How do I deny a user that has access

I want to deny access to a computer that has access to my network, and has the network key. Is there any way to single out a user and deny access?

If the person is already logged on to wireless and you change the password or key, they will probably be able to stay online until they disconnect from the wireless network. The next time they try to log on, they will receive an error message stating that they have entered an incorrect password.
Ideally, you would find a way to turn off the other computer for a few minutes, then change the password. Then the other computer would not be able to log onto the wireless unless they had the correct password.
I would suggest that you go with the change password / network key route. Things get a bit tricky with the other method outlined below.
"Also, how do you take a computer off the allow list? That might be the easiest way to do it."
The "allow" list is made up of computers that you DO want to be able to connect. If you leave the computer that you DON'T want to connect off the "allow" list, they will not be able to connect.
You will need to enter the MAC address of every computer that you DO want to allow to connect. Any computer that is not on this list will not be able to connect.
Open AirPort Utility, Click Manual Setup
Click the Access tab just below the row of icons
On the MAC Access Control setting, select Timed Access and follow the prompts
See pages 47-48 in the AirPort Network Guide for details
http://manuals.info.apple.com/enUS/Apple_AirPort_NetworksEarly2009.pdf

Similar Messages

How can i get the user that has created a document

I only need to know wich user has created a document(purchase order).
For example, if user SALES1 creates a purchase order(100),in wich table/field is stored this information?(that tells me that user SALES1 has created purchase order 100).
Thanks in advance!

Hi
If you look in the table of the documents there is a field called "UserSign". This user sign then matches with a column "usersign" in OUSR. In ousr it has the user names and all the other details for all the users.
Hope this helps

I have purchased a from within an app. I submit my password for the app, and then my Apple ID. I then get the following messages "Regrant failure _ please log in with the same user that has bought this app" and that is followed by "cant conn with IT _

I have purchased an item from within the app PocketBible on my iPad. However when I try to download it I am asked for my app User Name and Password and then my Apple ID and password. I give both of these. I then get a message which says Regrant failure - Please log in with the same user that has bought the app. That is then followed by Pocket Bible Alert - cannot connect to iTunes Store.
Anybody got any ideas, both what the 1st alert means and how I get round the problem please.

I had the same problem. My wife had the PocketBible on her Ipad 2 and she transferred ownership to me. I had to delete the app and reinstall it from the App store(logged in with my apple ID) and its working without a problem. I do not get those error messages when I attempt to Buy/Upgrade or Add/Remove books.

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
Thank you.

Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

How can I debug a sequence that has a subsequence is running in a separate thread?

Hi,
How can I debug a sequence that has a subsequence is running in a separate thread?
I have to have a continues check for a digital in signal to be able to terminate the sequence if a physical button is pushed.
This is running in a separate thread, but this way I cannot debug the main sequence.
Is there any workaround for this?
Thanks,
Andras

This KB might help you:
http://digital.ni.com/public.nsf/websearch/46D1E157756C37E686256CED0075E156?OpenDocument
Let me know if this does not help.
Allen P.
NI

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

Go to Finder > Preferences then select the General tab
Make sure External disks is selected.

HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer

How do i restore an ipod that has been disabled and has never been conected to itunes

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can i copy a picture that has been installed with the flash player

how can i copy a picture that has been installed using the flash player

You can't. You can take a screen cap of it, but the container doesn't allow access to the individual images used in a SWF or FLV.

HoW do I save a recording that has been sent to me via text message? Thanks

HoW do I save a recording that has been sent to me via text message? Thanks

You will need a document storage, player, or manager to save the file (DropBox, File Manager, Box, VLC, MoliPlayer for example).
To actually save the file, with it open in iMessage, tap the file icon (lower left) and select the app to save it in.

I have a user that has an issue when printing to PDF.

