How do I determine build week in serial?

I'm assuming that I have a week 13?
The shipping info doesn't say if it's 10.5 or 10.6, will probably have to wait to boot up to see that.
MBP 2.1 - 2Gb - 7200 Other OS

Thanks for the serial # . I just insured that computer on my name just in case someone steals it from me...
We are all honest here you know... but just in case do like Jim says and edit out the last numbers

Similar Messages

How Do I Find Out What Build Week My MacBook Is ?????

Hi People,
i was just wondering if anyone could help me find out what build week my macbook is as some people are having problems with there macbook and they are saying it has something to do with the build week my macbook will be a week old on the seventh of november can anyone help me please ?????

Personally, I don't place any weight on the build week of your MacBook. Mine was ordered the day they were announced and I haven't had a single issue with it whatsoever. So, bear in mind that the reports you see here are ONLY from people having problems. You're not going to see many posts here from the hundreds of thousands of folks who are not experiencing any problems with their MacBook from any week. And just worrying about your build week and waiting for something to go wrong is just not healthy behavior for an adult.
With that said, Apple doesn't like people deconstructing their serial numbers, especially here in Apple's forum, so this topic may disappear or be locked. But, the "build" year and week is in your serial number. It's probably something like X635XXX... That would make it 2006 and the 35th week.
-Doug

I'm trying to share files from my old MacBook - I'm thinking I don't have the proper version of iTunes. How do I determine the version on my new iPad 2 - 2 weeks old?

I downloaded iFlashdriveHD, but the appropriate skins don't display. App asserts I must have iTunes ver. 9.1 or later. How do I determine what I have on a two week old iPad?
Just trying to do USB transfers from my black MacBook.

App asserts I must have iTunes ver. 9.1 or later.
Where are you seeing this?
The app is not telling you that you need 9.1 on your iPad.
It does not use iTunes on the iPad for anything.
I'm trying to figure the version on my iPad.
It is the version that comes with your specific iOS firmware version.
But again, it is irrelevant to the app.
If you just got the iPad, it (the iPad) requires iTunes 10.4 on your computer.

How do I determine whether a serial number is still good?

I have two serial numbers for Final Cut Studio, and one of them has been used. How do I determine which number is still good without installing the software?

You can't. The only way you can tell if a serial number is already used is if you try to launch FCP and another machine on the same network already has FCP open with the same SN. If the other machine isn't on...or not on the network, then FCP will launch fine. This is how you can install one copy of FCP with one SN onto two machines...a tower and a laptop...but use only one at a time...per the license agreement.

How do I determine what my early termination fee will be?

My phone broke last week. The ear piece is distorted but it still works using a headset. I went into the store to see about fixing it. The don't work on LG Chocolates and I was told the replacement is an LG Extravert. I inquired about getting a new phone and using the value of the Extravert towards the new phone but was told they don't do that. I have been paying insurance on my phone for a couple years now and thought that meant I'd get a phone that was as good as my Chocolate. (removed) Since they would not work anything out with me(a 15 year customer with a family of 4 plan), I had them send me the Extravert. The store clerk said it was going to be there the next day. Apparently next day means over-the-weekend. So I was out of town the beginning of the week and didn't get to open the box until yesterday. The Extravert came incomplete with no battery nor back. It is also clown-red. The specs show it is clearly not an equal replacement for my Chocolate. Whatever... Anyway I got to argue with 2 Verizon reps on the phone about how it was not an equivalent phone for about an hour at one point being told that i had the option of selling the Extravert back to them for, much to my chagrin, $1. I pay $6 a month to insure my phone and they will send me a phone they value at $1!. I asked how much they would sell me the Extravert for and the rep said around $175! So you can probably see why I am not a happy customer. 15 years of loyalty and they can't do a thing to help me and don't seem to care. I realize it is not the person I talk to on the phones company and I am just one person so I am small potatoes. Again, whatever... So after the frustration of the last week, I have decided I need to end my relationship here and move on. So after venting, how does Verizon determine the early termination fee? Thanks in advance for your responses and a big no-thanks to Dorothy (removed) who was one of the exasperating folks I got to argue with for an hour yesterday...
Edited as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

You can't cancel service online. However, if you are moving to another carrier, start service with them and port your number - that will initiate the cancellation from Verizon. You also have to have an active line of service to port your number; if you cancel before starting service with someone else, your number is lost.
Backdating an increased data allowance is preferable and allowed - prorating is why you can't backdate a reduction. It will most likely result in overages in a majority of situations, defeating the purpose of the reduction, so it is simply not possible to do. The reduced allowance will take effect the next billing cycle.

