How do I determine if my file system is case-sensitive before I buy Photoshop CS5?

How do I determine if my file system is case-sensitive before I buy Photoshop CS5? I currently have Mac OSX 10.5.8 with an Intel Core 2 Duo Processor and 4GB of Memory.. Adobe says the following requirements are needed..
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with qualified hardware-accelerated OpenGL graphics card, 16-bit color, and 256MB of VRAM
Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
I don't know if I have a "hardware-accelerated OpenGL graphics card" or "256MB or VRAM".. I've never heard of "VRAM" before and the last bullet points is just as confusing. The last thing I want to do is buy this program and discover my Mac Book is just a tad bit to old for it, I've already done that once with a video game.

Disk Utility highlighting the drive or partition & clicking the blue Info icon may report it, but since I don't have Case Sensitive I can't tell for sure.
A simple test would be to save a small txt doc as...
test
Then save to the place same as...
TEST
If both show on the Disk, then it is, if it asks to replace test with TEST then it isn't.

Similar Messages

HFS File system with case sensitive is not accepted to install creative cloud? Is there any other way but install the whole MacOS again after formatting the drive. I cannot belief that Adobe is so bad to it's Mac customers..

After many hours setting up OS10.10 from he scratch the last step should be installing m Adobe apps again.
trying this I always get the error message that creative cloud does not accept case sensitive file systems and I shall use another drive.
This means I have to set up the whole machine again after formatting without case sensitive but then having copy problems with my NAS?
I cannot belief that Adobe is really demanding this. If so this would show how urgent this market need alternatives and some more competition...

Hi,
You can refer below link for more information.
Error "Case-sensitive drives not supported" or similar install error | Mac OS

How do we determine if the BW system is running slow?

Dear BWers,
How do we determine if the BW system is running slow? I have a situation where it is taking about 1 hr 30 min to load 700,000 records from the application server with direct mapping and no major transformations. How do i conclude if my BW system is running slow? Is there any documentation on this or benchmarks to analyze this? All and any help is appreciated.
Thanks
Raj

The time taken to load depends on a few factors like the following:
1. network bandwidth
2. system memory on the application server.
3. available processes in the application server to start the job
Make sure to load the master data, activate them and also apply change run before you load the transaction data. If you have secondary indexes, make sure you delete them before laoding data. I will suggest to have sequential load and put all the processes in a process chain. Where ever you can, try to split the package size. But in your case, the no of records is not that much and so you should be fine with one info package.
Ravi Thothadri

How to read some images from file system with webdynpro for abap?

Hi,experts,
I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
How to read some images from file system with webdynpro for abap?
Thanks a lot!

Hello Tao,
The parameter
icm/HTTP/file_access_<xx>
may help you to access the pictures without any db-access.
The following two links may help you to understand the other possibilities as well.
The threads are covering BSP, but it should be useful for WebDynpro as well.
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
Best regards
Christian

HT1199 I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

Did you format the drive for Mac use before you tried to use it as a backup drive?
Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app.

How to recover vm host os file system (e.g / ,/boot )

how to recover vm host os file system (e.g / ,/boot ) from the destroy os ,at the same time ,it dosen't impact other image

Anybody knows if the source code of scadm tool is available somewhere ? (opensolaris etc. ?)
I don't have any additional advice to offer other than asking that you to try the flash-update all over again,
one more time, as if it were the beginning again.Yes but how because the SC is not discovered anymore by Solaris :
"rmclomv: WARNING: DP_GET_SDP_VERSION failed, ret=4"
"The SC hardware could not be initialized."
Can you try to flash the mainalomfw ? Your log contained only the flash of the alombootfw !
/usr/platform/`uname -i`/sbin/scadm download alommainfw
I guess jumper JP2 allows to recover from a failed flash by selecting the un-touched half the PROM.It does not work as the SC is not responding anymore to Solaris
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
v210:~#
v210:~# cd /usr/platform/`uname -i`/lib/images
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images# /usr/platform/`uname -i`/sbin/scadm download alommainfw
scadm: The SC hardware could not be initialized.
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images#
ERROR: ERROR: Unable to open the SC device.
It's a pitty that obtaining OBP/ALOM updates requires a service contract. I got a V210 recently.
Unfortunately both OBP and ALOM are the intial release 4.8.2 / 1.0.I agree but it's probably also because you need support in case it fails ;-)
Thanks for your answers!

