How do I delete time capsule files and starting over

I installed a time capsule last week and backed up my HD using TM. After doing that, I started moving large movie files from my HD to an external drive, and backing up both the HD and external on the TC. Even though I have only 130 G worth of files in total, my TM is now nearing 400G, because it backed up several times during the process of transferring files. I tried to delete the TM backup, and even tried deleting everything on the TC using disk utility, but I can't get that memory back. I have not tried zeroing out the drive thru disk utility. How can I just wipe out the TC and start again?

You can reformat the hard disk in the Time Capsule.
Go to Airport Utility --> Manual Setup --> Disks --> Highlight "Time Capsule Disk" on the left --> Click "Erase" on the right.
Rename the disk and select the level secure erasure. You're done and ready to begin backing up again.
Hope this helps.

Similar Messages

  • How do I delete all my images and start over?

    How do I delete all my images and start again?
    I have not been able to transfer chosen images to specific folder and now there are too many misplaced pieces.  Please help!

    Wrong software... I am having trouble with Lightroom 5.  Since my images are still on my memory card, I should be able to delete that which I have on Lightroom 5 because it is in a scrambled mess and I cannot export the images to folders.  I want to start over.
    Carole

  • How do I delete everything in Iphoto and start over

    I have given up trying to fix my library. I would like to delete everything in old library and hope I can reimport my pictures from disks and edit then again. how do I make sure everything that was in the old library is absolutely, positively gone so that it (hopefully) doesn't mess up again? Just trash the library everywhere I can find it and start importing again?

    They were showing up when I launched IPhoto. But when trying to upload, I would browse and find pictures, then Iphoto Library. In Iphoto library, the new albums, folders, etc., were not showing up - it still had the old ones so I would have had to look at each picture in it to make sure it was the right one.
    Example: In my first Iphoto library, I had a file called wedding, one called wedding 2, etc. My pictures kept disappearing and I did what you suggested and created a new library and they showed back up. But when I organized them in the new library, I had a file called wedding and one called bridesmaids. When browsing to upload photos, my Iphoto library on the computer still had the old file names in it.
    That's why I'm wondering if I need to completely delete everything and start over.

  • HT5312 I cannot remember the password for iCloud that goes with an old email address that I used to set it up.  How do I delete the iCloud account and start over?

    I am stuck in a loop and want to delete the iCloud account I set up and start over.  How?

    If you acquired content with the old Apple ID, you also forfeit the content. Content is forever associated with the Apple ID that bought it. Apple does not transfer content from one ID to another nor does Apple merge IDs. It would be best to reacquire use of the ID than to abandon it if you have content because that is the only ID that can redownload the content or update it. Call Apple Care for your country and ask for the Account Security Team, then request help resetting the password for the account.
    Otherwise, if none of that matters, just abandon the ID and everything associated with it, delete everything from your devices and libraries. Then create a new Apple ID and start over.

  • How do you delete your itunes account and start over?

    How do you delete your itunes account that you registered with and start over?

    Delete the credit card information from the account and let it go dormant or you can contact iTunes through the expresslane and have them disable the account. To change your itunes and iphone over to a different account, first go to appleid.apple.com and create a new account then sign out of itunes on your computer and sign back in using the new account. Then, sign out of you phone's stored apple ID and sign in with your new apple ID.(Settings>Store>Tap your apple ID and choose "sign out".

  • How do I delete my itunes account and start over?

    I've had it with trying to get help with removing apps from my previous purchases.  My son downloaded some questionable apps and now they show up on all my family's devices under "Purchase".  I would like to just abandon the old account and create a new account to start over. 
    I deleted the itunes install on my PC and reinstalled thinking I could then set up a new itunes account, but then my previous account autopopulated my itunes library.  How do I stop this so I can set up another account?

