How Do I Detemine Maximum DVD Time For A PCM Audio DVD

I have been working with my CS2 Premiere to create some auto play, audio-only DVDs that are autoplay. To clear the air, yes I know that CS4 will permit 24bit-96 kHz. For the time being 16 bit-48 kHz will suffice as it has CD quality The bonus that a DVD format provides a greater playing times. So the object is to make a PCM audio only DVD.
Here is my problem: How to get really long playing time. I know I can make high quality, 2-channel (ordinary stereo) DVD-A's up to 3 hours using Minatonka Bronze. Unfortunately, DVD-A discs are worthless as they cannot play in 90% of DVD players, but they prove the time point. I would think that one should be able to make a conventional DVD, but with the PCM sound format of that same length.
I just finished one that fit with a 103 minute, 16/48 stereo audio file of 1.11 GB size.   I also had a video file that I created using several photos. Sorry, don't have the final video file size. I erased it all from my computer. However, the final disc size was 3.754 GB. A little extrapolation suggests a maximum DVD length of 119 minutes. That with simple video and PCM audio. Now, can one make a similar DVD with 150 minutes?
I had three 48 kHz files that I created in Adobe Audion. They were 1.599, 0.911, and 0.974 GBs in size. That added up to 3.480. The playing time is about 2:30 Hours; quite a bit less than 3 hours.   I tried burning a DVD with these, audio-files-only. I checked lowest quality video, used no video, and got an Export To DVD error that I had "insufficient" space on the 4.7 GB disc! So, I used the two latter files, which added to only 1.884 GB. Premiere did not baulk, and it successfully burned a DVD that played. Then I added the 1.599 GB file, and, once again, it produced an error. This was clearly not going to work.
At this point, I realized that Audition had done what it liked to do: It had saved the 16 bit-48 kHz files as 32 bit-48 kHz! So, I went back to Audition and used EDIT to change the files to genuine 16 bit-48 kHz files. When I opened them in Premiere, Premiere reported 16 bit-48 kHz files. Their sizes were now, 0.799, 0.456, and 0.487 GB. Please note that this totals 1.742 GB. This is less than the 1.884 GB I had successfully used before.   Once again, I was getting the "insufficient" space error.
I searched the CS2 Premiere manual and its index, but cannot really find any way to calculate maximum times, or squeezing the most out. So, anybody got some ideas?
Mike

When working from DVD-Videos, this ARTICLE might be helpful - All VOB's (the container for the MPEG-2 files in a DVD-Video) are not created equally.
Most DVR's write a VOB 01, that is not up to the DVD-specs. That can create a problem for PrE (and also PrPro), and if you have issues, please do follow Neale's advice.
Good luck and welcome to the forum.
Hunt

Similar Messages

How to schedule a job occurring time for 1 1/2 hour in sql server

how to schedule a job occurring time for 1 1/2 hour in sql server

Hi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support

How can I get the elapse time for execution of a Query for a session

Hi ,
How can I get the elapse time for execution of a Query for a session?
Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
Thanks in advance.

Hi
You can use the dbms_utility.get_time tool (gives binary_integer type value).
1/ Initialize you time and date of beginning :
v_beginTime := dbms_utility.get_time ;
2/ Run you procedure...
3/ Get end-time with :
v_endTime := dbms_utility.get_time ;
4/ Thus, calculate elapsed time by difference :
v_elapsTime := v_endTime - v_beginTime ;
This will give you time elapsed in of 100th of seconds...
Then you can format you result to give correct print time.
Hope it will help you.
AL

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

How do I set the default time for calendar alerts?

How do I set the default time for calendar alerts? I always want to have an alert 15 minutes before my appointments. I don't want to have to manually set it each time I make an appointment (I just moved to iphone from a windows mobile where this was basic stuff so I apologise if this is a noob question).

I have the same issue. I've searched these forums and found lots of people who have asked this same question, but nobody who has received an answer.
About a year ago, I migrated from a Windows PC and a Blackberry (both of which had very simple default alert options) to a MacBook Pro and an iPhone and have yet to find a solution on this forum or from any of my Apple-savvy friends. Very discouraging.

How many is the maximum application pages for an iPhone?

how many is the maximum application pages for an iPhone?

Used to be 11, not sure but you can check here http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

How to get users' login logout time for user IDs for a specific date?

