How do i determine what my email server settings are?

My system is windows explorer 64 bit. I am connecting a scanner and need to know what is the type of my incoming server, my incoming mail server (PDP3, IMAP, HTTP), and my outgoing mail server SMTP. Where do i find this information. thanks [email protected]

See Gmail support for that information.

Similar Messages

Determining what the .MOV file settings are.

I have a program on my iMac I run to create slideshows and it creates .MOV files. I then transfer these .MOV files up to my website so people can see the slideshows.
On a older version of the program I use, when I look at the .MOV files on my iMAC (through the website) the video starts playing immediately and the download bar slowly fills up.
On the new version of the program I use, the .MOV file doesn't start playing on my iMAC until the file is completely downloaded.
I looked at the settings (to the best of my ability) with QuickTime Pro, and don't see anything obvious that is different. THe file created with the new version of the software is about 300K larger.
I am assuming there is a flag or something different between the two files. Is there any utility I can use which will take a .MOV file and list out the QuickTime settings for it?
Thanks,
Dennis

For some more information.....I am using Boinx softwares Fotomagico product. I placed both versions of the file created here: http://www.longnecker.me
For the .MOV file that was created with version 2.6.2 the show starts playing immediately.
For the .MOV file that was created with version 3.0.4, the show takes awhile before playing.
The difference is even more when the file is larger. The website, and the embed code is the same. THe only difference is the version of the Fotomagico software.
Any thoughts on why/how the file is different?

How can I determine what dns server the wifi client use within airport

How can I determine what dns server the wifi client use within airport
I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
Is there a possibility?
Thanks and happy eastern

The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

How do I determine what version of Apache I'm using?

How do I determine what version of Apache, 1.3 or 2.0, I'm using?

If you're using the stock Apache, it's 1.3 on regular OS X. I think it's Apache 2 on OS X Server, but I'm not certain.
If you're asking because you've installed Apache 2, but want to make sure it's the one that's running and not the stock Apache, one way to tell is to examine the headers it returns. This Terminal command will show your headers (just enter it and hit the "return" key):
<pre class="command">curl -I http://localhost</pre>
Here's what I get:
<pre class="command">HTTP/1.1 200 OK
Date: Mon, 02 Jul 2007 13:09:06 GMT
Server: Apache/1.3.33 (Darwin) PHP/5.2.0 mod_perl/1.29
Content-Type: text/html</pre>
As you can see, I have the stock Apache, but I've installed PHP5.
charlie

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Websites remembering you and automatically log you in is stored in a cookie.
*Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear Cookies
*do not clear Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

How can I determine what computers are home sharing??

How can I determine what computers are home sharing??

Launch iTunes on the computers you're interested in. Check in the "Advanced" menu.
If "Turn on Home Sharing" is listed as an option, the iTunes library that you have open is not Home Sharing.
If "Turn off Home Sharing ([accountname]) is listed as an option, the iTunes library that you have open is Home Sharing.

How Do I Determine What WUDFHost.exe is Doing and What It's Associated With?

Since around the time of the installation of Win 8.1 Update 1 I've had a couple of new WUDFHost.exe processes that run all the time. Today I saw one of them accessing data on a backup volume, which I assume was some kind of maintenance
activity - but I'm not sure.
My question is this:
How can I determine what these processes are doing, why they're here, and what they're associated with (i.e., what feature or device has caused them to be running). I don't suspect them of causing a specific problem - my system's running fine
- but I want to know why they're running.
Process Explorer shows them to have been started by these two command lines:
"C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-ae18c507-xxxx-xxxx-xxxx-ce7a84b73fb2 -SystemEventPortName:HostProcess-76f2d2b0-xxxx-xxxx-xxxx-25de41b0af65 -IoCancelEventPortName:HostProcess-52988628-xxxx-xxxx-xxxx-54018fc05bec
-NonStateChangingEventPortName:HostProcess-c981e37e-xxxx-xxxx-xxxx-a8bd344c5791 -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:8472fac1-xxxx-xxxx-xxxx-680353bbbc7f -DeviceGroupId:WpdFsGroup
"C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-af2e6f5b-xxxx-xxxx-xxxx-39a9cc13f6d4 -SystemEventPortName:HostProcess-45e89330-xxxx-xxxx-xxxx-9e76811e37aa -IoCancelEventPortName:HostProcess-3007f65c-xxxx-xxxx-xxxx-c6cdd5617944
-NonStateChangingEventPortName:HostProcess-efca4373-xxxx-xxxx-xxxx-cfc06fd83dee -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:f4aa6ef0-xxxx-xxxx-xxxx-d16f4eefddb2 -DeviceGroupId:WudfDefaultDevicePool
As you can see, their function isn't obvious from what's showing.
What tools can I used to delve further into what these are and why they're here?
Thanks for any help or wisdom you can offer.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