    You cannot remove apps from previous purchases.
    All purchases will always be tied to the accoutn from which they were purchased.  All apps will always have to be updated using the account from which they were purchased. You would need to authorize your computers for the old account as well.
    I would not start a new account.  This generally causes problems.
    Hide the apps.
    iTunes Store: Hiding and unhiding purchases - Support - Apple

  • Each time I edit my bookmarks on one computer they get changed or duplicated by another. How can I clear my sync file and start over?

    I have 2 desktop computers, one running Windows 7, the other Ubuntu Linux. I also have a laptop running Linux Mint and a netbook for travelling dual-booting Ubuntu Linux and Windows 7. I use Firefox sync so I have my bookmarks available on all of them. The problem I'm experiencing is that sometimes I make a change to a bookmark, folder or sub-folder, like deleting, renaming or moving to another folder. Later, when I go back to either that computer or another, the bookmark or folder is back. How can I control syncing so I can force an upload of my bookmarks, then replace the bookmarks on the other computers? I was able to do that with XMarks but switched to Firefox sync a few months ago and prefer it since it doesn't ask me to log in frequently.

    How can I control syncing so I can force an upload of my bookmarks, then replace the bookmarks on the other computers? I was able to do that with XMarks but switched to Firefox sync a few months ago and prefer it since it doesn't ask me to log in frequently.
    If you have all of the data the way you want it on one computer, then create a new account in Firefox sync and add the account to the profile without Xmarks.

  • I deleted time capsule files that were old, but now they won't delete from the trash

    I deleted some time capsule files from the drive I am using for time machine.  It placed them in the trash, but it won't delete them.  It is asking if I want to delete only locked files or if I want to delete all files.  I have tried both, but they are still showing up in the trash.  It won't remove them.  Does anyone have any suggestions, as I do not know what else to do.  By the way I tried holding the option key and clicking empty trash and that did not work either.

    Are these files being used by Time Machine. If so, this is how to delete files from a Time Machine backup. You can not delete them using Finder. Mac 101: Time Machine
    Deleting data from a Time Machine backup
    To delete all backups of one or more items from a Time Machine backup, follow these steps:
    Click the Time Machine icon on your Dock to enter the Time Machine restore interface.
    Click on the item you would like to delete. Command-click to select multiple items.
    Control-click (or right click) the highlighted item(s) and select "Delete All Backups of..." from the contextual menu, or select "Delete all backups of..." from the Action Item menu.
    Authenticate with an administrator password when prompted.
    Important:  Do not use the Finder to move to the items to the Trash, or to move or delete items in your Time Machine backup repository. The folder containing your Time Machine backup repository is called "Backups.backupdb" and is located on the external disk or Time Capsule you have chosen in Time Machine preferences.

  • FireFox is refusing to properly sync and I have even deleted my sync account and started over, why is this happening?

    Up to a few weeks ago FireFox sync was working as expected, but then version 17 rolled out and I had auto update turned on, so all my PCs updated. Quickly I noticed that Roboform Lite didn't work in the new version so I decided to go back to version 16.0.2 on all my PCs to continue using Roboform. I'm confident this must have had some affect on FIrefox Sync, specifically the add-ons, as the bookmarks and others continued to sync properly.
    I've worked on it for 3 days now and after even deleting my sync account and starting from scratch I seem to still be having the same problem. It's weird though, it will begin to sync some of my add-ons, but then stop and refuse to do anymore. I only have about 10 add-ons altogether. Other times it will remove add-ons, which is even more aggravating.
    I also reset FireFox on my main computer that I had initially setup sync.
    Please help me resolve this.
    Mike

    I believe this is a bug in the new Firefox. I'm having the same problem, and so are others on this forum. My guess is just to wait till the next update for some one the bugs to be worked out. FFA was updated recently so it could be FFA's fault

  • How do I delete ALL my contacts to start over?

