How do I determine which battery type I have?

Hello Everyone,
Is there a way of determining which battery model I have in my unibody 13" Macbook Pro?
I know there are different models like A1185, MA561, MA566 etc.
I didn't see any of these numbers listed in the system profiler.
Any help would be greatly appreciated.

This looks like it's the A1322.
http://www.ifixit.com/MacBook-Parts/MacBook-Pro-13-Inch-Unibody-Mid-2009-Battery /IF163-003
Regards

Similar Messages

How can I determine which generation ipad I have?

how can I determine which generation ipad I have. It was a gift last year.

Click here for information.
(73309)

I've been reading blogs, how do you determine which generation imac i have. bought 1/02/11. model id=iMac11,3 Mac OS X 10.6.8

who do you determine which imac you possess. I read about g2, g3, g4.

You have an intel Mac, the G prefixes are for PPC Macs. Go to About this Mac under the in the Menu Bar, it will give you the exact designation of your Mac.

How do I determine what connection type I have?

After almost a year of spotty service and lots of time spent on the phone with tech support, an AT&T tech came to our house and set up our dsl modem in a bedroom on the same side of the house where the lines feed in from the street. That modem hooks into the phone jack in the wall, and the desktop is plugged into a power outlet (using an adapter the technician gave us) on the other side of the house. He said that our signal now runs on the electrical wiring rather than on the phone line. We can use the adapter to plug the desktop or other corded device into any electrical outlet in the house now, and our service is perfect. Super fast and never out.
When we attempted to hook up the WRT54GS, we hooked it into the adapter where the desktop lives, then connected the desktop to the router. All the right lights were on, the connection icon in the bottom taskbar showed a strong signal, but we still get a windows message saying the signal can't be connected. I'm thinking that our unusual internet signal is something other than the default setting on the router and that is what's causing our problem.
Has anyone experienced and solved similar?
Thanks so much. . .

What you have is In-House Broadband over PowerLines (BPL). This is a new technology that I think is exremely cool. It runs at 500 kilobits to 3 megabits. im guessing that you live in one of the cities that they are trying it out. As far as setting up your router to that technology I have no idea.This link will take you to a router that is specifically designed for BPL http://www.niroda.com/index.php?option=content&task=view&id=159&Itemid=153. I hope that this was a little bit helpful.
Cheers

How may I determine which listener setup we have?

Hello,
Is there a query or any other status/information mechanism to inform me of the listener setup we have with our APEX installation?
I will soon need to upgrade to 2.0.
Thank you,
Ghyslain

Hi jrector3,
You need to go to the respective machines and launch Acrobat and check if it prompts for serial number.
You can also go to the help menu and check if 'Deactivate' option is highlighted.
Regards,
Rave

How do I determine which version of Firefox I currently am running?

How do I determine which version of Firefox I am currently running on my laptop? I use Quickbooks Online and I keep getting a message that they will shortly discontinue supporting the version of Firefox that I have.

Help > About Firefox
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.18) Gecko/20110614 Firefox/3.6.18 ( ) = '''3.6.18''' - but that '''( )''' doesn't belong there and Quickbooks Online might be misreading your UserAgent as a result of that ( ) being there.
Try resetting your UserAgent string. 
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter 
''If you see the warning, you can confirm that you want to access that page.'' 
Filter = '''general.useragent.''' 
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. 
Then restart Firefox

Mailexample.sql how do you determine the file type?

I'm using the mailexample.sql which explains how to use the demo_mail wrapper package for utl_smtp. There's a procedure for attaching text files and a procedure for attaching binary files. I've got binary files to attach to email successfully.
How can I determine the file type so that I can use the attach_text procedure when attaching text files rather than the procedure for attaching binary files?
Sandy

Watch out! I think there is a bug in that code :-
bug with PL/SQL Sample - maildemo.sql
To answer your question - the usual way of determining a file type is to look for 'magic numbers' in the file that indicate its type. For example, Windows exe files often (always?) begin with the two letters 'MZ'. Zip files begin with 'PK'; Rar archives begin with 'Rar!'. Text files can begin with anything, and do not have any characteristic marker, but USASCII7 (which is what the format that routine is designed for - I think), is a characterset that only uses the first 7 bits of the byte. You could read the file, and if you find any bytes > 127, then you know it is not a USASCII7 file. I have seen various programs that 'sample' the first 64 or 256 bytes of a file instead of reading the whole file, and they usually get it right.
Hope this helps.
Takmeister

How can I determine which image was clicked in 3D carousel?