seems to me that you're about to dive down a rabbit hole for this one..
http://en.wikipedia.org/wiki/User_Mode_Driver_Framework
http://msdn.microsoft.com/en-us/Library/Windows/Hardware/ff557565(v=vs.85).aspx
http://blogs.msdn.com/b/iliast/archive/2009/06/09/umdf-debugging-videos.aspx
might need to ask more in the driver dev forums?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

How can I determine what is the minimum SCN number I need to restore up to.

Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database?
For example: I do a database restore.
restore database ;
RMAN> sql 'alter database open read only';
sql statement: alter database open read only
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 03/16/2009 15:00:04
RMAN-11003: failure during parse/execution of SQL statement: alter database open read only
ORA-16004: backup database requires recovery
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I need need to apply archive log files. All references I find for ORA-00194 state the solution is to "apply more logs until the file is consistent " But "HOW MANY LOGS", or more apporaite up to what time or SCN? How does one determine what TIME or SCN is required to get all file consistent?
I thought this query might provide the answer, but it doesn't
select max(checkpoint_change#)
from v$datafile_header
MAX(CHECKPOINT_CHANGE#)
7985876903
--It applies a bit more redo, but not enough to make my datafiles consistent.
recover database until SCN=7985876903 ;
Starting recover at 03/16/09 15:04:54
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
using channel ORA_DISK_5
using channel ORA_DISK_6
using channel ORA_DISK_7
using channel ORA_DISK_8
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=18436
channel ORA_DISK_1: reading from backup piece /temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1
channel ORA_DISK_1: restored backup piece 1
piece handle=/temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1 tag=TAG20090315T041716
channel ORA_DISK_1: restore complete, elapsed time: 00:02:26
archive log filename=/u01/app/oracle/flash_recovery_area/P1/archivelog/2009_03_16/o1_mf_1_18436_4vxd81yc_.arc thread=1 se quence=18436
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I've discover I need to apply archive logs until this query reports all datafiles as FUZZY=NO , but this only works by guessing at some time periord to roll forward to, then checking the FUZZY column, and try again. Is there a way to know, I have to roll forward to a specific SNC in order for all my datafiles to be consistent?
select file#
     , status
     , checkpoint_change#
     , checkpoint_time
     , FUZZY
     , RECOVER
,LAST_DEALLOC_SCN
from v$datafile_header
order by checkpoint_time
Thanks,
Jason

The minimum point in time is the time when the last backup piece for datafiles in that backup was completed.
Your alert.log should show the redo log sequence number at that time.
You can query V$ARCHIVED_LOG and get the FIRST_CHANGE# of the first archivedlog generated after that backup piece completed.
A
LIST BACKUP;in RMAN should also show you the SCNs at the time of the backups.
You can also query SCN_TO_TIMESTAMP -- eg
select timestamp_to_scn(to_timestamp('15-MAR-09 09:24:01','DD-MON-RR HH24:MI:SS')) from dual;will return an approximation of the SCN.
Hemant K Chitale
http://hemantoracledba.blogspot.com
Edited by: Hemant K Chitale on Mar 17, 2009 9:41 AM
added the LIST BACKUP command from RMAN.

How do you determine what shows are in free video on demand?