    I want to delete all my contacts on my iPad and start over clean and fresh.  Short of deleting them one at a time, is there a way to do it en masse?

    with your iPad connected to your computer, you manage your contacts through iTunes.  Open the device on the left side of the iTunes page and you'll be able to open contacts and manage them there.  (I'm not near my laptop, but I believe the option you click on is the first one - Information).

  • Storing and deleting time capsule files

    After reviewing a number of posts it seems partitioning the time capsule is very difficult at best. If I am using it to back up my computer and wanting to save other files to it, what happens when the disk reaches capacity? Can you delete backup files to make room for other files or will that corrupt the retrieval?

    Time Capsule is not intended for partitioning by Apple. If you need additional storage space, an additional HDD is best. However, you can delete back up files, but only do this via the Time Machine interface. Deleting files via Finder is asking for trouble.

  • Deleting Time Capsule Files

    I want to delete my backup files on my circa 2008 (1 TB) Time Capsule and start backing up fresh. I moved the sparsebundle to the trash, but it has been saying it is deleting for over 12 hours, and I continue to hear the Time Capsule working. Could it take that long to delete about 750 GB from the Time Capsule?

    Just for future reference and clarification, a Time Capsule is a piece of Apple hardware that combines a wireless router and HD. 
    Time Machine is Apple's backup software that's included with OSX.  It can back up to a Time Capsule or various other destintations.
    To erase a drive in your Mac Pro, you need to use Disk Utility.  If it can't unmount it, that means something else is trying to use it.  Turn Time Machine OFF, be sure the "Star Wars" display isn't looking at it, etc.  You might have to exclude it from Spotlight indexing, via System Prefererences > Spotlight > Privacy.
    If it still won't unmount, try Restarting your Mac, then immediately going in to Disk Utility to erase the disk.
    If all else fails, start up from your Recovery HD (if you're running Lion) or OSX Install disc and use the copy of Disk Utility there.  See the yellow box in #1 of Using Disk Utility.

  • Can't change permission on Time Capsule files and folders

    I am using my Time Capsule as a storage device that everyone on my network can access, and I also have a fairly small (~5000 songs) iTunes Library as well. This was all working fine, until I decided to try to get a second computer, beside my MacBook Pro (8,1) to connect to the iTunes Library. Suddenly strange things started happening, like the network dropping at seemingly completely random times, certain people being kicked of the network, etc. So then I thought "well maybe its because of the iTunes Library." So I did a 'Get Info' to the Library folder, named iTunes Library, and it showed this:
    This didn't seem too strange, except for the (unknown) name. I then learned (http://pondini.org/TM/E10.html) that this may actually be causing the problem, so I hit the minus button while hovering over it, only to see this:
    Now, as far as I can tell, this shouldn't be happening. So I tried it on many different computers (10.8.4, 10.6.8, 10.7.5, among others), and they all said this. Then, back on 10.8.4, I decided to try to add my name, even though it said that everyone can read and write, and it said this:
    Now I knew this was strange, since it has never, ever happened to me since OS 7. What was also strange, instead of showing the usual selection window, it asked me to type in my username, like so:
    This happened on every computer, and in every directory and every file (or at least the couple dozen I tried, including ones outside the Library folder that I had already changed permissions on before normally), so I knew something was definetly up. So of course, I turned to my friend, the Terminal. I tried doing sudo chmod 555, 755, 775, 777, and a+x, and none of them worked, again, on multiple different files and folders. Also, since I have connected the second conmputer to the Library, it seems as though the file iTunes Library.itl is no longer executable, because it looks like this:
    Also, no one but me can connect to it anymore, even though they can all see it. Any help would be greatly appreciated.
    EDIT: Sorry for the low-res images, Apple seems to have done something to them

