How do I deliver sound from mixer into other applications without latency?

I've got a mixer delivering audio into my Thunderbolt port. I want to take the mixed audio, on channels 15 and 16, and input those into VOIP app and video recording apps. I'm using LineIn and Soundflower to accomplish this. However, LineIn is adding in a lot of latency which is a big problem for the kinds of recordings I'm doing.
What are professionals out there using to minimize this latency?

I have the same problem as Ham. I can't see the context menu for sound.
I saw that context menu in the video that Sudarshan mentioned, but it's not in my Photoshop CS6, where - like Ham experienced - i only see a context menu for Motion.
Just as Ham, i do see the sound context menu at the beginning of my work. I even got to clips in a project where one clip offers sound editing, the other doesn't.
Clips where sound can be edited appear as a blue bar. Clips where sound cannot be edit appear as a violet bar. Even if i add an MP3, it appears as a violet bar, so sound cannot be edited while motion editing is offered. I also tried to dampen the sound via the opacity control in the layer panel, but it didn't work.
I already created a complicated project out of 6 clips. I can't restart now to edit audio before anything else.
Is there any way to get audio editing (in the limited way that's part of Photoshop CS6 sometimes) in ALL clips within a project?
Thanks!

Similar Messages

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

How can I get sound from tv or stereo when watching netflix on MacBook Air?

I have my macbook air hooked up to my tv and want to watch netflix but the only sound is from my macbook. How can I get sound from other sources ie tv or stereo?

Check with Netflix for their system requirements.

How to load the data from informatica into bw & how to report the data

Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.

Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22

How do I save documents from iCloud into pages on my ipad?

HOw do I save documents from iCloud into pages using an ipad?

Where are you expecting to see "iCloud document?" Pages stores copies of your documents in iCloud but the documents appear in the Pages app. When you edit the document changes are automatically saved to iCloud. You do not go to iCloud to look for documents to open or copy.

How to import select photos from Iphoto into Adobe Elements

How to import select photos from Iphoto into Adobe Elements

If you wish to import in Elements Organizer here is the guide to help you out with all you need to use iPhoto and Organizer. http://helpx.adobe.com/elements-organizer/using/import-media-iphoto-library-mac.html
If you wish to set PSE Editor as your editor for iPhoto images then here is the help link to guide you for the same - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html
Hope it helps.
Thanks,
Garry

How do I get pics from Preview into iphoto?

How do I get pics from Preview into iphoto?

While you are viewing a photo in Preview, and want to import it into iPhoto, select the document icon in the toolbar of the preview window and drag this icon onto the iPhoto icon in the Dock or in the applications folder.
For example:

How do i import photos from iPhoto into LR5?

how do i import photos from iPhoto into LR5?

ldechiara21 wrote:
how do i import photos from iPhoto into LR5?
For a quick look, or are you trying to migrate?
If the former, then "what Jim Hess said". If the latter, then do tell...

How do I get images from Aperture into print shop for mac?

Friends,
I have Print Shop for Mac and Aperture. How do I get images from Aperture into Print Shop? I'musing managed images with previews. Is there any option besides exporting to the desktop and importing?
Thanks!
Steve

if you have previews turned on in Aperture and they're all genereated, you can simply drag-n-drop them into any application (just about). drag-n-drop is essentially the same as copy/paste as long as the application is setup to accept "drops" onto its windows.
otherwise, if you're running Leopard (10.5) as your version of Mac OS X, when you import (or whatever it is in PrintShop), you should get a file selection dialog. from here, scroll down the left-hand side bar set of icons. near the bottom is a group called "Media". click on the triangle to open the group, choose Photos, and from here you should see an Aperture icon. click this and you'll see your whole library (or at least the portion of it that you have previews generated for. select the photo you want and viola!
scott

How can I split my Dj mix into separate tracks and export the tracks

How can I split my Dj mix into separate tracks and export the tracks. I'm trying to burn my Dj mix to cd and I don't want it to be one long track.

Henryfrommo wrote:
How can I split my Dj mix into separate tracks and export the tracks.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

How do I install CS5 from CDs into my new MacBook Pro?

How do I install CS5 from CDs into my new MacBook Pro?

Buy a cheap external DVD drive, connect via USB and then install
Download CS5 Trial version from http://prodesigntools.com/all-adobe-cs5-direct-download-links.html then activate with your CS5 serial number to convert to a permanent version

How can I send sound from microphone to Bluetooth speakers?

How can I send sound from microphone to Bluetooth speakers? They work from the music app but not from an internal or external microphone. Is this a setup issue or is there a work around?

I don't know of any way to do that.

How can i stop messages from coming into my macbook air

how can i stop messages from coming into my macbook air

Open the Messages app on your MacBook Air. Click Messages > Preferences from the menu bar. Click the "Accounts" tab on top. Uncheck "Enable this account" for each account that is currently enabled.

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

How do I deliver sound from mixer into other applications without latency?

Similar Messages

Maybe you are looking for