Dear All,
There is a case I being requested to retrieve the Userid, User Name,
User Group, User Dept, Date, Login Time, Logout Time in a specific date, for example, 21.05.2009.
How should I retrieve the information? The user want to input specific date and user group then return the details that mentioned above.
I try with SUIM->Users->By Logon Date and Password Change... but I can't specific the date that I want ...
I try with SM19 (Security Audit Log), but unfortunately in my system this is not activated.
I've seek for SAP's advise, and they say need to ask abaper to developr a report in order to get such details....
Do you guys have any other methods?
Do you guys know which tables will contain the details as mentioned above?
Best Regards,
Ken

Unfortunately without the audit log, you're going have a hard time finding this information. As mentioned, ST03N will give you some information. If your systems daily workload aggregation goes back to the date you require then you'll be able to get a list of all users who logged on that day. ST03N doesn't keep time stamps just response times.
My only idea is VERY labor intensive. If your DB admin can retrieve a save of the database from that day then table USR02 will hold a little more information for you. It will contain last login times for that day. If your system backup policy happened to have saved the contents of folder "/usr/sap/<SID>/<instance>/data" then you potentially have access to all the data you require. The stat file will have recorded every transaction that took place during that day. If that file is restored you could use program RSSTAT20 to query against it.
Good luck and turn on the audit log as it makes your life much easier!

How to determine the creation date/time for a file?

The important operating systems maintain both a creation date/time and last modified date/time for files. But in the File class there is only a lastModified() method. How does one determine the creation date/time for a file?

As far as i know, there is no way to know creation time, since it is a OS dependant information.

How to get min,max,avg time for query execution?

Dear Friends,
In AWR we are getting avg time taken to execute particular query, how can one get min,max time taken by query during number of executions.
Thanks

I would run the sql in a cursor for loop, to get a quite reasonable execution time without changing the actual execution plan:
SQL> show user;
USER is "HR"
SQL> set timing on
SQL> select count(*) from all_objects;
COUNT(*)
     55565
Elapsed: 00:00:03.91
SQL> var p_sql varchar2(200)
SQL> exec :p_sql := 'select * from all_objects'
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL> declare
2 t1 timestamp := systimestamp;
3 begin
4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
6 end;
7 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:03.53
SQL> declare
2 t1 timestamp := systimestamp;
3 begin
4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
6 end;
7 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:02.75
SQL> declare
2 t1 timestamp := systimestamp;
3 begin
4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
6 end;
7 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:02.73
SQL> declare
2 t1 timestamp := systimestamp;
3 begin
4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
6 end;
7 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:02.66
SQL> ---- alter system flush shared_pool;
SQL> declare
2 t1 timestamp := systimestamp;
3 begin
4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
6 end;
7 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:02.80
SQL> declare
2 t1 timestamp := systimestamp;
3 begin
4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
6 end;
7 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:02.64
SQL>
https://forums.oracle.com/thread/705536?start=15&tstart=0
Regards
Girish Sharma

Default maximum run time for updates

Is there a way to change the default "Max run time" for each update? In SCCM 2007 the default run time was 20 minutes per update, now it is 5 minutes. I have machines that repeatedly fail to install updates because the max time of 300 seconds was
reached.

Hi,
What is the powershell command to change the maximum run time?
Thanks.
probably this:
http://technet.microsoft.com/en-us/library/jj850138(v=sc.20).aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How i can change my face time for the green one??

how i can change my face time to the green one??

No way that I know of. It appears that Apple change the color with the last update. I tried resetting the iPod and it did not change to the old green.

Warning when making DVD...AC3, PCM audio tracks !!!

Greetings,
As soon as i start the creation of a DVD using my MPEG-2 source files (MPEG audio.. not Dolby, etc) ... Encore shows a dialog box saying :
NTSC DVD requires at least one ac3 or PCM audio track for every title set. Do you want to continue the build?
I select OK but then the DVD it produces is unreadeable in DVD players. (But my pc DVD player and the DVD burner i used can read it.)
I tried to export my MPEG-2 assets from Premiere using other audio formats but then the files are way too big. (Please don't recommand using AVI format since it is not an option for my case... for many reasons !)
Note that it use not to do that... and the DVD i was producing were readeable in regular DVD players... i did created them with Encore and was not getting the warning message.
Something must have changed somewhere....
It strange to see that i do not see this error/warning message on the Internet..(Except for one instance which doesn't provide any help.)
Thanks for any help !

From the Encore DVD 1.x FAQ Entry,
What type of Audio files can I use?
2/. In general, all MPEG audio is best avoided. Until fairly recently, MPEG Audio was a required format for PAL regions, but this has now been dropped back to an optional format instead. This means that a DVD-V disc with just MPEG audio is out of spec, and may not play back correctly on some set top players.
3/. Mandatory formats are those that all DVD players are required to be capable of playing back. Optional formats are not required to be supported, and in cheaper players are often dropped.

