How do I determine the wattage of an older adapter?
I've looked it up, and my iPad mini can be charged with a 5W or a 12W adapter. I have an older adapter that I believe came with my iPod touch 1st gen. It's been charging my mini just fine till the other night. I plugged in the iPad, and it was flipping between charging and not charging in quick succession. So I used a different charger and it charged fine. The iPod charger is not labeled with the wattage like the newer ones are. I tried plugging my iPad air into it and it does a similar thing, but the iPhone 5s charges fine with it.
Is this a malfunction of the charger, or is it going bad in some way??
If you're running iPhoto 8 (09) select the event and look at the Info pane at the lower left hand corner of the window. It will give you the number of photos and size:
for iPhoto 9 (11) open the Event, select all of the photos in it and open the Info drawer at the right by typing Command+i. The number of photos and size will be at the top of the Info drawer.
OT
Similar Messages
-
How can I determine the type of video out connector I need?
Howdy,
I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
Thanks for any help,
Zebulon TThanks, Ded,
You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
Thanks very much.
Zeb T -
Hello,
I am at my wits end into this. Either I am doing it the wrong way or it is not possible.
Let me explain. I need a vb script for the following scenario:
1. The script is to run on multiple Windows 7 machines (32-Bit & 64-Bit alike).
2. These are shared workstation i.e. different users login to these machines from time to time.
3. The objective of this script is to traverse through each User Profile folder and get the size of the 'My Documents' folder within each User Profile folder. This information is to be written to a
.CSV file located at C:\Temp directory on the machine.
4. This script would be pushed to all workstations from SCCM. It would be configured to execute with
System Rights
I tried the script detailed at:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/03/31/how-can-i-determine-the-size-of-the-my-documents-folder.aspx
Const MY_DOCUMENTS = &H5&
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(MY_DOCUMENTS)
Set objFolderItem = objFolder.Self
strPath = objFolderItem.Path
Set objFolder = objFSO.GetFolder(strPath)
Wscript.Echo objFolder.Size
The Wscript.Echo objFolder.Size command in the script at the above mentioned link returned the value as
'0' (zero) for the current logged on user. Although the actual size was like 30 MB or so.
I then tried the script at:
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Script/Q_27869829.html
This script returns the correct value but only for the current logged-on user.
Const blnShowErrors = False
' Set up filesystem object for usage
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
' Display desired folder sizes
Wscript.Echo "MyDocuments : " & FormatSize(FindFiles(objFSO.GetFolder(objShell.SpecialFolders("MyDocuments"))))
' Recursively tally the size of all files under a folder
' Protect against folders or files that are not accessible
Function FindFiles(objFolder)
On Error Resume Next
' List files
For Each objFile In objFolder.Files
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:01", objFolder.Path
On Error Resume Next
FindFiles = FindFiles + objFile.Size
If Err.Number <> 0 Then ShowError "FindFiles:02", objFile.Path
Next
If Err.Number = 0 Then
' Recursively drill down into subfolder
For Each objSubFolder In objFolder.SubFolders
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:04", objFolder.Path
FindFiles = FindFiles + FindFiles(objSubFolder)
If Err.Number <> 0 Then ShowError "FindFiles:05", objSubFolder.Path
Next
Else
ShowError "FindFiles:03", objFolder.Path
End If
End Function
' Function to format a number into typical size scales
Function FormatSize(iSize)
aLabel = Array("bytes", "KB", "MB", "GB", "TB")
For i = 0 to 4
If iSize > 1024 Then iSize = iSize / 1024 Else Exit For End If
Next
FormatSize = Round(iSize, 2) & " " & aLabel(i)
End Function
Sub ShowError(strLocation, strMessage)
If blnShowErrors Then
WScript.StdErr.WriteLine "==> ERROR at [" & strLocation & "]"
WScript.StdErr.WriteLine " Number:[" & Err.Number & "], Source:[" & Err.Source & "], Desc:[" & Err.Description & "]"
WScript.StdErr.WriteLine " " & strMessage
Err.Clear
End If
End Sub
The only part pending, is to achieve this for the 'My Documents' folder within each User Profile folder.
Is this possible?
Please help.Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯ -
How do I determine the # of times a song has been down loaded; 7 is max?
How do I determine the # of times a song has been down loaded? Is 7 max?
