How do I determine if the Firefox I am running is 32 bit or 64bit?

I downloaded the latest version of Firefox (6.0.2). After the installation the wizard notified me that my Flash Player was out of date. I attempted to download the latest Flash Player and it told me it timed out and sent me to a trouble page. It said that I can not load the latest Flash Player on at 64 bit browser. I am trying to see what bit Firefox browser I am using.

Hi Toodles
The pin strips on the new modules maybe a little thicker than your original modules, and it's going to take more force to seat them properly. If the new Memory Specifications are correct I would try them again. Slide them in untill they stop, then push real hard untill you feel them seat into place.
I've never seen a report about an odd amount of ram shown. If reinstalling the ram modules does not solve your issue, and may be a indication that there is something wrong with one of the slots.
Dennis
17" iMac Intel Core Duo - 2GB Ram - Mac OS X (10.4.10) - Maxtor 300GB FireWire - Creative Inspire 2.1 - 2G Nano

Similar Messages

How do we determine if the BW system is running slow?

Dear BWers,
How do we determine if the BW system is running slow? I have a situation where it is taking about 1 hr 30 min to load 700,000 records from the application server with direct mapping and no major transformations. How do i conclude if my BW system is running slow? Is there any documentation on this or benchmarks to analyze this? All and any help is appreciated.
Thanks
Raj

The time taken to load depends on a few factors like the following:
1. network bandwidth
2. system memory on the application server.
3. available processes in the application server to start the job
Make sure to load the master data, activate them and also apply change run before you load the transaction data. If you have secondary indexes, make sure you delete them before laoding data. I will suggest to have sequential load and put all the processes in a process chain. Where ever you can, try to split the package size. But in your case, the no of records is not that much and so you should be fine with one info package.
Ravi Thothadri

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Websites remembering you and automatically log you in is stored in a cookie.
*Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear Cookies
*do not clear Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

Async tcp client and server. How can I determine that the client or the server is no longer available?

Hello. I would like to write async tcp client and server. I wrote this code but a have a problem, when I call the disconnect method on client or stop method on server. I can't identify that the client or the server is no longer connected.
I thought I will get an exception if the client or the server is not available but this is not happening.
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
How can I determine that the client or the server is no longer available?
Server
public class Server
private readonly Dictionary<IPEndPoint, TcpClient> clients = new Dictionary<IPEndPoint, TcpClient>();
private readonly List<CancellationTokenSource> cancellationTokens = new List<CancellationTokenSource>();
private TcpListener tcpListener;
private bool isStarted;
public event Action<string> NewMessage;
public async Task Start(int port)
this.tcpListener = TcpListener.Create(port);
this.tcpListener.Start();
this.isStarted = true;
while (this.isStarted)
var tcpClient = await this.tcpListener.AcceptTcpClientAsync();
var cts = new CancellationTokenSource();
this.cancellationTokens.Add(cts);
await Task.Factory.StartNew(() => this.Process(cts.Token, tcpClient), cts.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);
public void Stop()
this.isStarted = false;
foreach (var cancellationTokenSource in this.cancellationTokens)
cancellationTokenSource.Cancel();
foreach (var tcpClient in this.clients.Values)
tcpClient.GetStream().Close();
tcpClient.Close();
this.clients.Clear();
public async Task SendMessage(string message, IPEndPoint endPoint)
try
var tcpClient = this.clients[endPoint];
await this.Send(tcpClient.GetStream(), Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async Task Process(CancellationToken cancellationToken, TcpClient tcpClient)
try
var stream = tcpClient.GetStream();
this.clients.Add((IPEndPoint)tcpClient.Client.RemoteEndPoint, tcpClient);
while (!cancellationToken.IsCancellationRequested)
var data = await this.Receive(stream);
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(NetworkStream stream, byte[] buf)
await stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive(NetworkStream stream)
var lengthBytes = new byte[4];
await stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await stream.ReadAsync(buf, 0, buf.Length);
return buf;
Client
public class Client
private TcpClient tcpClient;
private NetworkStream stream;
public event Action<string> NewMessage;
public async void Connect(string host, int port)
try
this.tcpClient = new TcpClient();
await this.tcpClient.ConnectAsync(host, port);
this.stream = this.tcpClient.GetStream();
this.Process();
catch (Exception exception)
public void Disconnect()
try
this.stream.Close();
this.tcpClient.Close();
catch (Exception exception)
public async void SendMessage(string message)
try
await this.Send(Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(byte[] buf)
await this.stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await this.stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive()
var lengthBytes = new byte[4];
await this.stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await this.stream.ReadAsync(buf, 0, buf.Length);
return buf;

Hi,
Have you debug these two applications? Does it go into the catch exception block when you close the client or the server?
According to my test, it will throw an exception when the client or the server is closed, just log the exception message in the catch block and then you'll get it:
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.Invoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
Console.WriteLine(exception.Message);
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
By the way, I don't know what the SafeInvoke method is, it may be an extension method, right? I used Invoke instead to test it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I stop from getting the "Firefox is already running" error message when trying to open links and FF has already been opened through a symbolic link?