I have been modifying some 3D carousel code that I found in hopes that I can get it such that when image "resolv2.jpg" (or any of my other images) is clicked on at the front of my carousel, it goes to a specific webpage. By just replacing "moveBack(event.target) from the toggler section of the code with "navigateToURL:(newURLRequest('http://google.com'), the target DOES sucessfully go to google when clicked on. However, I want to modify this code by altering the else statement to say something to the effect of "else if event.target (clicked on object) is 'resolv2.jpg' THEN go to google". So essentially, my question is how can I determine which image was clicked? Here is the entire code with the area I was altering bolded:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" applicationComplete="init();" backgroundGradientColors="[#000033, #000033]" backgroundGradientAlphas="[1.0, 1.0]">
<mx:Script>
 <![CDATA[
//Import Papervision Classes
 import org.papervision3d.scenes.*;
 import org.papervision3d.cameras.*;
 import org.papervision3d.objects.*;
 import org.papervision3d.objects.primitives.*;
 import org.papervision3d.materials.*;
 import org.papervision3d.materials.shadematerials.*;
 import org.papervision3d.materials.utils.MaterialsList;
 import org.papervision3d.lights.*;
 import org.papervision3d.render.*;
 import org.papervision3d.view.*;
 import org.papervision3d.events.*;
 import org.papervision3d.core.*;
 import org.papervision3d.lights.PointLight3D;
 import flash.filters.DropShadowFilter;
 import caurina.transitions.*;
 private var numOfItems:int = 5;
 private var radius:Number = 600;
 private var anglePer:Number = (Math.PI*2) / numOfItems;
 //private var dsf:DropShadowFilter = new DropShadowFilter(10, 45, 0x000000, 0.3, 6, 6, 1, 3);
 public var angleX:Number = anglePer;
 public var dest:Number = 1;
 private var theLight:PointLight3D;
 //Papervision Engine
 private var viewport:Viewport3D;
 private var scene:Scene3D;
 private var camera:Camera3D;
 private var renderer:BasicRenderEngine;
 private var planeArray:Array = new Array();
 [Bindable]
 public var object:Object;
 private var arrayPlane:Object;
 private var p:Plane;
 //Initiation function
 private function init():void
 viewport = new Viewport3D(pv3dCanvas.width, pv3dCanvas.height, false, true);
 pv3dCanvas.rawChildren.addChild(viewport);
 viewport.buttonMode=true;
 renderer = new BasicRenderEngine();
 scene = new Scene3D();
 camera = new Camera3D();
 camera.zoom = 2;
 createObjects();
 addEventListeners();
//Create Objects function
 private function createObjects():void{
 for(var i:uint=1; i<=numOfItems; i++)
 /* var shadow:DropShadowFilter = new DropShadowFilter();
 shadow.distance = 10;
 shadow.angle = 25; */
 var bam:BitmapFileMaterial = new BitmapFileMaterial("images/resolv"+i+".jpg");
 bam.oneSide = false;
 bam.smooth = true;
 bam.interactive = true;
 p = new Plane(bam, 220, 200, 2, 2);
 p.x = Math.cos(i*anglePer) * radius;
 p.z = Math.sin(i*anglePer) * radius;
 p.rotationY = (-i*anglePer) * (180/Math.PI) + 270;
 scene.addChild(p);
 //p.filters=[shadow];
 p.extra={pIdent:"in"};
 p.addEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
 planeArray[i] = p;
 // create lighting
 theLight = new PointLight3D();
 scene.addChild(theLight);
 theLight.y = pv3dCanvas.height;
 private function toggler(event:InteractiveScene3DEvent):void
 // if the cube's position is "in", move it out else move it back
 if (event.target.extra.pIdent == "in")
 moveOut(event.target);
 else
 moveBack(event.target);
 private function moveOut(object:Object):void
 trace(object +" my object");
 // for each cube that was not selected, remove the click event listener
 for each (var arrayPlane:Object in planeArray)
 if (arrayPlane != object)
 arrayPlane.removeEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
 //right.enabled=false;
 //left.enabled=false;
 // move the selected cube out 1000 and rotate 90 degrees once it has finished moving out
 Tweener.addTween(object, {scaleX:1.2, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
 Tweener.addTween(object, {scaleY:1.2, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
 // set the cube's position to "out"
 object.extra = {pIdent:"out"};
 // move the camera out 1000 and move it the to same y coordinate as the selected cube
 //Tweener.addTween(camera, {x:1000, y:object.y, rotationX:0, time:0.5, transition:"easeInOutSine"});
 private function moveBack(object:Object):void
 // for each cube that was not selected, add the click event listener back
 for each (var arrayPlane:Object in planeArray)
 if (arrayPlane != object)
 arrayPlane.addEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
 // move the selected cube back to 0 and rotate 90 degrees once it has finished moving back
 Tweener.addTween(object, {scaleX:1, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
 Tweener.addTween(object, {scaleY:1, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
 // set the cube's position to "in"
 object.extra = {pIdent:"in"};
 // move the camera back to its original position
 //Tweener.addTween(camera, {x:0, y:1000, rotationX:-30, time:0.5, transition:"easeInOutSine"});
 //right.enabled=true;
 //left.enabled=true;
 private function goBack():void
 // for each cube that was not selected, add the click event listener back
 for each (var arrayPlane:Object in planeArray)
 if (arrayPlane != object)
 arrayPlane.addEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
 private function rotateCube(object:Object):void
 //object.rotationX = 0;
 //Tweener.addTween(object, {rotationZ:0, time:0.5, transition:"easeOutSine"});
 private function addEventListeners():void{
 this.addEventListener(Event.ENTER_FRAME, render);
//Enter Frame Listener function
private function render(e:Event):void{
 renderer.renderScene(scene, camera, viewport);
 camera.x = Math.cos(angleX) * 800;
 camera.z = Math.sin(angleX) * 800;
private function moveRight():void
 dest++;
 Tweener.addTween(this, {angleX:dest*anglePer, time:0.5});
 //goBack();
private function moveLeft():void
 dest--;
 Tweener.addTween(this, {angleX:dest*anglePer, time:0.5});
 //goBack();
 ]]>
</mx:Script>
 <mx:Canvas width="1014" height="661">
 <mx:Canvas id="pv3dCanvas" x="503" y="20" width="400" height="204" borderColor="#110101" backgroundColor="#841414" alpha="1.0" backgroundAlpha="0.57">
 </mx:Canvas>
 <mx:Button x="804" y="232" label="right" id="right" click="moveRight(),goBack()"/>
 <mx:Button x="582" y="232" label="left" id="left" click="moveLeft(),goBack()" />
 </mx:Canvas>
</mx:Application>

