How do I delete non-system ringtones?

I bought some ringtones from Verizon.
The message arrived, I saved as Ringtone per instructions (I've had the phone for 1 day now)
I saved some more than once - how do I remove the duplicates?
For that matter where do non-system ringtones 'live'?

Hello grok!
Have you checked in your music files? You should be able to see the ringtone with the rest of your music, and long press to delete.
Hope this helps!
Katie H
VZW Support
Follow us on Twitter @VZWSupport

Similar Messages

How can I delete a system message?

Hi,
how can I delete a system message which I have created in the Integration Builder Configuration in the menue bar "tools--> send system message?
Thanls for your help.
Regards
Stefan

Hi,
I'm not sure in which XI SP version
but when I tested it only the whole XI restart could help
but this was rather a long time ago
and since then I try not to use this system message:)
Regards,
michal

How do i delete my system configuration?

Does anyone know how I can delete my System Configuration?? I have a MacBook Pro (Mac OSX version 10.5.8).

I Understand i need to do this in order to unlock my passcode since I don't have that option on my iPad.

How to Delete Non-System State Backups in Windows 2008R2

Hello,
I am running a Windows 2008R2 server which uses Windows Server Backup to do the backups. We are using the backup-tool to create non-system state backups of the data-directories on this machine. The backup is done on a dedicated disk connected through iscsi
(to a Synology box). This backup disk has become too small and we have now replaced the Synology box with a bigger one. Here i created a new LUN again for the backup purposes.
Now for my question; The wbadmin.exe tool supplied with W2008R2 does not offer a way to delete the old backups. I know that in Win2012 (which we we also have running) I could add the new iscsi location and then (when enough backups are available on the new
target) use wbadmin.exe delete backup to delete the old non-system state backups; e.g.
wbadmin delete backup -version:08/07/2013-21:00
This (very undocumented) feature of Windows 2012 and higher works quite nice and is exactly what i am searching for on the W2008R2 machine; a way to delete the old backups (and under the hood delete the corresponding snapshots)
I've done quite a bit of research and it should be possible to do something similar in 2008 but then manually, The howto is described in the following link: http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx .
Basically it describes that you should use DiskShadow.exe to remove e.g. the oldest snapshot with a command like :
Delete shadows OLDEST \\?\Volume{7fc1871b-2e1f-11dd-a339-001e4fb7af35}
Windows Server backup (wbadmin) should then on the next run 'see' this deletion and update its list of available backups:
"You can perform the same steps manually to delete backups on demand. However, the backup catalog update cannot be done manually and it will happen instead during
the next backup."
I've done this on our box and it indeed removes the shadows from the list. However, in the Windows Backup 'dashboard' it still lists the backups as available. Also after a new backup has finished (according the the article this is when it should 'update'
its backup catalog). When I try to restore a backup from a date that i just removed it gives a nice message that this is impossible because the snapshot is not available (duh :)) ;
Unable to browse Local disk. The shadow copy of the backup stored on the backup destination cannot be found.
So it seems that the aforementioned method works; it removes the snapshot and frees diskspace, but it doesn't update the Windows Backup catalog. As a result the management tool (GUI) still lists the backups which are no longer available! How can i change
this? Is there any way to do this? I found one article which mentions that the Dashboard bases its screen on the Windows Logs and not on the actual VSS snapshots available:
http://forum.wegotserved.com/index.php/topic/23757-start-afresh-with-server-backup/ (WHS) In my situation however this seems unlikely because i don't have any logs that date back as far as my backups go.
In my opinion this is a real bug and it leaves us with a in-consequent backup schema. Does anyone have similar situations or even a solution to my problem?
Kind Regard, Martin

