How do I direct my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

How do I add my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

Hi,
Given your ptinter supports print from Android, you need an app called HP ePrint. Please use Google Store to install it:
https://play.google.com/store/apps/details?id=com.hp.android.print
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How do I direct my HP 5510 e-all-in-one scan output to an Android tablet

How do I direct my HP 5510 e-all-in-one-printer scan output to an Android tablet? My printer is connected to my wireless network. During the printer setup I was able to identify both my desktop and laptop computers as "scan to" computers and they both appear as destinations on the printer display. I have been able to direct the printer scans to these two computers without problems. But I have not been able to find a way to direct the scan output to my Android tablet (Android Honeycomb 3.2.1). I have downloaded and use HP ePrint Home and Biz app and can print from the tablet. This app does not appear to offer a way to direct the printer scan output to be sent to the tablet. Any suggestions???
This question was solved.
View Solution.

Hi,
Currently, HP does not provide any scanning solution for Android OS.
Scanning from the front panel will allow you to scan to a computer only, and not to any mobile OS.
I would suggest you to search the Android Market for any 3rd party scan application, as the HP ePrint Home & Biz app currently provide scan capabilities for Apple iOS and Nokia Symbian as you may find listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02532765&cc=us&dlc=en&lc=en&product=5063582&tmp...
Hope it helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I get my HP Photosmart e-All-IN-ONE D110 to Install on my New HP Pavillion p7-1423w PC?

When I put the Install Disc into my new computer I get the page that only has an EXIT button. No INSTALL choice.
This computer has a 64 bit operation system and Windows 8.

Depending on when that printer was released, the installation disc might not include the right drivers for Windows 8. Try going to the software and driver downloads page for your model, select your specific model and operating system, and download the correct software and drivers from there.
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
Operating System: Windows Version 8.1 PRO
When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
stop working. Is this printer not compatible with Windows 8.1 PRO? Is there any update for this?

Hey,
HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
Please uninstall your printer's old software then install new one for windows 8.1.
HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

How to Clean Ink Stains on HP 3050 All-in-One J610 series

Hello -
I have an HP Deskjet 3050 All-in-One J610 series printer. I am a Mac User and am getting notifications with each document I print that I need to "Clean Ink Stains on Printer". I have put brand new black and tricolor HP ink cartridges, but I am still getting some faded streaks in the documents I print. I think the "ink stains" are specifically on the printer and not related to the ink cartridges, since I have put new ones in and the situation has not been resolved.
Do you have a video or step by step instructions on how to clean these ink stains on the printer so I no longer have faded sections when I print? My ink cartidges are full and new. I have had this printer for 3.5 years and have never seen this notification, nor have I ever cleaned the inside of the printer.
Thank you for your help.

Hello Macuser0210,
I am sorry to hear that you are having issues with faded streaks on your documents.
I found the following on HP.com. Solution Seven in the document might help you resolve your issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02206095&tmp_task=solveCategory&cc=us&dlc=en&la...
Regards,
Lynn_B
I work on behalf of HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

How do I change my HP Deskjet 3050A All-In-One J611 Series to draft mode

How do I change my HP Deskjet 3050A All-In-One J611 Series to draft mode? I have read some of the "solutions," but they don't make any sense to me. I need simple instructions. Thanks!

Hi there!
Try these steps that I have posted below. This will change the settings for all print jobs, so you will need to go back in to these settings if you wish to change the quality back to normal, best, etc.
Source
Once you are in the Printing Preferences window, you will see a Paper/Quality tab, click on it and you can change the Quality to Draft here.
That should work for you! Let me know if this helps
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I get my HP Photosmart C6280 All-In-One to scan?

I have updated to Mac OS 10.9 the driver for my HP Photosmart C6280 All-In-One, but the scanner function no longer works. The Apple update list shows the update was performed on October 30.
The printer does not show up in the list of printers as a "Bonjour" printer, as the instructions from HP's website indicate it should.