Installation Error "Could not determine information about file system"

Hi, i get the following error trying to install ABAP central instance on windows server 2003 enterprise edition. I am trying to do a local installation.
Anybody have any ideas what i am doing wrong?
INFO 2007-05-13 23:50:40
Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2007-05-13 23:50:40
Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2007-05-13 23:50:40
Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\q0w9e9r8t7.1.xml.
INFO 2007-05-13 23:50:41
Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
INFO 2007-05-13 23:50:41
Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
INFO 2007-05-13 23:50:41
Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\keydb.1.xml.
INFO 2007-05-13 23:50:41
Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\change.log.
INFO 2007-05-13 23:50:42
Output of change user /install is written to the logfile change.log.
WARNING 2007-05-13 23:50:42
Execution of the command "change user /install" finished with return code 1. Output: Install mode does not apply to a Terminal server configured for remote administration.
INFO 2007-05-13 23:50:42
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'ENTERPRISE\Administrator' on host '.'.
INFO 2007-05-13 23:50:42
Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\summary.html.
PHASE 2007-05-13 23:50:42
Prepare the installation program.
INFO 2007-05-13 23:50:49
Installation start: Sunday, 13 May 2007, 23:50:39; installation directory: C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI; product to be installed: SAP NetWeaver '04 SR1> SAP System Installation> ABAP System> Oracle> Unicode> Central Instance Installation
INFO 2007-05-13 23:50:50
Host operation t_HostInfo_SHARED processed successfully.
ERROR 2007-05-13 23:55:28
FSL-02107 Path component contains reserved character (':'): C:
ERROR 2007-05-13 23:55:28
FSL-02106 Path contains reserved character (':'):
C:
SAP
ERROR 2007-05-13 23:55:28
MOS-01236 Could not determine information about file system enterprise:, mounted at unknown.
WARNING 2007-05-13 23:55:28
The step GetMountInfo with step key SAPSYSTEM_CI|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo was executed with status ERROR.

Hi.. Philip...
During installation when it prompts / gives us to type / Browse the installtion sources like installation master / ker cd's / installation export .......,
What did you do ?
did you browse to the respective directory ??
or
did you manually type ??
I got the same problem on unix like. On oversight instead of browsing i typed manually and by mistake in one of the path i added space in one of the installation source path and installation ended with not able to locate file system error.
if you have typed it manually .. i beleive it could be similar to this ??
Update your reply
Rgds
PR

How can I save a jepg file in lower case letters? I check the use lower case box in preferences but it's not happening. PSCC

how can I save a jepg file in lower case letters? I check the use lower case box in preferences but it's not happening. PSCC

Let's try a preferences reset: (Windows)
Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.

How am I suppose to check my system requirements? Everytime I download the Photoshop CC, it says I do not have some requirements.

How am I suppose to check my system requirements? Everytime I download the Photoshop CC, it says I do not have some requirements.

See http://helpx.adobe.com/photoshop/system-requirements.html

How do I use a NAS file system attached to my router to store iTunes purchases?

We have four Windows devices networked in our house. They all run iTunes with the same Apple ID so when any one of them has iTunes running, we can see that computer on our Apple TV. Two run Windows XP, one runs Vista Business, and the newest runs Windows 7. Upgrading all to the same Windows software is out of the question. Our NAS is hung on an "off warranty" Linksys E3000 router which communicates via USB with a 1TB NTFS formatted Western Digital hard drive. Our plan when we set up this little network, not cheaply, in our 1939 baloon construction tank of a house, was to build our library of digital images, music, and video primarily on that device. It supports a variant of Windows streaming support, but poorly. The best streaming support for our environment seems to be our ethernet connected Apple TV which is hung off the big TV in our family room, and has access to the surround sound "Home Theater" in that room. We've incrementally built up collections of photos, digitized music, and most recently educational materialsd, podcasts, etc. which threaten storage limits on a couple of default C: drives on these windows systems. iTunes, before the latest upgrades, gave us some feedback on the file system connections it established without going to the properties of the individual files, but the latest one has yet to be figured out. MP3's and photos behave fairly well, including the recently available connection between Adobe software and iTunes which magically appeared, allowing JPEG files indexed by Adobe Photoshop Elements running on the two fastest computers to show up under control on the Apple TV attached 56' Samsung screen!
Problems arose when we started trying to set things up so that purchases downloaded from the iTunes store ended up directly on the NAS, and when things downloaded to a specific iTunes library on one of the Windows boxes caused storage "issues" on that box. A bigger problem looming in the immediate future is the "housecleaning" effort which is part of my set of "new years resolutions." How do I get control of all of my collections and merge them on the NAS without duplicate files, or when, for example, we have .ACC and .MP3 versions, only the required "best" option for the specific piece of music becomes a candidate for streaming?
I envission this consolidation effort as a "once in a lifetime" effort. I'm 70, my wife is 68 and not as "technical" as I am, so documented procedures will be required.
I plan to keep this thread updated with progress and questions as this project proceeds. Links to "how to" experiences which are well documented, etc. may be appreciated by those who follow it. I plan to post progress reports and detailed issues going forward. Please help?