Hi Mandy,
Yes! I think i got my answer and I now get how windows backup works in Windows 2008 :-) It turns out that I dismissed some suggestions a bit too soon. The answer lies in the command mentioned earlier :
Wbadmin delete catalog
This command does delete all the backups from a perspective of the Windows Backup UI, but leaves the VSS snapshots intact. This means that the backups are still available, but you just can't restore them with the User Interface. In order to 'update' the
UI with the current available snapshots (which you can list with diskshadows list shadows all), you have to re-add the existing media on which the backups took place using the Wizard of the UI. It will then inform you that existing backups are available and
if you want to keep these for restore purposes. If you click 'yes', and THEN perform a backup ... All the current available backups will be shown in the User Interface :-)
So for my steps taken to change from one iscsi (iscsi1) to another (iscsi2):
- Add the 2nd iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Add more backup destinations -> iscsi2
- Remove the 1st iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Remove current backup destinations -> iscsi1
- Run some backups on the new destination. Old restore points are now still available. When enough restore points are available on the new volume iscsi2 start deleting old data from iscsi1 as follows:
- Run diskshadow
diskshadow
- list all the current snapshots
list shadows all
- remove all the snapshots of iscsi1 (repeat until all shadows are gone of iscsi1)
delete shadows oldest \\?\volume{yourvolumeid}\
- delete the windows backup catalog
wbadmin delete catalog
- Restart the windows backup UI and re-add your schedule on the new volume iscsi2. It will now ask if you want the keep the existing data for restore purposes; click yes.
- After the next backup only the backups of volume iscsi2 will be listed and everything is fine !
I Hope my post will help others with similar questions. It was quite a search before I understood the way it works. Basically as long as your VSS snapshots are still available and listed by diskshadow you still have the backups and you will be able to get
this in sync with the steps above (delete schedule and re-add originating targets containing the snapshots). After the next backup the UI will update itself.
(In my case someway along the way I lost my originating snapshots, but because I already had my new backup set it didn't bother me; It kept me from having to delete all 510 old backups :) with diskshadow)
Regard, Martin

How can I delete a system?

A couple of years ago I had trouble with my HD so to play safe I installed another one and put a new system onto it. I meant to use it for a few days to make sure it worked and then delete the old system, but I forgot! I know most people say you should never have two systems but it's never given me any problems.
The troublesome drive seems Okay now so I've decided to empty it and use it as a scratch disc but I can't delete the old system folder. It says it's a read only file and belongs to the system so I'm not allowed to touch it.
Anyone know how to get rid of it?
Thanks in advance.

Okay you caught me! When I said "empty the drive and use it as a scratch disc" I meant NEARLY empty the drive. There are a couple of old programs that I use occasionally and I can't find their install discs.
Is there any other way of deleting a system folder?

Some how I have deleted the system Preferences application. I had already deleted everything from the trash bend before I realized system pref. was deleted. How can I recover or get it downloaded?

Somehow I have deleted the system Preferences application. I had already deleted everything from the trash bend before I realized system pref. was deleted. How can I recover or get it downloaded? Everything has been transferred to my new mac pro, but would like to give this old mac to son-in-law. Can I download system preferences back into this old mac?
Sidney Jean Bienvenu

How Restore Deleted or Missing OS X Components
A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD. However, if what you need is not there then follow the instructions below.
How to Use Pacifist to Restore Deleted or Missing OS X Components
Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
defaults write com.apple.finder AppleShowAllFiles Yes
Press RETURN.
To turn off the display of invisible files repeat the above command substituting No for Yes.
The install packages are located in the /System/Installation/ folder on the DVD.
Download the shareware utility Pacifist. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
Click on “Open Package ....” and navigate to package desired and click “Open” in the open/save window.....proceed to step 7.
Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go to Folder. In the path field enter or paste ....
/Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.)
Click on the "Go" button ..... • Drag a .pkg to Pacifist..... proceed to step 7.
The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
D. Insert your Mac OS X install disk 1 .... and open Pacifist.
1.          In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
2b.          or click the “Find” icon in the Pacifist window and type the name of the software you need.
3.          In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
4.          On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
5.          Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
          20 files were scanned. 20 of 20 files were present on the hard disk. 0 of 20 files had file permissions that did not match those specified in the package. 0 of 20 files had checksums that did not match those specified in the package.
6.          Click “close”. Go to step 7.
Extract or Install........
7.          In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
8.          If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
9.          In the next dialog, click “Extract”.
10.          If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
11.          Type in your password, click “OK”
Pacifist will begin to extract files.
12.          In steps 8/10ß.... you also have the choice to “cancel”
Notes:          Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
Stop
Leave original alone
Update .....
Default selection
Replace .... (Replace option should only be used on full install packages)

How do I delete c:\system recovery files after I have recovered my laptop?

