How do I determine what applications are communicating using SMB?

I would like to try to determine if there is a way to determine what applications are using SMB to communicate to the network. Any thoughts?

Thanks Kurt. We are attempting to find the cause of the notorious two-minute spinning beachball delay. Not sure if you are aware of this problem, but it holds up Finder, Adobe InDeisgn, and other applications for two minutes while it is waiting for a response from a windows server. It shows in the log as:
1/4/12 3:29:25 PM
kernel
smb_iod_sendall: Timed out waiting on the response for 0xa0 mid = 0x3b
Very frustrating. While Lion seems to have fixed the issue for some users, EMC is telling us that Lion will not play nice with the Celerra share we use.

Similar Messages

How can I determine what computers are home sharing??

How can I determine what computers are home sharing??

Launch iTunes on the computers you're interested in. Check in the "Advanced" menu.
If "Turn on Home Sharing" is listed as an option, the iTunes library that you have open is not Home Sharing.
If "Turn off Home Sharing ([accountname]) is listed as an option, the iTunes library that you have open is Home Sharing.

How do i see what applications are running in the background

My iMac is running very slow my operating system is OS X Yosemite Version 10.10.2 with a 2.5 GHz Intel Core i5 Processor. How do I see what applications are running in the background?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Unable to shut down imac. dialogue - The Finder can't quit because some operations are still in progress. How do I determine what operations are still running?

I have an iMac (Mid 2007) Intel with Mac OS Lion 10.7.4 For some reason I am unable to shut down my computer. The dialogue box says The Finder can’t quit because some operations are still in progress. How do I determine what operations are still running? I have no clue? Obviously not a sophisticated user.

Thank You! Solved my problem. Have a great week.

How do I spot what images are RGB using the separations preview?

2 Questions: 1. How do I spot what images are RGB using the separations preview? 2. Is there an easy way to convert those to CMYK without opening each one in PS? I did this before all the time but I'm rusty and can't remember how I did it. I'm on CS6.

You can one of several methods to find out:
(1) You can use the Links panel. Open the Links panel. Go the panel menu and choose Panel Options. In the Panel Options dialog, Under Show Column check "Color Space". Now when you view your Links panel it will show the color space of all linked images.
(2) You could use Preflight, and set up a Preflight Profile. In the profile, go to the Color section > Color Spaces and Modes Not Allowed, and check RGB. Then any RGB images would be flagged.
(3) If you need to know BEFORE you place the images, use Adobe Bridge. Open the folder where the image are. Use the Metadata panel and view the color space of the images.

What application are you using for student collaboration?

The only part that is missing from iTunes University is real time student collaboration. What application are you using to bridge the gap? Thanks, Ed

Yeah, I'm not sure I know what you mean either.
Q: If you're asking which server-side code to use on Windows IIs Servers?
A: ASP or ASP.net and MSSql. Since Microsoft built these languages, you would get the best support from MS Expression.
If you're asking for software that helps you write code, you'll need to be more specific about which code you want to write and for what purpose.
Nancy O.

HT1918 how do you determine what devices are set up under homesharing

Does anyone know how you determine what devices are set up under homesharing? I am not finding a list of devices under my account.

Welcome to the Apple Community.
There are no lists, you'll need to check each device.

How do you determine what shows are in free video on demand?

How do you determine what to include in the free on-demand shows? The Mentalist was always there before but is no longer. This is especially important for shows like the Mentalist and The Good Wife which come on Sunday nights after sports events. Even if I set my DVR to record 60 minutes over it doesn't always catch the entire episode. Would also like to see Person of Interest there. And last but not least, you should have a way for people to access netflix or other services from your service.

If you go to BROWSE then the FREE folder you will find that everything in there is free viewing. If you go elsewhere and try to watch a paid show, you will get a prompt asking you to purchase. It also shows the amount of the movie before purchase.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

How do I determine what xtras are needed?