Jim, I apprecite your help. Im still lost...not that efficient on computer. Some notes, If burn playlist to disc doesn appear in the menu, it means that the playlist you selected cant be burned to a CD because it contains items that have usage restrictions; if the playist contains itunes store purchases that are not itune plus songs, you can burn the playlsit to a CD up to 7 times; DRM - Digital Rights Management???? Any help is appreciated Thank You
-
How do you determine the optimal size for Mozilla Firefox?
How do you determine the optimal size for cache in Mozilla
Firefox? I am using Firefox 7.0.1 on a 64-bit Windows 7 Ultimate operating system with 3GB RAM and 300 GB hard drive, but I have other computers running Windows XP. If the answer doesn't apply to all current versions of Firefox on all supported Windows operating systems, please explain the differences. Is there a formula for calculating the best cache size?I found that the best idea is to let Firefox decide that itself.
-
How do you determine the firmware version for a laptop docking station?
How do you determine the firmware version of a HP docking station?
Laptop Model: HP 2740p
OS: 64bit Windows 7
Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
Thank you for any assistance.
Alvinatenpo wrote:
How do you determine the firmware version of a HP docking station?
Laptop Model: HP 2740p
OS: 64bit Windows 7
Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
Thank you for any assistance.
Alvin
WA995AA#ABA shows to be a hard drive, not a docking station -
How do you determine the picture that is shown on iTunes for your podcast?
How do you determine the picture that is shown on iTunes for your podcast? Is that done in iWeb or Garagetunes?
That is a supported format,
Pull the battery while the device is ON, replace after a minute, Let the device reboot 1-3 min,
see if the problem is fixed,
If not we may have to reload the device OS to get back the missing option.
Thanks,
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
How do I determine the version of ADI
Hi,
We have ADI installed on some machines - can anyone advise how I can determine the version of ADI once it is installed?
ThanksThis is a little late, but may be it will help someone else in the future.
There may be an easier way, but this is what works for me.
Log into ADI. Go to the Request Center. Click the ‘tool’ icon.
It looks like a hammer and screwdriver.
On the next screen, look in the bottom left corner.
It will show the version of ADI.
HTH,
Mark -
How do we determine the HTTP authentication header for our hosted solution?
How do we determine the HTTP authentication header (adobeconnect_admin_httpauth) from our hosted solution? The documentation says to find it in a custom.ini file but I have no clue how to access that.
I need to supply that to the adobeconnect plugin used with a Moodle instance, screnshot below.
If it helps, when I click "Test Connection", I see the following output.
A series of tests have been run in order to determine whether the Adobe Connect Pro server has been properly setup for this integration to work and to also determine whether the user credentials provided in the activity global settings has the correct permissions to perform the neccessary tasks required by the activity module. If any of the tests below have failed, this activity module will not function properly.
For further assistance and documentation in how to set up your Adobe Connect Pro server please consult the MoodleDocs help page for this activity module Help page
Sending common-info call:
successfully obtained the session key: na11breezrirhb4f4ryf5shqy
successfully logged in as admin user
Testing retrevial of shared content, recording and meeting folders:
error obtaining shared content folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining forced-archives (meeting recordings) folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining meetings folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error creating meeting testmeetingtest folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-update</param><param name="type">meeting</param><param name="name">testmeetingtest</param><param name="folder-id"/><param name="date-begin">2015-03-14T06:53:39.000+00:00</param><param name="date-end">2015-03-14T07:53:39.000+00:00</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="invalid"><invalid field="folder-id" type="id" subcode="format"/></status></results>
error creating user testusertest
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">principal-update</param><param name="first-name">testusertest</param><param name="last-name">testusertest</param><param name="login">[email protected]</param><param name="password">9B396EA828A00203FB3E8E69010FE537</param><param name="extlogin">[email protected]</param><param name="type">user</param><param name="send-email">false</param><param name="has-children">0</param><param name="email">[email protected]</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
What are we missing?
Thanks!Here is the docuementation for loging in with an HTTP Headder Adobe Connect 9 * Log in from an application
Seeing as there may be some modification to files on the server, you may need to work with Adobe Support to see if they can be modified in the Hosted environment.Adobe Connect Help | Adobe Connect Support -
How do I determine the size of an event (cmd I does not show any size for events).
How do I determine the size of an Event in iPhoto? (Cmd + I does not show size information at the event level).