Recovery completed now want to remove 13 GB file C:\System Recovery Files from the laptop. I either get error message access denied or permission required. I am the owner, administrator, user for this file. Please help me get rid of it asap. Thanks in advance for your help.

Hi,
There are few options but please try the following method for C:\Windows.old folder:
http://www.kodyaz.com/articles/delete-windows-old-removal.aspx
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I delete a system file from Time Machine?

After consulting this support document, I tried to delete a Safari cache file that was captured by Sophos's Quarantine Manager as containing a common phishing hook. But it's in Library and Time Machine can't locate it. The Library folder, as you know, is typically hidden, and it wasn't there when I went to the starfield.
It's not a big threat to me, and will soon disappear from my cache, but it bugs me that I can't get to it.

Enter Time Machine from within your user Library folder. That will bring you to your user Library within Time Machine. (Your user Library is visible under the Go menu in Finder if you hold down the Option key.)

How to delete file systems from a Live Upgrade environment

How to delete non-critical file systems from a Live Upgrade boot environment?
Here is the situation.
I have a Sol 10 upd 3 machine with 3 disks which I intend to upgrade to Sol 10 upd 6.
Current layout
Disk 0: 16 GB:
/dev/dsk/c0t0d0s0 1.9G /
/dev/dsk/c0t0d0s1 692M /usr/openwin
/dev/dsk/c0t0d0s3 7.7G /var
/dev/dsk/c0t0d0s4 3.9G swap
/dev/dsk/c0t0d0s5 2.5G /tmp
Disk 1: 16 GB:
/dev/dsk/c0t1d0s0 7.7G /usr
/dev/dsk/c0t1d0s1 1.8G /opt
/dev/dsk/c0t1d0s3 3.2G /data1
/dev/dsk/c0t1d0s4 3.9G /data2
Disk 2: 33 GB:
/dev/dsk/c0t2d0s0 33G /data3
The data file systems are not in use right now, and I was thinking of
partitioning the data3 into 2 or 3 file systems and then creating
a new BE.
However, the system already has a BE (named s10) and that BE lists
all of the filesystems, incl the data ones.
# lufslist -n 's10'
boot environment name: s10
This boot environment is currently active.
This boot environment will be active on next system boot.
Filesystem fstype device size Mounted on Mount Options
/dev/dsk/c0t0d0s4 swap 4201703424 - -
/dev/dsk/c0t0d0s0 ufs 2098059264 / -
/dev/dsk/c0t1d0s0 ufs 8390375424 /usr -
/dev/dsk/c0t0d0s3 ufs 8390375424 /var -
/dev/dsk/c0t1d0s3 ufs 3505453056 /data1 -
/dev/dsk/c0t1d0s1 ufs 1997531136 /opt -
/dev/dsk/c0t1d0s4 ufs 4294785024 /data2 -
/dev/dsk/c0t2d0s0 ufs 36507484160 /data3 -
/dev/dsk/c0t0d0s5 ufs 2727290880 /tmp -
/dev/dsk/c0t0d0s1 ufs 770715648 /usr/openwin -
I browsed the Solaris 10 Installation Guide and the man pages
for the lu commands, but can not find how to remove the data
file systems from the BE.
How do I do a live upgrade on this system?
Thanks for your help.