Your answer may be correct, but I am very much a beginner to actionscript, and I was wondering moreso if it is possible to determine the root/url (i.e. images/resolv2.jpg)? Or even if InteractiveScene3DEvent calls a variable that holds this url? However, specifically, I'm just wondering if the actionscript itself could determine the url in a line of code such as "if object == BitmapFileMaterial("/images/resolv2.jpg"); "? Also, here's a copy of InteractiveScene3DEvent in more detail if you think that will help:
public class InteractiveScene3DEvent extends Event
 * Dispatched when a container in the ISM recieves a MouseEvent.CLICK event
 * @eventType mouseClick
 public static const OBJECT_CLICK:String = "mouseClick";
 * Dispatched when a container in the ISM receives an MouseEvent.MOUSE_OVER event
 * @eventType mouseOver
 public static const OBJECT_OVER:String = "mouseOver";
 * Dispatched when a container in the ISM receives an MouseEvent.MOUSE_OUT event
 * @eventType mouseOut
 public static const OBJECT_OUT:String = "mouseOut";
 * Dispatched when a container in the ISM receives a MouseEvent.MOUSE_MOVE event
 * @eventType mouseMove
 public static const OBJECT_MOVE:String = "mouseMove";
 * Dispatched when a container in the ISM receives a MouseEvent.MOUSE_PRESS event
 * @eventType mousePress
 public static const OBJECT_PRESS:String = "mousePress";
 * Dispatched when a container in the ISM receives a MouseEvent.MOUSE_RELEASE event
 * @eventType mouseRelease
 public static const OBJECT_RELEASE:String = "mouseRelease";
 * Dispatched when the main container of the ISM is clicked
 * @eventType mouseReleaseOutside
 public static const OBJECT_RELEASE_OUTSIDE:String = "mouseReleaseOutside";
 * Dispatched when a container is created in the ISM for drawing and mouse interaction purposes
 * @eventType objectAdded
 public static const OBJECT_ADDED:String = "objectAdded";
 public var displayObject3D :DisplayObject3D = null;
 public var sprite :Sprite = null;
 public var face3d :Triangle3D = null;
 public var x :Number = 0;
 public var y :Number = 0;
 public var renderHitData:RenderHitData;
 public function InteractiveScene3DEvent(type:String, container3d:DisplayObject3D=null, sprite:Sprite=null, face3d:Triangle3D=null,x:Number=0, y:Number=0, renderhitData:RenderHitData = null, bubbles:Boolean=false, cancelable:Boolean=false)
 super(type, bubbles, cancelable);
 this.displayObject3D = container3d;
 this.sprite = sprite;
 this.face3d = face3d;
 this.x = x;
 this.y = y;
 this.renderHitData = renderhitData;
Thank you so much!

