off the wireless on the Express or Extreme which ever is the primary router

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

Was advised to delete system configuration file from hard drive and now computer will not start - any help would be appreciated.

Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.

Boot the MBP with the OPTION+COMMAND+R keys down. The result should be a display showing a revolving globe. By following the instructions, you will be able to reinstall the original OSX. Then you may reinstall Yosemite.
A solid Internet connection will be required.
Ciao.

How to Create a SAP R/3 system in system configuration

Hi,
i am new to EP Any body tell me how to Create a SAP R/3 system in system configuration.Thanks in advance.
Thanks
kiran.B

Hi Kiran,
To create SAP R3 System follows this steps :
in system landscape
(1)create new system
(2)select SAP system using dedicated application server
(3)give system name and id
(4)finish
(5)open system and set following properties
     Connector
     - App. Host              : r3 server name
     - Gateway Host        :
     - SAP client             :
     - SAP System Name:
     - SAP System No.    :
     - Server Port             : 3200 (Default)
     - System Type
     - give system Alias
     User Management
     - Logon Method
                  UIDPW

How to delete backend system data from GRC,GRC 10 AC

Hello experts,
we have connected multiple ECC systems to GRC by creating connectors with respect to each system and
currently we are using,now due to some reasons customer requested to delete complete data from
one of the ECC system from GRC.
we are using only access control with all components
please suggest how to delete all relevant data
from GRC system
Thanks
GRC Admin

Hi,
You can use program GRAC_DELETE_ACCESS_RULES to achieve your requirement.
2075597 - How to delete specific system from SPRO
Regards,
Madhu.

How do i delete my system configuration?

Similar Messages

Maybe you are looking for