I use symbolic links and program shortcuts as a way to easily open different Firefox profiles ie. one for casual/personal use and another for work. This works well, but I get the "Firefox is already running, but is not responding" error message if I try to open external links with FF as my default browser. FF is actually open and running fine, but I guess it doesn't acknowledge this fact because of how I'm originally starting the process.
I wasn't able to add the symbolically linked executables to the default program pane. Is there a way to bypass this error or other way to fix this?
The solution to the question linked below is what I'm using to open the different FF profiles.
http://superuser.com/questions/255312/pin-same-app-multiple-times-in-windows-7

hello, this is probably happening when you run the default profile with the -no-remote switch.
http://kb.mozillazine.org/Profile_in_use

How do i determine what the "other" usage is on my iPad (3.5 gig)

how do i determine what the "other" usage is on my iPad (3.5 gig)

Hey there, I seem to have an issue with the 'other' usage thing.
On my computer and ipod, it shows like this:
when I dont even have more than 2+GB in music and less than 1gb in apps and pictures.
I am on iOS5.1.1 because I had many problems with the Wi-Fi bug for iOS6 (no, it didnt fix for me with 6.0.1)
I am very frustatred because I cant even sync music anymore. AndI dont want to do a reset because it takes me 3+ hours to transfer my music.
any help}?

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

Yes I am considering switching from the VZ Edge to Sprint iPhone for Life plan.
Thanks,
Adrian
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Mac shut down due to problem; I rebooted fine. how do I determine what the problem was?

mac shut down due to problem; I rebooted fine. how do I determine what the problem was?

When shut down and rebooted, the Mac OS X does background maintenance on the system. That can solve minor issues.
Beyond this, it is a good idea to run Disk Repair yourself just to make sure.
Reboot with the option key held down. On the screen that comes up select the Recovery disk icon and Continue.
On the next screen Clcik Disk Utility and Continue.
In DU, in the list on the left select the drive to be repaired - click the item that is indented to the right, not an an item whose name starts on the far left.
Click First Aid, then Repair Disk.
After that is done, quit DU and restart as usual.

How can i determine what the most recent os my imac will run?

How can i determine what the most recent os my iMac will run?
Serial Number QP6*****VUW
Processor 2.16 GHz Intel Core 2 Duo
Currently running Version 10.5.8
<Edited by Host>

You CAN run 10.7, but I don't advise it, buy the 10.6.3 upgrade disk from the Apple Store online and then backup files off the machine and upgrade to 10.6.3., then Software Update to 10.6.8 would be the BEST option for your older hardware and it will run most all of your 10.5 software and be faster than 10.5 or 10.7.
If you go to 10.7 it won't run nearly any of your 10.5 software and you will have to buy all new ones for a machine that's getting a little bit dated, near it's end of life stage. 10.7 will slow your machine down, especially with low RAM.
http://roaringapps.com/apps:table
At your machines stage, the hard drive is getting old, the vents are clogged up with dust and it's going to cost a bit to get the drive etc upgraded. You can if you wish, but 10.7 really needs more RAM (4GB) and a faster hard drive.
But your still subjected to the video card going out etc.
IMO upgrade to 10.6.8 and stay there until the wheels fall off, then buy a new 10.8 machine being released after this summer or 10.9 machine.
Harden your Mac against malware attacks

How do I determined if the USB ports are working?

How can I determine if the USB ports are working. Macbook Pro i7.
Thanks for any help. This is a new computer to me migrating from a PC system.

Blessings to those who are able to reply with possible answers. I am sorry....but I have spent days working on getting my two USB ports to work also. I basically use the USB ports for a wireless mouse and various flashdrives/memory sticks. I have a MacBook Pro 2011 Snow Leopard 10.6.8 I have tried software update, SMC and PRAM resets, battery reset, hardware test, creating a new user account....and browsing and reading numerous discussion boards.....awgh! I have stopped short of using my install DVD (fear of loosing data), upgrading to Lion or Mountain Lion (some fear of loosing an application that might not be compatible), contacting an Apple Store (AppleCare or whatever--live 2 hours away + fear of expense), and of course, trashing the laptop. Does anyone out there have any possible solutions? I see I am not alone. --A frustrated first-time Apple products owner.

