How do I determine what my early termination fee will be?

My phone broke last week. The ear piece is distorted but it still works using a headset. I went into the store to see about fixing it. The don't work on LG Chocolates and I was told the replacement is an LG Extravert. I inquired about getting a new phone and using the value of the Extravert towards the new phone but was told they don't do that. I have been paying insurance on my phone for a couple years now and thought that meant I'd get a phone that was as good as my Chocolate. (removed) Since they would not work anything out with me(a 15 year customer with a family of 4 plan), I had them send me the Extravert. The store clerk said it was going to be there the next day. Apparently next day means over-the-weekend. So I was out of town the beginning of the week and didn't get to open the box until yesterday. The Extravert came incomplete with no battery nor back. It is also clown-red. The specs show it is clearly not an equal replacement for my Chocolate. Whatever... Anyway I got to argue with 2 Verizon reps on the phone about how it was not an equivalent phone for about an hour at one point being told that i had the option of selling the Extravert back to them for, much to my chagrin, $1. I pay $6 a month to insure my phone and they will send me a phone they value at $1!. I asked how much they would sell me the Extravert for and the rep said around $175! So you can probably see why I am not a happy customer. 15 years of loyalty and they can't do a thing to help me and don't seem to care. I realize it is not the person I talk to on the phones company and I am just one person so I am small potatoes. Again, whatever... So after the frustration of the last week, I have decided I need to end my relationship here and move on. So after venting, how does Verizon determine the early termination fee? Thanks in advance for your responses and a big no-thanks to Dorothy (removed) who was one of the exasperating folks I got to argue with for an hour yesterday...
Edited as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

You can't cancel service online.  However, if you  are moving to another carrier, start service with them and port your number - that will initiate the  cancellation from Verizon.  You also have to have an active line of service to port your number; if you cancel before starting service with someone else, your number is lost.
Backdating an increased data allowance is preferable and allowed - prorating is why you can't backdate a reduction.  It will most likely result in overages in a majority of situations, defeating the purpose of the reduction, so it is simply not possible to do.  The reduced allowance will take effect the next billing cycle.

Similar Messages

  • How do I find out what my early termination fee is?

    Hi,
    I was wondering if there was an easy way to locate my early termination fee?

    click here:
    Re: what is the early termination fee per line? I want to leave verizon.

  • Verizon does not want to honor early termination fee waiver! ANY ADVICE??

    So in september of 2013 I contacted verizon to complain about lack of service in my area, I finally decided to complain after my phone dropped a very important phone call I was having. After speaking with a verizon representative they issued a support ticket which came back saying I do in fact live in a marginal coverage area, the verizon rep offered a solution to me which was for me (and also noted on my account) to be able to to cancel my verizon service at any point and I would not be charged an early termination fee.  Between that day in september of 2013 and July of 2014 I had kept my verizon service as I tried to find a good phone company I would be able to switch to, I had also been able to do an upgrade on two of my lines as a verizon rep reccomended I take advantage of the free up grade to an iphone 5c.  Now with all that that's happened, I spoke to two different verizon representatives a few days before I switched over to T-mobile to make sure that my early termination fee will still be waived. I was assumred by BOTH reps that my fee will be waived with one of them literally telling me to ignore my next bill that will appear in the mail, sure enough I have received a bill of over $1,300 from verizon.  I contacted verizon today about the bill and the person I spoke to told me the early termination fee waiver does not apply to me as I only had 3 months from september 2013 to cancel my lines.
    First of all the original rep who put the note on my account did not tell me anything what so ever about having a 3 month window to cancel.
    Secondly, all the different verizon reps I talked to after that time in september all assured me that the early termination fee still applies to me.
    Thirdly, Just a FEW days before I cancelled my service I was told that I will NOT be liable for the bill the comes from my cancellation because of the termination fee waiver I had on my account.
    Verizon is trying to cheat me out of my money, I have been a loyal customer to them for over 4 years.  This is unacceptable and should be no way to treat a customer after being told by verizon reps I do not have to pay that bill.
    Has anyone been in this situation and if so how did you resolve it.  Verizon doesn't seem to be willing to listen to what I'm saying despite the multiple notes on my account.

        Pappiah,
    I definitely don't want you to feel like you are being taken advantage of. I will find out what is going on and get to the bottom of this for you. I am sorry to hear that you ended up leaving Verizon. I hope at some point in time you decide to come back to us. I would like to take a look at your account in depth. Please follow me and select the option to send me a private message. I have already followed you.
    StevenR_VZW
    Follow us on Twitter at @VZWSupport

  • ATT Early Termination Fee??