How to dynamically determine Receivers within BPM

Im trying to design a way to determine my receivers within my BPM process during runtime.   My Scenario is as follows:
SAP IDOC
    V
XI
             XI uses JAVA Mapping MT1 to determine vendors and if customer receives PIDX
                         JAVA Mapping MT2 to creates the PIDX output file if required
V
SENDs to required Vendor (PIDX if required otherwise email)
My problem is how to dynamically determine the appropriate receiving vendor for my PIDX.
I can not use the condition editor on the standard Receiver Determination because the output message (PIDX) doesn't have specific enough information to determine the vendor.
Other than the customer number there are no other values and we don't want to use customer number because each vendor can have multiple customer numbers (hundreds).
I've tried various attempts but none seem to work. This could also be because I have limited knowledge of BPMs and this is my first complex development. Below are the different attempts I've made at dynamically determining the receiver. Any input would be appreciated.
Receiver Scenario 1
I developed an interface mapping with MT1 as input and the SAP Receiver Determination as output. The problem is for me to use this, the interface mapping had to reference the PIDX output (MT2 instead of MT1) which has no data that I can use to determine the receiver.
Receiver Scenario 2
I added a receiver step right before my send step and used the receiver list. This appears to send the PIDX to everyone in the list and there is no way to evaluate or eliminate a name from the list.
Receiver Scenario 3
I created a context object in the Integration Builder and assigned it to a field in MT1. I then added a switch step with a branch for each vendor. Within each specific branch there is a Send step that has the context object name I created in the "Send Context" field. However, on the configuration side Im unable to access the context object which I created on the design side. Whenever I open the condition editor and select the radiobutton for "Context Object" the list does not include the context object I created in the Integration Builder.

Hi,
Try using the enhaced receiver determination concept.
Maybe based on certain field values you can write a UDF which calculates the receiver.
Try this Blog out
Link : [
http://help.sap.com/saphelp_nw70/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm]
Regards,
Abhishek
Award if helpful.

How can I determine which machines have activated Adobe Acrobat Standard 9?

How can I determine which machines have activated Adobe Acrobat Standard 9?

Hi jrector3,
You need to go to the respective machines and launch Acrobat and check if it prompts for serial number.
You can also go to the help menu and check if 'Deactivate' option is highlighted.
Regards,
Rave

How do I determine what URL to use when launching to display a RH10 .htm page?

Hello,
We are implementing RoboHelp 10 for our online documentation and are sourcing it from Framemaker 11. I am trying to determine exactly what URL information the developers need to build for the launch to the specific IBM System i screen. Is anyone launching RoboHelp from a backend ERP system? If so, how did you determine what level to use when building the URL for that page? Thanks for any assistance you can provide.

It depends on whether you just want to open the help at the default topic or open context sensitive topics.
Both methods are described in Calling Help on my site and there is more good information at http://www.wvanweelden.eu
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do I determine what generation my ipod is

how do I determine what generation my ipod is?

Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(97405)

I've got an old I-phone. How can I determine what model it is? 3 or 4.

I've got an old I-phone. How can I determine what model it is? 3 or 4.

Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(104117)

How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

When I go to Central Admin > Upgrade and Migration > Manage Databases Upgrade Status, I have 2 content databases which have the status:
Database is up to date, but some sites are not completely upgraded.
How can I determine which sites are not completely upgraded?

Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
using below PowerShell cmdlet.
Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
Get-SPDatabase | Format-Table Name, ID
Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
Test-SPContentDatabase WSS_ContentDB_Name
If you find any missing file issue in DB then resolve these issue to upgrade content database.
(verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
against a content database currently attached to the farm, or a content database that is not connected to the farm )
Use the Upgrade-SPContentDatabase cmdlet
to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
Upgrade-SPContentDatabase WSS_Content
reference:
http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

How can i determine what the most recent os my imac will run?