Step 1 - by trial and error...
So far, I have been able to create physical files containing MP3 and JPG on the NAS using the Windows XP systems to copy from shared locations on the Vista and Win7 boxes. This process has been aided by the use of a 600 GB SATA 2 capable hard drive enclosure. I first attach to Win 7 or Win Vista and reboot to see the local drive spaces formatted on the portable device. Then I copy files from the user's private directories to the public drive space. When the portable drive is wired to an XP box, I can use Windows to move the files from the portable device to the NAS without any of the more advanced file attributes being copied to the NAS. Once the files are on the NAS, I can add the new folder(s) to iTunes on any of the computers and voila, the data becomes sharable via iTunes. So far, this works for anything that I have completely purchased, or for MP3's I made from the AIC files created when I purchased alblums via iTunes.
I have three huge boxes full of vynl records I've accumulated. The ones that I've successfully digitized via a turntable attached to the sound card on one of my computers and third party software, have found their way to the NAS after being imported into iTunes and using it to bring down available album art work. In general I've been reasonably well pleased with the sound quality of digital MP3 files created this way, but the software I've been using sometimes has serious problems automatically separating individual songs from the album tracks and re-converting "one at a time" isn't very efficient.

How to view crawled documents of file system in the browser using sharepoint search

Hi,
I think this should be pretty obvious. However, somehow I am not able to do it. Here is what i am working on:
I created a folder on my D:\ drive on the SharePoint server. Added a few word documents there.Created a new content source in my Search Service Application and configured it to crawl above folder from file system. Ran a full crawl. All the documents are
crawled successfully. I can see the documents on the search page. Now, the problem is:
How can I open this document directly in the browser? Becuase the path i get is of the folder on the server. If this isn't possible then I think,there is no use of this feature. I just see the title and a short description of the document.
But, I think it should be possible. I just don't know how to do it.
Any ideas will be highly appreciated.

Hi Mohan,
According to your description, my understanding is that you want to open the documents in file shares in the browser by clicking the link in search results.
As the files are not stored in SharePoint, so we need to configure Office Web Apps for the documents to open the files in the browser.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/70541f55-6a66-4d55-8f2c-9f9a356b9654/how-to-open-sharepoint-search-results-from-file-server-using-office-web-apps-server-2013?forum=sharepointsearch
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to read a client's File system

Hi,
I use a web application where in the client can upload a directory to the server. Then the server should display all the files under that directory by fetching details from the client's disk.
how should this b done with java? Java file system does not allow this. If contents of a single file needs to be read, then it can be sent as multipart form data.
How to read or find out the files under a directory on the client machine?
Thnx in advance

It can be done using the File class used in Java. It can list out directories .
Several methods are available for inspecting an instance of the File class. Some of the important ones are:
Method                                                                                             Purpose
boolean exists()                                   does the file exist?
boolean isFile()                                    is it a file?
boolean isDirectory()                            � or a directory?
String[] list()                                       return the names of all files and directories in a directory
String getName()                                get the file or directory's name
String getPath()                                  get the file or directory's path
These methods are actually all we need in order to find all files and directories in a given directory--all the way down to the last leaves in the directory tree.