    Does anyone know what the early termination fee is for current ATT customers?  My fiance has ATT and loves his iPhone but hates their service--and their website is so confusing I can't find the early termination fee amount. I wonder if Verizon will offer any sort of "we'll pay you to switch" incentives???  I have Verizon and would never switch to ATT with him so we could share a plan...so this is AWESOME news!

    From the AT&T website:
    Question:
    What is the prorated (declining) Early Termination Fee? What is the prorated ETF? Answer:
    New and renewing AT&T wireless customers who entered into a 1- or 2-year Service Commitment prior to June 1, 2010, have an Early Termination Fee (ETF) of $175 less $5 for each full month of Service Commitment completed.
    New and renewing AT&T wireless customers who enter into a 1- or 2-year Service Commitment on or after June 1, 2010, and include certain specified equipment, have an ETF of $325, less $10 for each full month of Service Commitment completed. Otherwise the ETF is $150, less $4 for each full month of Service Commitment completed.
     Content reflects instructions for devices and services from AT&T. Some differences may exist for devices not purchased from AT&T.
    If your boyfriend doesn't remember the month that he started his contract, call AT&T for the exact amount.

  • Mi-Fi/Mobile Hotspot Early Termination Fee?

    I have a Verizon Mi-fi/Mobile Hotspot device that I'm paying $80/mo for and not currently using. Can anyone tell me what the Early Termination Fee(ETF) would be for this kind of device? The contract ends 8/2013

    $175 minus $5 per month of contract completed = $70 or $75 I think.

  • How do I determine what version of Apache I'm using?

    How do I determine what version of Apache, 1.3 or 2.0, I'm using?

    If you're using the stock Apache, it's 1.3 on regular OS X. I think it's Apache 2 on OS X Server, but I'm not certain.
    If you're asking because you've installed Apache 2, but want to make sure it's the one that's running and not the stock Apache, one way to tell is to examine the headers it returns. This Terminal command will show your headers (just enter it and hit the "return" key):
    <pre class="command">curl -I http://localhost</pre>
    Here's what I get:
    <pre class="command">HTTP/1.1 200 OK
    Date: Mon, 02 Jul 2007 13:09:06 GMT
    Server: Apache/1.3.33 (Darwin) PHP/5.2.0 mod_perl/1.29
    Content-Type: text/html</pre>
    As you can see, I have the stock Apache, but I've installed PHP5.
    charlie

  • Early Termination Fee - What will I be charged?

    I signed up with Verizon a few months ago but having some issues.  If I cancel now, am I only responsible for the $350 early termination fee and any usage for the current billing month?  Am I correct in assuming I would then own the phone and can also keep any rebates received when signing up?

        jshemphill
    I wouldn't want to lose you so soon.  What is the reason for wanting to cancel your contract?  The $350 termination fee is a lot of money and I want you to save it.  How can I help you restore our friendship? We are here to help.
    YareliM_VZW
    Follow us on Twitter at @VZWSupport

  • How much is the early termination fee?

    I'm trying to find out how much the early termination fee is. Does anyone know how much it is or where I can find it?

        I don't want to see you considering a move, Bull427. What has you searching for the termination fees? Our friend tikibar1is correct that the fee begins at $350 for smartphones and $175 for basic phones, each decreasing for each full month completed. You can see your contract by logging into My Verizon as the account owner and  selecting My Devices then View Contract End Date from the right side of the page.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Websites remembering you and automatically log you in is stored in a cookie.
    *Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    *Tools > Options > Privacy > Cookies: Exceptions
    In case you are using "Clear history when Firefox closes":
    *do not clear Cookies
    *do not clear Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

  • How can I determine what computers are home sharing??

    How can I determine what computers are home sharing??

    Launch iTunes on the computers you're interested in. Check in the "Advanced" menu.
    If "Turn on Home Sharing" is listed as an option, the iTunes library that you have open is not Home Sharing.
    If "Turn off Home Sharing ([accountname]) is listed as an option, the iTunes library that you have open is Home Sharing.

  • How Do I Determine What WUDFHost.exe is Doing and What It's Associated With?