I have a user that has an issue when printing to PDF. When printing to PDF the PC will intermittently freeze and sometimes the print spooler will crash taking all other printers offline. A reboot clears it up for a while but then it comes back.
Acrobat 11 Pro
Windows 7 x64
Office 2010 Professional
Any help would be great! Thanks

I manage a network of 30,000 + workstations all with Acrobat Pro 10. Upon upgrading to 10.1.10, they all exhibited similar symptoms printing to the PDF printer. The problem is most obvious in IE 11, it will cause the browser to stop responding, however it seems to depend on the page being viewed. For example we can print google.com, but not yahoo.com.
And of course there is no method to roll back to 10.1.9, other than to completely remove and re-install Acrobat.
I hope this is getting addressed soon!

How can I backup a drive that has errors?

How do I backup a drive that has this error? So I can re-partition and reformat it.
Starting repair tool:
2013-01-12 16:35:55 +0800: Checking prerequisites
2013-01-12 16:35:56 +0800: Checking the partition list
2013-01-12 16:35:56 +0800: Problems were encountered during repair of the partition map
2013-01-12 16:35:56 +0800: Error: Partition map check failed because no slices were foun
I bought a new 3tb internal drive for my windows machine so I can backup an external drive which I didn't know was mac formatted. When I was trying to extend the capacity of my internal drives in wndows so it would add another 3tb I accidentally chose my exteranal drive and it changed the master boot record although I cancelled the process the drive won't mount in my mac anymore. And I get those errors in the disck utility.
The data in it are very important I was trying to backup it to my sohotank harddrive enclosure which already had a 2tb and now a 3tb installed. Any help would be appreaciated.
I'm now trying to create an image of the mac drive and had reformatted my 3tb drive to Mac just so I can place the image there. I don't know if it would work or it will jus take too long because the progress bar is not moving at all.
Thanks!

sp0radic wrote:
I'll buy software if i have to.
I prefer one full backup then incremental backups.
maybe ChronoSync can do what you want.
good luck !

How do i create a report that has drill-down with class?

How do I create a report that has drill-down levels so that I can have summary information at the top level but then view specific records at a more detailed level?

can i know ur email address.
this is my other one coding
but problem is very very slow when i 1 see my output
TABLES: proj, coep.
*&            TYPES DECLARATION                                        *
*TYPES: BEGIN OF tb_coep,
         wtgbtr TYPE coep-wtgbtr,
      END OF tb_coep.
DATA : int_proj TYPE proj OCCURS 0 WITH HEADER LINE.
DATA : int_coep TYPE coep OCCURS 0 WITH HEADER LINE.
DATA : gd_date(10). " FIELD TO STORE OUTPUT DATE
TYPES : BEGIN OF t_date,
          year(4) TYPE n,
          month(2) TYPE n,
          day(2)   TYPE n,
       END OF t_date.
*&            SELECTION-SCREEN                                         *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-001.
SELECT-OPTIONS: so_pspnr FOR proj-pspnr OBLIGATORY.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN END OF BLOCK b01.
*&            TOP-OF-PAGE                                              *
*&            fetch the data for the list                              *
SELECT * INTO int_proj FROM proj where
         pspnr in so_pspnr.
append int_proj.
CLEAR int_proj.
ENDSELECT.
SELECT * into int_coep FROM coep WHERE
         wtgbtr in so_pspnr.
append int_coep.
CLEAR int_coep.
ENDSELECT.
LOOP at int_proj.
write : / int_proj-pspnr, int_proj-post1.
ENDLOOP.
LOOP at int_coep.
write : int_coep-wtgbtr.
ENDLOOP.
Edited by: Dickson on Jul 10, 2009 10:53 AM

How do i deauthorize a pc that has a bad hard drive

How do I Deauthorize a pc that has crashed and the old drive is not accessable?

Wait until you have five authorizations and then deauthorize all.
See iTunes Store: About authorization and deauthorization.
tt2

How do I deny a user that has access

Similar Messages

Maybe you are looking for