How so I protect my root file system? - x86 solaris 10 - zfs data pools

Hello all:
I'm new to ZFS and am trying to understand it better before I start building a new file server. I'm looking for a low cost file server for smaller projects I support and would like to use the ZFS capabilities. If I install Solaris 10 on a x86 platform and add a bunch of drives to it to create a zpool (raidz), how do I protect my root filesystem? The files in the ZFS file system are well protected, but what about my operating system files down in the root ufs filesystem? If the root filesystem gets corrupted, do I lose the zfs filesystem too? or can I independantly rebuild the root filesystem and just remount the zfs filesystem? Should I install solaris 10 on a mirrored set of drives? Can the root filesystem be zfs too? I'd like to be able to use a fairly simple PC to do this, perhaps one that doesn't have built in raid. I'm not looking for 10 terabytes of storage, maybe just four 500gb sata disks connected into a raidz zpool.
thanks,

patrickez wrote:
If I install Solaris 10 on a x86 platform and add a bunch of drives to it to create a zpool (raidz), how do I protect my root filesystem?Solaris 10 doesn't yet support ZFS for a root filesystem, but it is working in some OpenSolaris distributions.
You could use Sun Volume Manager to create a mirror for your root filesystem.
The files in the ZFS file system are well protected, but what about my operating system files down in the root ufs filesystem? If the root filesystem gets corrupted, do I lose the zfs filesystem too?No. They're separate filesystems.
or can I independantly rebuild the root filesystem and just remount the zfs filesystem? Yes. (Actually, you can import the ZFS pool you created).
Should I install solaris 10 on a mirrored set of drives?If you have one, that would work as well.
Can the root filesystem be zfs too?Not currently in Solaris 10. The initial root support in OpenSolaris will require the root pool be only a single disk or mirrors. No striping, no raidz.
Darren

How to Refresh JTree if a file System got changed during Run-time

Hi,
Can anyone tell me how to refresh a JTree(javax.swing.JTree) used for displaying file system(both local and remote).
I'm getting a problem if a file/directoy is added to the file system, after my Applet is loaded. Actually, i have used DefaultTreeModel's reload() method for refreshing and calling it inside SwingUtilities.invokeLater() using Thread, but its not working.
I want that the tree should reflect the latest Files/Directories on the click of a node, if any file or directory is added under that node.
Plz tell me if this is possible or not.
Thanks

Hi Shay_te,
Thanx for ur reply as i was eagerly waiting for the one.
but the example is using the TreeTable
and i have used JTree and DefaultTreeModel.
I'm calling reload(node) within treeExpand() method
Then, i'm regestring addTreeModelListener() as
m_model.addTreeModelListener(new javax.swing.event. TreeModelListener(){ }
inside which all 4 methods are over-ridden
code snippet is as follows so plz help me and tell if this the right way:
class DirExpansionListener implements TreeExpansionListener{
        DirExpansionListener(){
        public void treeExpanded(TreeExpansionEvent event) {
            final DefaultMutableTreeNode node = getTreeNode(event.getPath());
            final FileNode fnode = getFileNode(node);
            Thread runner = new Thread() {
                public void run() {
                    if (fnode != null && fnode.expand(node)) {
                        Runnable runnable = new Runnable() {
                            public void run() {
                                try{
                                   m_model.reload(node);
                                    m_model.addTreeModelListener(new javax.swing.event.TreeModelListener() {
                                        public void treeNodesChanged(javax.swing.event.TreeModelEvent evt) {
                                        public void treeStructureChanged(javax.swing.event.TreeModelEvent evt) {
                                            System.out.println("Path of node changed->"+evt.getTreePath());
                                        public void treeNodesInserted(javax.swing.event.TreeModelEvent evt) {
                                            System.out.println("Nodes Inserted method called..");
                                        public void treeNodesRemoved(javax.swing.event.TreeModelEvent evt) {
                                    System.out.println("Run inside DEvent called..");
                                    //Thread.sleep(500);
                                    //fnode.expand(node);
                                }catch(Exception e){System.out.println("err :" +e);}
                        SwingUtilities.invokeLater(runnable);
            runner.start();
        public void treeCollapsed(TreeExpansionEvent event) {}
    Please reply...

How to get homedirectory of local file system?

how to get home directory of local file system?
What code i have to write?

String homeDirectory = System.getProperty("user.home");

How do I determine if my file system is case-sensitive before I buy Photoshop CS5?

Similar Messages

Maybe you are looking for