    Since around the time of the installation of Win 8.1 Update 1 I've had a couple of new WUDFHost.exe processes that run all the time.  Today I saw one of them accessing data on a backup volume, which I assume was some kind of maintenance
    activity - but I'm not sure.
    My question is this:
    How can I determine what these processes are doing, why they're here, and what they're associated with (i.e., what feature or device has caused them to be running).  I don't suspect them of causing a specific problem - my system's running fine
    - but I want to know why they're running.
    Process Explorer shows them to have been started by these two command lines:
    "C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-ae18c507-xxxx-xxxx-xxxx-ce7a84b73fb2 -SystemEventPortName:HostProcess-76f2d2b0-xxxx-xxxx-xxxx-25de41b0af65 -IoCancelEventPortName:HostProcess-52988628-xxxx-xxxx-xxxx-54018fc05bec
    -NonStateChangingEventPortName:HostProcess-c981e37e-xxxx-xxxx-xxxx-a8bd344c5791 -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:8472fac1-xxxx-xxxx-xxxx-680353bbbc7f -DeviceGroupId:WpdFsGroup
    "C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-af2e6f5b-xxxx-xxxx-xxxx-39a9cc13f6d4 -SystemEventPortName:HostProcess-45e89330-xxxx-xxxx-xxxx-9e76811e37aa -IoCancelEventPortName:HostProcess-3007f65c-xxxx-xxxx-xxxx-c6cdd5617944
    -NonStateChangingEventPortName:HostProcess-efca4373-xxxx-xxxx-xxxx-cfc06fd83dee -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:f4aa6ef0-xxxx-xxxx-xxxx-d16f4eefddb2 -DeviceGroupId:WudfDefaultDevicePool
    As you can see, their function isn't obvious from what's showing.
    What tools can I used to delve further into what these are and why they're here?
    Thanks for any help or wisdom you can offer.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

    seems to me that you're about to dive down a rabbit hole for this one..
    http://en.wikipedia.org/wiki/User_Mode_Driver_Framework
    http://msdn.microsoft.com/en-us/Library/Windows/Hardware/ff557565(v=vs.85).aspx
    http://blogs.msdn.com/b/iliast/archive/2009/06/09/umdf-debugging-videos.aspx
    might need to ask more in the driver dev forums?
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How can I determine what is the minimum SCN number I need to restore up to.

    Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database?
    For example: I do a database restore.
    restore database ;
    RMAN> sql 'alter database open read only';
    sql statement: alter database open read only
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of sql command on default channel at 03/16/2009 15:00:04
    RMAN-11003: failure during parse/execution of SQL statement: alter database open read only
    ORA-16004: backup database requires recovery
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
    I need need to apply archive log files. All references I find for ORA-00194 state the solution is to "apply more logs until the file is consistent " But "HOW MANY LOGS", or more apporaite up to what time or SCN? How does one determine what TIME or SCN is required to get all file consistent?
    I thought this query might provide the answer, but it doesn't
    select max(checkpoint_change#)
    from v$datafile_header
    MAX(CHECKPOINT_CHANGE#)
    7985876903
    --It applies a bit more redo, but not enough to make my datafiles consistent.
    recover database until SCN=7985876903 ;
    Starting recover at 03/16/09 15:04:54
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    using channel ORA_DISK_3
    using channel ORA_DISK_4
    using channel ORA_DISK_5
    using channel ORA_DISK_6
    using channel ORA_DISK_7
    using channel ORA_DISK_8
    starting media recovery
    channel ORA_DISK_1: starting archive log restore to default destination
    channel ORA_DISK_1: restoring archive log
    archive log thread=1 sequence=18436
    channel ORA_DISK_1: reading from backup piece /temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1
    channel ORA_DISK_1: restored backup piece 1
    piece handle=/temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1 tag=TAG20090315T041716
    channel ORA_DISK_1: restore complete, elapsed time: 00:02:26
    archive log filename=/u01/app/oracle/flash_recovery_area/P1/archivelog/2009_03_16/o1_mf_1_18436_4vxd81yc_.arc thread=1 se quence=18436
    Oracle Error:
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
    I've discover I need to apply archive logs until this query reports all datafiles as FUZZY=NO , but this only works by guessing at some time periord to roll forward to, then checking the FUZZY column, and try again. Is there a way to know, I have to roll forward to a specific SNC in order for all my datafiles to be consistent?
    select file#
         , status
         , checkpoint_change#
         , checkpoint_time
         , FUZZY
         , RECOVER
    ,LAST_DEALLOC_SCN
    from v$datafile_header
    order by checkpoint_time
    Thanks,
    Jason

    The minimum point in time is the time when the last backup piece for datafiles in that backup was completed.
    Your alert.log should show the redo log sequence number at that time.
    You can query V$ARCHIVED_LOG and get the FIRST_CHANGE# of the first archivedlog generated after that backup piece completed.
    A
    LIST BACKUP;in RMAN should also show you the SCNs at the time of the backups.
    You can also query SCN_TO_TIMESTAMP -- eg
    select timestamp_to_scn(to_timestamp('15-MAR-09 09:24:01','DD-MON-RR HH24:MI:SS')) from dual;will return an approximation of the SCN.
    Hemant K Chitale
    http://hemantoracledba.blogspot.com
    Edited by: Hemant K Chitale on Mar 17, 2009 9:41 AM
    added the LIST BACKUP command from RMAN.