From the searching I have done it appears that xtras equired are mostly trial-and-error.
Is there an efficient way to determine what xtras are needed for each lindividual movie?
My programs are divided into a series of sequential movies. At the end of each movie
there is a goto statement to launch the next movie. Does that require me to determine
xtras for each separate movie?
In a perfect world there would be a way for Director to search a folder for and present an aggregate list of all xtras required for that set of movies.
If no such method exists, what is the recommended hunt and peck system?

Thanks for the response, rduane. But I refer to the procedures as a bit random for the reasons you mentioned in your explanation. For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it". And, yes, I know that it does add some automatically. But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra? If it needs it, why wasn't it added when it was built?
So, that's the reason I mentioned "trial and error", and "hunt and peck". The system is not reliable in its handling of xtras, or which ones are needed where. I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added, But that is all it tells you. It does not tell you if it has added all the xtras "needed". And when the error message comes up, it does name the missing xtra, but not which movie needs it. So, one has to go find the named xtra and copy it over to the Xtras folder.
At least, that's what I do to fix it. But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
Dewey-+

How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

When I go to Central Admin > Upgrade and Migration > Manage Databases Upgrade Status, I have 2 content databases which have the status:
Database is up to date, but some sites are not completely upgraded.
How can I determine which sites are not completely upgraded?

Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
using below PowerShell cmdlet.
Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
Get-SPDatabase | Format-Table Name, ID
Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
Test-SPContentDatabase WSS_ContentDB_Name
If you find any missing file issue in DB then resolve these issue to upgrade content database.
(verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
against a content database currently attached to the farm, or a content database that is not connected to the farm )
Use the Upgrade-SPContentDatabase cmdlet
to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
Upgrade-SPContentDatabase WSS_Content
reference:
http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

How do I determine what processes are running?

I'd like to determine what processes are running on my iMac running Mtn Lion. Is there an analog to Windows Task Manager?

Open the Activity Monitor in the /Applications/Utilities/ folder.
(76553)

How can I determine what computers are authorized on my iTunes account?

How can I determine what computers have been authorized on my iTunes account? I've reached my limit and now I'd like to deauthorize one computer.
Thanks,
Jerry

There is no list.
You can only deauthorize a single computer from that computer.
If you do not have access to the computers, then you would have to deauthorize all.

How do I determine what commands are associated to Priv 2 - 14

I don't want to create Command Authorisation sets just used a priv level. I'm having trouble determining what commands are assigned to what priv level?

By default, there are three command levels on the router:
privilege level 0 - Includes the disable, enable, exit, help, and logout commands.
privilege level 1 - Normal level on Telnet; includes all user-level commands at the router> prompt.
privilege level 15 - Includes all enable-level commands at the router# prompt
Commands at level 2-14 are blank by default BUT you always have access to all commands at your level and below so if you are at level 4 you have access to commands at levels 0 and 1
Hope that helps, rate if it does

How do i find what ports are being used.

I need to know how to tell what ports are being used and by what. I recently bought Apple Remote Desktop and have been pretty impressed but I have one computer here that won't let me Observe or Control. I think it is because the G4 in question has a program using port 5900. I need to confirm this is there any way that I can see if this port is being used?
Thanks
Moderith

Hi Moderith--
Welcome to the Apple Discussions.
Look in your Utilities folder for the Network Utility program. Open it, and choose "Port Scan" from the row of tabs in its window. If you're not running Network Utility on the problematic G4, use the G4's IP address. But if you're actually on the G4, use "localhost".
Note that if you check the open ports on the G4 from another computer, you won't see as many as if you check it from the G4 itself. That's because some ports are only local. For example, I have enabled the mail server on my Macs, but only to deliver mail, not relay it. So if I do a port scan using "localhost", I see port 25 open, but it's not open from another computer.
charlie

HT1420 How do I view what computers are authorized using my Apple ID?

I need to authorize a new computer but I already have five computers authorized...I cannot wait until I can deauthorize all five at once. How can I view what computers are currently authorized using my Apple ID?
Thanks!

There is no list available from your end. If needed, click here and request assistance.
(79232)

How do I determine what applications are communicating using SMB?

Similar Messages

Maybe you are looking for