How can I determine which profile Firefox 5 is currently using?

How can I determine which profile Firefox 5 is currently using?

in address bar type:
'''''about:cache'''''
and look at '''''Offline cache device -> Cache Directory'''''

How do I delete just the firefox bookmarks but not the the bookmarks toolbar icons

I deleted my firefox bookmarks so I could import my gooogle bookmarks,but this also deleted my firefox bookmarks toolbar entries...it took me along time to put these in again.
How do I delete just the firefox bookmarks but not the the bookmarks toolbar icons

What kind of problems did you get after installing the extension?
You can try to remove the history manually in the History Manager by doing a search for a colon.
How many history items do you have to remove?
If you only want to do this once or occasionally then you can consider to use this code:
*http://kb.mozillazine.org/User:Dickvl/JavaScript_Error_Console#Expire_History_By_Days
You will have to calculate the number of days that you want to keep to remove only history items from 2013 and older (365+31+28+26)
You can open the Browser Console (Firefox/Tools > Web Developer).
Paste the JavaScript code in the command line and press the Enter key to run the code.
*Toggle the devtools.chrome.enabled pref on the <b>about:config</b> page to true to enable the command line
*https://developer.mozilla.org/Tools/Browser_Console#Browser_Console_command_line
<pre><nowiki>
(function(){
/* expire history by days, based upon bug 660646 comment 5/7 - [email protected] */
var Cc = Components.classes, Ci = Components.interfaces;
var his = Cc["@mozilla.org/browser/nav-history-service;1"].getService(Ci.nsIBrowserHistory);
var prs = Cc["@mozilla.org/embedcomp/prompt-service;1"].getService(Ci.nsIPromptService);
var day = 0, obj = new Object, txt = "Expire History"; obj.value = "90";
if (prs.prompt(null,txt,"Days of history to keep",obj,null,{})){
day = parseInt(obj.value);
if(!isNaN(day)&&(day>0)){
his.removeVisitsByTimeframe(0,(new Date().setHours(0,0,0,0) - day * 86400000) * 1000);
}else{ prs.alert(null,txt,"Error Parsing Days: "+obj.value); }
</nowiki></pre>
If hat doesn't work then you may have a problem with the places.sqlite database file and you may have to reset places.sqlite.
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
You can move (copy/paste) history items that you want to keep to a bookmarks folder.
See also:
*Norwell History Tools: https://addons.mozilla.org/firefox/addon/norwell/

How I get rid of the Firefox 'Be a web hero etc' & other like windows appearing? It's irritating!

How I get rid of the Firefox 'Be a web hero etc' & other like windows on starting Firefox. It's very very irritating.

You can add this code to userContent.css to hide the snippets container on the about:home page.
* http://kb.mozillazine.org/userContent.css
* http://kb.mozillazine.org/Editing_configuration
You can use the ChromEdit Plus extension to have easier access to the customization files.
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
<pre><nowiki>@-moz-document url(about:home){
/* hide snippet container on the about:home page */
#snippetContainer { display: none !important; }
</nowiki></pre>

How can I determin if adprep /domainprep /gpprep was run

I know that adprep /domainprep was run before adding the first 2008 R2 server but how do I determine if
adprep /domainprep /gpprep was run after that?

Hello,
Other than checking using AD attributes, if you run it and it you runned it before then you will get a message indicating that your domain was already prepared.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft Student
Partner 2010 / 2011
Microsoft Certified Professional
Microsoft Certified Systems Administrator:
Security
Microsoft Certified Systems Engineer:
Security
Microsoft Certified Technology Specialist:
Windows Server 2008 Active Directory, Configuration
Microsoft Certified Technology Specialist:
Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified Technology Specialist:
Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified Technology Specialist:
Windows 7, Configuring
Microsoft Certified IT Professional: Enterprise
Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer

How can I turn off the 2 blue lines running vertically in my image in Photoshop?

How can I turn off the 2 blue lines running vertically through my image in Photoshop? I want to save my work but do not know if these lines will persist in the saved image.

normfb wrote:
I assume the Rulers are showing. In that case, to get rid of each line use the Move tool to straddle the line and drag it whence it came. I really didn't need to add this comment but it is the first time in years I have had a chance to use the word "whence".
Is this a guide I see before me? Doeth it conspire to confuseth mine eyes with sapphire lines that afoul my worthy parchment, and draw my quill from its righteous path? Be gone foul guide from whence thou cometh. Verily, forsooth, and hey nonny nonny.

How do I determine if the Firefox I am running is 32 bit or 64bit?

Similar Messages

Maybe you are looking for