  • How do you determine what shows are in free video on demand?

    How do you determine what to include in the free on-demand shows?  The Mentalist was always there before but is no longer.  This is especially important for shows like the Mentalist and The Good Wife which come on Sunday nights after sports events.  Even if I set my DVR to record 60 minutes over it doesn't always catch the entire episode.  Would also like to see Person of Interest  there.   And last but not least, you should have a way for people to access netflix or other services from your service.  

    If you go to BROWSE then the FREE folder you will find that everything in there is free viewing. If you go elsewhere and try to watch a paid show, you will get a prompt asking you to purchase. It also shows the amount of the movie before purchase.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • How do I determine what the default font for equations is?

    In the Equation Fonts dialog box, we can set the font of Functions, Numbers, Strings, and Variables.  In those dropdown lists, there is a Default (para) Font choice.  How do I determine what font that is?  What paragraph tag is associated with an equation?
    With all the choices set to default, numbers types in the equation look similar (but not exact) to the Symbol font, but of course typing letters in the Symbol font reveal greek characters.  So is it some derivation of Symbol?

    Thanks.  That .cfg file shows Times Regular for the following characters, but none of these characters are the regular alphabet, (are they?) so there must be yet another place?
    mathchar.cfg    53      < plus        2b Times Regular>
    mathchar.cfg    54      < equal       3d Times Regular>
    mathchar.cfg    70      < gg          c8 Times Regular>
    mathchar.cfg    71      < ll          c7 Times Regular>
    mathchar.cfg    93      < fact        21 Times Regular>
    mathchar.cfg    94      < dagger      a0 Times Regular>
    mathchar.cfg    98      < minus       d0 Times Regular>
    mathchar.cfg    106      < uequal      3d Times Regular>
    mathchar.cfg    112      < diff        64 Times Regular>
    mathchar.cfg    116      < ucomma      2c Times Regular>
    mathchar.cfg    117      < semicolon   3b Times Regular>
    mathchar.cfg    118      < optotal     64 Times Regular>
    mathchar.cfg    127      < power       5e Times Regular>
    I've determined (by comparing equation string to body string visually) that Times is in fact the font being used.  I just don't see yet how that gets determined.  Any further thoughts?

  • How do I determine what URL to use when launching to display a RH10 .htm page?

    Hello,
    We are implementing RoboHelp 10 for our online documentation and are sourcing it from Framemaker 11. I am trying to determine exactly what URL information the developers need to build for the launch to the specific IBM System i screen. Is anyone launching RoboHelp from a backend ERP system? If so, how did you determine what level to use when building the URL for that page?  Thanks for any assistance you can provide.

    It depends on whether you just want to open the help at the default topic or open context sensitive topics.
    Both methods are described in Calling Help on my site and there is more good information at http://www.wvanweelden.eu
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for

  • The table has total different value than what I inserted!

    Hi, I have a table named "cfg2" and the structure of the table is like this. Name Null? Typ UID NOT NULL VARCHAR2(30) S1 VARCHAR2(10) S2 VARCHAR2(10) UIDFLAG NOT NULL NUMBER(1) I inserted "UID" values from 1 to 100 with preparedstatement. The code lo

  • Flash audio bug on Firefox Mozilla on PC

    - Quoted from Bugzilla@mozilla: https://bugzilla.mozilla.org/show_bug.cgi?id=289873 To see the problem, go to http://www.spellingcity.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.6) Gecko/20050317 Firefox/1.0.2 Build Identif

  • Is this a valid work around for disabled TextField Font colors?

    We would like to change the font color in disabled TextFields. Since the AWT calls some native code that apparently overrides any call to setForeground(), so that the Foreground is always a light gray color in disabled TextFields I decided to overrid

  • How can I find out

    Hello, I was sondering if anyone could tell me when Bt infinty is coming to my area, The exchanges are accpeting orders in my local area but it seems there is no "Big brother" symbol next to them. Is there any way to find out when they will actually

  • Copying Project

    Hi experts, I want help regarding the following scenario I have created a project in a plant say BP01, with WBS & Network assigned to BP01. Now I want to copy this project in another plant BP02. I have created different Project Profile and Network pr