Thanks for the tips.
I commented out the entries in /etc/vfstab, also had to remove the files /etc/lutab and /etc/lu/ICF.1
and then could create the Boot Environment from scratch.
I was also able to create another boot environment and copied into it,
but now I'm facing a different problem, error when trying to upgrade.
# lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
s10                        yes      yes    yes       no     -
s10u6                      yes      no     no        yes    -        Now, I have the Solaris 10 Update 6 DVD image on another machine
which shares out the directory. I mounted it on this machine,
did a lofiadm and mounted that at /cdrom.
# ls -CF /cdrom /cdrom/boot /cdrom/platform
/cdrom:
Copyright                     boot/
JDS-THIRDPARTYLICENSEREADME   installer*
License/                      platform/
Solaris_10/
/cdrom/boot:
hsfs.bootblock   sparc.miniroot
/cdrom/platform:
sun4u/   sun4us/ sun4v/Now I did luupgrade and I get this error:
# luupgrade -u -n s10u6 -s /cdrom
ERROR: The media miniroot archive does not exist </cdrom/boot/x86.miniroot>.
ERROR: Cannot unmount miniroot at </cdrom/Solaris_10/Tools/Boot>.I find it strange that this sparc machine is complaining about x86.miniroot.
BTW, the machine on which the DVD image is happens to be x86 running Sol 10.
I thought that wouldn't matter, as it is just NFS sharing a directory which has a DVD image.
What am I doing wrong?
Thanks.

How do I delete a ringtone file on my iPhone?

I created a ringtone file on garageband and sent it to itunes just to play around with it and then synced my phone. I deleted it and put another version of the same ringtone into itunes and then synced again but this time, both of the same ringtone was on my phone, but only one ringtone file was found in itunes. I deleted all my ringtones from itunes and then synced again, but that one duplicate ringtone won't go away. The file is not in my tones or music in itunes, nor is it in my ringtones folder in finder. How can I delete the ringtone off my phone?

sir i have the same problem
How do I find a downloaded file on my iPhone
iPhone 4S, iOS 8.1.2
exel file from gmail

HT1725 How do I delete credit card info there is no longer a none option

How do I delete credit card info there is no longer a none option

I am having the same problem and was wondering if you ever found out how to delete the credit card info and not just change it??

HT2623 how do i delete icloud account on my ipad when my apple ID is non active email and i don't know the password and can't reset password without active email

how do i delete icloud account on my ipad when my apple ID is non active email and i don't know the password and can't reset password without active email

If the iCloud account you are trying to delete is old ID that was later updated to change it to your current ID, you can go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now, if desired, you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How to delete backend system data from GRC,GRC 10 AC

Hello experts,
we have connected multiple ECC systems to GRC by creating connectors with respect to each system and
currently we are using,now due to some reasons customer requested to delete complete data from
one of the ECC system from GRC.
we are using only access control with all components
please suggest how to delete all relevant data
from GRC system
Thanks
GRC Admin

Hi,
You can use program GRAC_DELETE_ACCESS_RULES to achieve your requirement.
2075597 - How to delete specific system from SPRO
Regards,
Madhu.

I have deleted my system preferences from my iMac how can i get it back?

I have accidentally deleted my system preferences from my mid 2007 iMac 27 inch. I logged out of my user to see if it was in one of the others but there was just a question mark when I logged back into my user there was also a question mark is there any way I can get it back?
Thank you

Before you contact Apple you might first read the link below. It is possible to delete it and there are several suggestions as to what to do.
How to recover deleted System Preferences on Mac? - MacRumors Forums

How to connect one SAP system to Non-SAP system(Example:Window's7)?

Hi Experts,
In general, One SAP system can connect another SAP system through RFC.How to connect One SAP system to Non-SAP system(example:window's 7) and is it possible through RFC?
Thanks and Regards,
Nageswar

Hello Wolfgang Schaper,
Thank you so much for quick response.
As you told I am trying to work with BRFplus/DSM to call decision services from nonABAP systems,so I tried with RFC.But it is not possible as you told.
Please give any solution Without using Web Services, is there any ways to connect from SAP system with the Non-SAP Systems.

How do I delete non-system ringtones?

Similar Messages

Maybe you are looking for