How do you determine what to include in the free on-demand shows? The Mentalist was always there before but is no longer. This is especially important for shows like the Mentalist and The Good Wife which come on Sunday nights after sports events. Even if I set my DVR to record 60 minutes over it doesn't always catch the entire episode. Would also like to see Person of Interest there. And last but not least, you should have a way for people to access netflix or other services from your service.

If you go to BROWSE then the FREE folder you will find that everything in there is free viewing. If you go elsewhere and try to watch a paid show, you will get a prompt asking you to purchase. It also shows the amount of the movie before purchase.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

How do I determine what the default font for equations is?

In the Equation Fonts dialog box, we can set the font of Functions, Numbers, Strings, and Variables. In those dropdown lists, there is a Default (para) Font choice. How do I determine what font that is? What paragraph tag is associated with an equation?
With all the choices set to default, numbers types in the equation look similar (but not exact) to the Symbol font, but of course typing letters in the Symbol font reveal greek characters. So is it some derivation of Symbol?

Thanks. That .cfg file shows Times Regular for the following characters, but none of these characters are the regular alphabet, (are they?) so there must be yet another place?
mathchar.cfg    53      < plus        2b Times Regular>
mathchar.cfg    54      < equal       3d Times Regular>
mathchar.cfg    70      < gg          c8 Times Regular>
mathchar.cfg    71      < ll          c7 Times Regular>
mathchar.cfg    93      < fact        21 Times Regular>
mathchar.cfg    94      < dagger      a0 Times Regular>
mathchar.cfg    98      < minus       d0 Times Regular>
mathchar.cfg    106      < uequal      3d Times Regular>
mathchar.cfg    112      < diff        64 Times Regular>
mathchar.cfg    116      < ucomma      2c Times Regular>
mathchar.cfg    117      < semicolon   3b Times Regular>
mathchar.cfg    118      < optotal     64 Times Regular>
mathchar.cfg    127      < power       5e Times Regular>
I've determined (by comparing equation string to body string visually) that Times is in fact the font being used. I just don't see yet how that gets determined. Any further thoughts?

How do I determine what URL to use when launching to display a RH10 .htm page?

Hello,
We are implementing RoboHelp 10 for our online documentation and are sourcing it from Framemaker 11. I am trying to determine exactly what URL information the developers need to build for the launch to the specific IBM System i screen. Is anyone launching RoboHelp from a backend ERP system? If so, how did you determine what level to use when building the URL for that page? Thanks for any assistance you can provide.

It depends on whether you just want to open the help at the default topic or open context sensitive topics.
Both methods are described in Calling Help on my site and there is more good information at http://www.wvanweelden.eu
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do i determine what the "other" usage is on my iPad (3.5 gig)

how do i determine what the "other" usage is on my iPad (3.5 gig)

Hey there, I seem to have an issue with the 'other' usage thing.
On my computer and ipod, it shows like this:
when I dont even have more than 2+GB in music and less than 1gb in apps and pictures.
I am on iOS5.1.1 because I had many problems with the Wi-Fi bug for iOS6 (no, it didnt fix for me with 6.0.1)
I am very frustatred because I cant even sync music anymore. AndI dont want to do a reset because it takes me 3+ hours to transfer my music.
any help}?

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

Yes I am considering switching from the VZ Edge to Sprint iPhone for Life plan.
Thanks,
Adrian
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

How do I determine what 4 computers are authorized to download content from my account?

How do I determine what 4 computers are authorized to download content from my account? I need to manage what computers are authorized.

You can only see a count of how many computers are authorised, you can't see a list of them. If the computers are also associated to your account (e.g. you've used iTunes Match, automatic downloads, or redownloaded past purchases on them) then they might also show in the 'manage devices' section of your account on your computer's iTunes (Store > View Account menu option): Manage your associated devices in iTunes - Apple Support
You can also, once every 12 months, log into account on your computer's iTunes (Store > View Account) and deauthorise all computers and then reauthorise the computers (which you can only do directly on them) that you still have and need.

How do i determine what my email server settings are?

Similar Messages

Maybe you are looking for