If you're running iPhoto 8 (09) select the event and look at the Info pane at the lower left hand corner of the window. It will give you the number of photos and size:
for iPhoto 9 (11) open the Event, select all of the photos in it and open the Info drawer at the right by typing Command+i. The number of photos and size will be at the top of the Info drawer.
OT -
Mailexample.sql how do you determine the file type?
I'm using the mailexample.sql which explains how to use the demo_mail wrapper package for utl_smtp. There's a procedure for attaching text files and a procedure for attaching binary files. I've got binary files to attach to email successfully.
How can I determine the file type so that I can use the attach_text procedure when attaching text files rather than the procedure for attaching binary files?
SandyWatch out! I think there is a bug in that code :-
bug with PL/SQL Sample - maildemo.sql
To answer your question - the usual way of determining a file type is to look for 'magic numbers' in the file that indicate its type. For example, Windows exe files often (always?) begin with the two letters 'MZ'. Zip files begin with 'PK'; Rar archives begin with 'Rar!'. Text files can begin with anything, and do not have any characteristic marker, but USASCII7 (which is what the format that routine is designed for - I think), is a characterset that only uses the first 7 bits of the byte. You could read the file, and if you find any bytes > 127, then you know it is not a USASCII7 file. I have seen various programs that 'sample' the first 64 or 256 bytes of a file instead of reading the whole file, and they usually get it right.
Hope this helps.
Takmeister -
How do you Determine the Largest Size/Fastest Speed Hard Drive
In general, how do you determine the maximum hard drive size/speed you can upgrade to?
As long as the drive your are considering physically fits as already stated there is no maximum size you can install. Please complete your profile so we know what machine you have.
If your machine is covered by a warranty or AppleCare I would recommend against installing another HD as this may invalidate the warranty. I would recommend in that case using a Firewire 800 external HD instead.
Regards,
Roger -
This may be a basic question... but in InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to determine what word count we can fit in, and c) how to do it in a table? Thanks!
Set your ruler increments to pixels Preferences>Units & Increments. You can fill the text box with placeholder text Type>Fill with Placeholder text and get a word count from the Info panel with Show Options turned on from the flyout.
From the Transform panel you can set a text box's width and height -
How do I determine the number of plots on a waveform graph?
How do I determine the number of plots that have previously been plotted on a waveform graph? I am loading dynamic data from a file. If I convert to an array and size it and there is only one plot, I get the number of data points and I don't know how to tell the difference.
Usually by reading the graph terminal or a local of it and determining the first or second dimension (not sure which at the moment) size of the resulting 2 dimensional array. If it is a 1 dimensional array you have either only one plot or an array of clusters each representing one plot. But as these data types are determined by compile time, there shouldn't be a problem with this causing ambiguity.
Rolf K
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
How can I determine the number and sizes of redologs?
Dear all,
How can I determine the number and sizes of redologs are sufficient to allow redo log switching while hot backup is in progress?
Please advice,
AmyTwo questions here - what the OP put as the subject title and what was asked in the thread, which are different questions.
I would interpret the question in the thread to mean "how to avoid hanging due to archiving waiting for a redo log group to become available." Alert log, wait events, and user complaints would be the source of information here.
Maybe you are looking for
-
Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite
Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite. I am trying to bring the old iMac screen up on the Yosemite system
-
??Spry Tabbed panels funny in Firefox
Hello, I am using the Spry tabbed panels in Dreamweaver CS4 and when I render in firefox there is a large amount of space at the bottom as if the tabbed panels are allowing space for each subsequent tab - even though the text is in the next tab. h
-
Hi,I Bought Recently a Lenovo G510 (About Weeks) When I Start Playing Games,The Left Side Of The laptop Become Hot And It Start Blowing Hot Air out Of It.(I Was Playing Call Of Duty 4) .is It A Hardware Failure Or What?Please Help Me
-
Send the result from SM36 run to a recepient
Hi Gurus! After defining a job in the background , is it possible to have the report sent to a particular receipient through mail saying that the report ran with success or error. I mean a program has been fixed to run in the background everyday . In
-
I currently have windows 7 32bit installed and want to install 64bit. Laptop won't boot into install disk and just restarts into windows. Boot order is set to cd/dvd rom and I have verified with a 32bit windows 7 disk and that one will start the inst