Dvd's for computers/.BUPfiles/calculating dvd burn time

I've now been told that my film will be watched on a computer. This means that, whatever, the film (which is a QT movie, 5.4 Go exported from FCP) needs to be encoded as MPEG-2? Computer dvd drives can read MPEG-2?
I ask the question because i did manage to create a dvd a few hours ago which i did in Toast. The one with the faded colours when i watch it on TV. But when i try to open it on my mac i get a folder containing files with extensions i don't know: .bup .vob .ifo My mac tells me i have no default application to open them. I get the same message when i try to open the same type of files when i insert the dvd of "Chicago", bought in a shop. Does this mean that the problem lies with the dvd which is not appropriate for a computer, or rather it's because i don't have the necessary program. (What is the most popular program used by Macs to read movies on dvd?)
I have to get this flippin dvd done within 4 hours, and already after trying a mini-test using Compressor, i've calculated that it will take about 4 hours to encode using Fastencode120minmpeg2. Is this normal for a 25 min film? I'm trying to install DVDSP3 right now... I'm going to try ur suggestion of putting my film directly into studio pro. Maybe the encoding will go faster than with Compressor. After that i have to burn the dvd too. With a 8x machine how long should that take? I mean how do u calculate?
If u still have time david ... or anyone else... i'd be grateful for help.
dswimmer

OK Shane. Thanks. So the problem is that i need a DVD playing application? I'm new to OSX and never really looked into it. I guess that OSX 3.9 does not come with a DVD player? I heard that VLC is one i can download free. Does anyone know if it's a good one?
As for the other question, will a mpeg2 play on a comp? And do those compression times i talked about seem normal? Maybe it's because i only have a 466Mhz processor? Is the think that took toast a long time the encoding? Or does the actual writing onto the dvd take a long time too?
Thanks for ur help
dswimmer

How to get the last update time for a table ?

I want to know the last change of the table data , for example, a record has been changed, how can i get that time?
Regards,
Lament

Hello
check the tables CDHDR & CDPOS
But the condition when u r checking the these table.for a particular field the at data element level- futhur charactestictab level we have one check box called change document it as tick
Thank u,
santhosh

How to calculate the total running time for process from sysssislog entries

Hi All,
I have the below query which gets me the log entries form the logs table when the process started/completed.
Select row_number() over (order by starttime) row_num,Substring( Substring(message, CharIndex('''',message) +1 ,Len(message)) ,0, CharIndex('''',Substring(message, CharIndex('''',message) +1 ,Len(message)))) as Description,
starttime,endtime,message
from dbo.sysssislog
where (message like 'start%' or message like 'finish%' ) and
LEFT(Substring( Substring(message, CharIndex('''',message) +1 ,Len(message)) ,0, CharIndex('''',Substring(message, CharIndex('''',message) +1 ,Len(message)))),1) between 'A' and 'Z'
order by starttime
However,I have to build a report on the top of it showing how much time that attribute/dimension/heirarchy took to execute(Ex-How much time did YearlyReview dimension take to complete).I dont have much knowledge of T-SQL and unable to figure out how to calculate
that on SQL or report level.
Could someone please assist me in getting the exact query for that?
Thanks a lot.

I get the below output(sample 20 rows) on executing this query.Also,a start process does not necessarily follow up a finished message for the same dimension as it may have been stopped or it failed.So we need to leave it as NA in case it started but dint
finish
Row_Num Description starttime endtime Message
1 PAC SC Super Type 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC SC Super Type' dimension.
2 PAC SC Super Type 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC SC Super Type' dimension.
3 Team Member Indicator 12/13/12 16:38 12/13/12 16:38 Started processing the 'Team Member Indicator' dimension.
4 Team Member Indicator 12/13/12 16:38 12/13/12 16:38 Started processing the 'Team Member Indicator' dimension.
5 PAC SC Super Type 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'PAC SC Super Type' attribute.
6 PAC SC Super Type 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'PAC SC Super Type' attribute.
7 Specialist Merger Indicator 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'Specialist Merger Indicator' attribute.
8 Specialist Merger Indicator 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'Specialist Merger Indicator' attribute.
9 YearlyReview 12/13/12 16:38 12/13/12 16:38 Started processing the 'YearlyReview' dimension.
10 YearlyReview 12/13/12 16:38 12/13/12 16:38 Started processing the 'YearlyReview' dimension.
11 PAC SC Repeat Caller 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC SC Repeat Caller' dimension.
12 PAC SC Repeat Caller 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC SC Repeat Caller' dimension.
13 Year 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'Year' attribute.
14 Year 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'Year' attribute.
15 Staffing Function 12/13/12 16:38 12/13/12 16:38 Started processing the 'Staffing Function' dimension.
16 Staffing Function 12/13/12 16:38 12/13/12 16:38 Started processing the 'Staffing Function' dimension.
17 PAC SC Repeat Caller 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'PAC SC Repeat Caller' attribute.
18 PAC SC Repeat Caller 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'PAC SC Repeat Caller' attribute.
19 PAC HV Cust 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC HV Cust' dimension.
20 PAC HV Cust 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC HV Cust' dimension.

How Do I Detemine Maximum DVD Time For A PCM Audio DVD

Similar Messages

Maybe you are looking for