How can I determine which profile Firefox 5 is currently using?

How can I determine which profile Firefox 5 is currently using?

in address bar type:
'''''about:cache'''''
and look at '''''Offline cache device -> Cache Directory'''''

How can I determine which computer a share is connected to in /Volumes from terminal or a script?

I run a set of virtual machines via Fusion on an iMac that we run automated tests on for our website. There is a folder on each VM called /Automation that is shared.
I have a python script that runs on the host, that will find an open VM, start it up and then mount the VM's /Automation folder. So if there is only 1 VM powered on, the folder shows up in /Volumes as /Volumes/Automation. The problem is when there are 2 or more VM's powered on, because then the shares start being named /Volumes/Automation-1 and Automation-2 etc. So my question is, how can I determine which computer each share belongs to from terminal or a script?
In other words, I'm looking for something like:
/Volumes/Automation = "FirstVirtualMachineName.local"
/Volumes/Automation-1 = "SecondVirtualMachineName.local"
Is there any way to determine which computer a mounted share is connected to? In the past, I've just unmounted all /Automation folders, and then mounted them in a particular order, but that's unreliable and messy in my opinion. If anyone knows a better way, please let me know. Any help is appreciated.
Thanks,

Well I think I have a workable solution. It's not perfect, but I think it will do the trick. I can put a spotlight comment on the folder similar to 'HostName=OSX-Automation-1.local' and can then retrieve that value from our server with the following python snippet:
import subprocess
out,err = subprocess.Popen(['osascript','-e','tell application \"Finder\" to get comment of \"Macintosh HD:Volumes:Automation-1\"'],stdout=subprocess.PIPE, stderr=subprocess.PIPE).communciate()
So I could just loop through each 'Automation*' folder in /Volumes and grab the name from the spotlight attributes on the directories. I don't think I really need to worry about the comments being overwritten, but I may have one of our launch daemons that run on the VM check that spotlight comment once a minute or something to ensure that the correct value is there.
If it ends up not working well in practice, I'm going to give your suggestion about a config script a shot. It would require a little more up front work, but seems as if it would be pretty solid after that.
Thanks again for helping me think it through

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

Create a smart collection with criteria "collection" and "does not contain"; and also with criterion Folder contains (or folder contains all)
That works if you are thinking about a specific named collection.
If you are interested in finding photos that are not in ANY collection, the usual trick is "collection" "does not contain" "a e i o u y"

How can I determine which jobs are running on NT?

Hello,
How do I determine which processes are in execution on an NT box from a JAVA
application? I figure it must involve runtime exec'ing some run32dll
program, but which one?
TIA

Search microsoft.com, or MSDN. That isn't anything to do with Java Programming.

How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

I store different channels in a TDMS file.
I like to have a time channel at the first position with group index 1 and number 1.
When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
Here are my questions:
How does DIADEM import TDMS files?
How gets every channel his number and groupindex?
How can I determine which channel has which groupindex and number?
Best regards
Joerg

Hi Jörg,
i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
Did you use the library for creating *.tdms files like in the link ?
http://zone.ni.com/devzone/cda/tut/p/id/6471
Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
german version download link
https://lumen.ni.com/nicif/d/lveval/content.xhtml
english version download link
https://lumen.ni.com/nicif/us/lveval/content.xhtml
Hope it helps
Best Regards

How can I determine which machines have activated Adobe Acrobat Standard 9?

How can I determine which machines have activated Adobe Acrobat Standard 9?

Hi jrector3,
You need to go to the respective machines and launch Acrobat and check if it prompts for serial number.
You can also go to the help menu and check if 'Deactivate' option is highlighted.
Regards,
Rave

How do I determine which version of OS I have on my old iphone 3gs--so I can determine if I can set up Icloud?

how do I determine which version of OS I have on my old iphone 3gs--so I can determinw whether I can set up Icloud? thx

Settings > General - About.
If the iPhone is up to date, go to Settings and you will see a setting for iCloud.

How do I determine which battery type I have?

Similar Messages

Maybe you are looking for