    Verify volume failed with error Could not unmount disk (-10000)
    That could happen if there is another process that is presently accessing the volume.  I don't think it related to the volume having data corruption.  The fact that is it a "server" may be relevant.
    In the time that you have had this problem, has it been shut down and restarted? 
    You can also try restarting it with the Shift key held down.  That should do a Safe Mode startup, if an Xserve acts like a regular Mac.
    http://support.apple.com/kb/HT1564
    http://support.apple.com/kb/HT1455
    The Safe Boot will do some maintenance and tests during startup, and start up with only essential proceses running.  Try accessing that folder now.  If you can access it, you should probably save it off on another volume, such as an external drive, so that you have a current backup.
    Try running Repair Disk Permissions and Verify Disk again in Disk Utility.  Repair Disk Permissions will probably give you a lot of messages; they are usually just "informational" so don't be concerned.  However, if Verify Disk reports an error, that is a serious problem that needs to be addressed.
    Edit:  If the volume being tested is NOT the startup disk, then Repair Disk Permissions will be disabled.  It only applies when there is a system installed on that volume.

  • How can i view time capsule files on another mac

    I am trying to look at files backed up to my Time Capsule.  How do I do that?

    Perhaps someone in the Time Capsule forum might know?  Good luck.

  • How do I use Time Capsule for backup only over an existing network (or ethernet)

    Ok, first, I have been using Mac now for about 2 years and every little thing I do is much harder than advertised. I have yet to experience the mythical ease of Apple products.
    With that said, I was talked into buying this 2TB Time Capsule. Which right now seems to serve nicely as a very expensive paper weight.
    Here's what I am trying to do. I was told I could use this as a wireless backup. I have a cable modem and router in my house. I do not want to insert Time Capsule as the router. I would like to either hook it up to the existing network or have it just wireless. Whatever works best for backup use.
    I set the time capsule up to connect to an existing network. Which it did. Green light is on.
    When I select it as a backup drive in Time Machine, it works. However it does not back up. It will say Waiting to Backup and do nothing. If I select Back Up Now on Time Machine, it says it cannot find the disk.
    Is it possibly because I had used another backup disk prior and kept it? When I set the Time Capsule I selected to use both.
    I am at a loss. I am not a techie. And there are more options of use than the instructions cover.

    The problem is your method of connection I suspect.
    The TC was always designed to plug into the main router. It does not have to be in the same room but it has to be ethernet connected.
    Please post a few screenshots of the setup.. that makes it so much easier for me to work through it with you.
    Posting screenshots here is easy.. press the little camera and select the shot from finder.
    What I need is the summary page from your airport utility.. ie this one.
    Then click on edit button which I have highlighted and show me the tabs for Internet, Network and wireless. eg this is the internet. (show me the whole thing.. I have cut it off to keep it small).
    We can then work through the issues.

Maybe you are looking for

  • Using the result of a subselect in another part of the select

    Does anyone know if 9i can use the results of a subselect in a select in another part of the select. For example: select x, (select y from sometable) as ssvar, z, (select abc from someothertable where somecolumn=ssvar) from yetanothertable Anyone? We

  • Summarize prices for INVOIC02 in Message Mapping

    Hello, I have to summarize prices in the INVOIC02 IDOC. In the invoice there is header items and kit order items. The prices is found in the field BETRG in the Y_E1EDP05 segment. It is only the prices with KSCHL = IV01 that should be summarized. The

  • Appl_physical_path in PHP

    I purchased an extension from the exchange and it does not work like it should.  I contacted the author and they told me I need to have appl_physical_path enabled on my server.  We are running IIS and PHP5.  The admin told me that appl_physical_path

  • Smart form with Migo

    Hi ... I want to attach a smart form out put type with migo .. when we print that out form should displayed ... kindly help that for which program i make a Z copy and where should i attach that Zprogram and Smartform in SPRO ..... Regards Ammad

  • Query performace with "partition by" clause.

    Below is my query > select event_type, time, count(event_id) as no_of_events from ( select e.event_type, t.time , e.id as event_id from time t left outer join events e partition by (event_type) on t.time < e.end_time and (t.time + 1) > e.start_time w