How can i determine what the most recent os my iMac will run?
Serial Number QP6*****VUW
Processor 2.16 GHz Intel Core 2 Duo
Currently running Version 10.5.8
<Edited by Host>

You CAN run 10.7, but I don't advise it, buy the 10.6.3 upgrade disk from the Apple Store online and then backup files off the machine and upgrade to 10.6.3., then Software Update to 10.6.8 would be the BEST option for your older hardware and it will run most all of your 10.5 software and be faster than 10.5 or 10.7.
If you go to 10.7 it won't run nearly any of your 10.5 software and you will have to buy all new ones for a machine that's getting a little bit dated, near it's end of life stage. 10.7 will slow your machine down, especially with low RAM.
http://roaringapps.com/apps:table
At your machines stage, the hard drive is getting old, the vents are clogged up with dust and it's going to cost a bit to get the drive etc upgraded. You can if you wish, but 10.7 really needs more RAM (4GB) and a faster hard drive.
But your still subjected to the video card going out etc.
IMO upgrade to 10.6.8 and stay there until the wheels fall off, then buy a new 10.8 machine being released after this summer or 10.9 machine.
Harden your Mac against malware attacks

How do I determine whether I have PCI Express v1.1 or v2.0?

This article in Mac Fixit states that computers with PCI Express v1.1 slots will NOT be able to take full advantage of OpenCL in Snow Leopard:
http://www.macfixit.com/article.php?story=20090612121357227
... In terms of PCI Express, My Mac Pro is on the cusp. PCI 2.0 was announced in January 2007 and presumably made it's way onto the assembly line a few months after that. I bought my refurbished Mac Pro in June 2007. I can't determine in the System Profiler if I have PCIv1.1 or v2.0. Does anyone know how to find out? MacTracker and machistory.com haven't answered the question. It seems some of the MacPro1,1 models shipped with v1.1 and some with v2.0. How do I determine what I have? Thanks for your help!
SPECS FROM MY SYSTEM PROFILER (SERIAL RM727......)
GRAPHICS/DISPLAYS
NVIDIA GeForce 7300 GT
Chipset Model: NVIDIA GeForce 7300 GT
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0393
Revision ID: 0x00a1
ROM Revision: 3008
PCI CARDS
NVIDIA GeForce 7300 GT
Name: NVDA,Display-B
Type: display
Bus: PCI
Slot: Slot-1
Vendor ID: 0x10de
Device ID: 0x0393
Subsystem Vendor ID: 0x0000
Subsystem ID: 0x0010
ROM Revision: 3008
Revision ID: 0x00a1
Link Width: x16

How do I determine whether I have PCI Express v1.1 or v2.0?
Hi,
Open Apple System Profiler (About this Mac:More info) and look at the Hardware: Model Identifier. If it says Mac Pro 1,1 or Mac Pro 2,1 you have PCIe v1.1 slots.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro/
If it says Mac Pro 3,1 you have PCIe v1.1 in slots 3 and 4 and PCIe v2.0 in slots 1 and 2.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2008/
If it says Mac Pro 4,1 you have PCIe v2.0 in all four slots.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2009/
Hope that helps!

How do I determine expected output size for System Exec vi

I am running a DOS exe from a Batch file using the System Exec vi. My exe is programming software for a microcontroller and passes data to the programmer via the serial port. When I run the batch file externaly to LabView it works fine. When I run the same batch file using the System Exec vi I get an error from the programmer app (DOS app). Not every time but usually within 20 attempts. I reduced the execution priority of my vi's to give more time to the DOS window. This seems to have helped but hasn't solved the problem completely. I read in the help file that LabView will run more efficiently if you specifiy the expected output size in the System Exec vi, but how do I determine it? Is the expected output
size the size of the bat file I call?

> I am running a DOS exe from a Batch file using the System Exec vi. My
> exe is programming software for a microcontroller and passes data to
> the programmer via the serial port. When I run the batch file
> externaly to LabView it works fine. When I run the same batch file
> using the System Exec vi I get an error from the programmer app (DOS
> app). Not every time but usually within 20 attempts. I reduced the
> execution priority of my vi's to give more time to the DOS window.
> This seems to have helped but hasn't solved the problem completely. I
> read in the help file that LabView will run more efficiently if you
> specifiy the expected output size in the System Exec vi, but how do I
> determine it? Is the expected output size the size of the bat fi
le I
> call?
If you think it is due to timing, and you wish to yield to the DOS app,
don't just lower the priority of LV, but use Wait ms to put overeager
diagram elements to sleep and limit their loop rate. Use the task
manager or performance monitor of the computer to determint if this is
the issue.
Greg McKaskle

How do you tell what week your computer was manufactured?

How can I tell what week my computer was manufactured? My serial number is [..snipped...]. Week 19 translates to what month?
Thank you

Someone, somewhere could theoretically, trace your serial number to your name, address and maybe even how you paid for your computer. I recently had my identity cloned in Mexico. I wouldn’t think of posting any unnecessary information on any website. But that’s just me.

How do I determine build week in serial?

Similar Messages

Maybe you are looking for