Hi there,
I understand you're having issues printing/scanning with your Photosmart C6280 since upgrading the 10.9 on your Mac. I would like to help you with this as best I can.
The reason your having issues is because the HP software you're using is not designed for the 10.9 operating system. The last full software package HP released for the Photosmart C6280 was for 10.6, so the best option at this point would be to use the in operating system drivers.
To get everything to work properly again, I'm going to link you to how to completely remove the HP software so you can use the Apple software as Sunshyn2005 has described in her post. Once you follow those steps to begin using the Apple software you may not know how to scan using the Apple software and you can learn 3 different ways to do so.
I hope this helps, have a great weekend!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Photosmart 3310 all in one won't print.

HP diagnostic tool says everything is fine, but my photosmart 3310 all in one just won't print. Using OS Vista 64

Hi ljwzx,
Can you print the self test page from the printer?
How to print a self test page from the printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00409857&tmp_task=useCategory&cc=us&dlc=en&jump...
I am not sure which Diagnostic utlity you used previously. I have included the two which should assist with your printing issue. Try the Print Diagnostic utility first.
Print Diagnostic Utility:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91799-1&cc=us&dlc=en&lc=en&...
Network Diagnostic Utility:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-96434-1&cc=us&dlc=en&lc=en&...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Photosmart C4180 All-in-One. While printing it stopped and the power button is orange. Nothing works

Hi, I have a Photosmart C4180 All-in-One. So far it worked perfectly.
Tonight I had to print a few pages and right in the middle of it, it stopped leaving the page halfway.
Also the on/off button stays orange and there is an exclamation point underneath it.
I removed the page and turned off the power by removing the plug (pressing the on/off button didn't work).
While putting the plug back in, the power came on again... but the on/off button remains orange. Nothing works.
Does anybody recognize this problem and/or does anybody have a solution for this?
Thank you,
Dutchfox

Hi , I understand that you are having issues printing and scanning. I would be happy to help you.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.HP Photosmart (D110), Photosmart Wireless (B110), and Photosmart Ink Advantage (K510) e-All-in-One Printer Series - Printing a Network Configuration Page. Check to see if you still have a valid IPv4 address. If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IPv4 address into your web browser's address bar. (Safari)Did it load the web page? If you were able to access the printer's Embedded Web Server, please try the following steps: Repair the Disk Permissions on the Mac:Close all applications.On the Apple menu bar, click Go, click Applications and then click Utilities.Double-click Disk Utility.Highlight your hard drive/partition on the left.Click Verify and then Repair Disk Permissions. Restart the computer.. Reset the Printing System: Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button. If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

How do I scan from my hp photosmart plus e-All-In-one B210 series printer

I have a hp photosmart plus e-All-in-one printer and have tried to scan to my Mac 10.6.8 desktop computer.

You might need to install software from HP for your printer.

How to install a hp deskjet all-in-one j510 series printer

I am trying to install a new printer for my laptop. The CD that came with the printer only works with Windows. I need to know how I can install it.

Hi, Yesterday I bought the above printer and installed it on my Windows XP but when I click for the printer to print there is an error messsage that comed up bizsupport2.austinhp.. I have no idea what this means all I know is my printer is not printing
Can someone please give me any help
Thanks

EPrint and Network Problems Photosmart All-In-One D110 Series

Hello,
Any help would be extremely appreciated as I have spent several days trying to figure this out with not much prevail! My product installation said installed properly. Blue wireless light is on in front of printer. Shows onine and ready in printers and devices on control panel. For quite a few days I could get it to print from PC but not take advantage of wireless features. I could not set up web services as it gave me an error saying "no connection". FINALLY!!!... by setting up a manual I.P. in network settings for the printer I was able to set up web services. I installed iPrint on my Android and that works wonderful. However, I cannot print from email. When I open ePrint it still shows offline. When I open my network map it shows my printer at the bottom of the page and says "The following discovered device can not be placed in the map." I have run all the diagnostics and all come out successful. The network diagnostic kept saying my McAfee was blocking the printer. I've read and read and reread the directions on how to solve this. Thought I've allowed all HP permissions and ports and still McAfee blocks my printer. When I disable McAfee network diagnostic completes successful. However, with McAfee disabled, I still have the other troubles. And now the diagnostic for network will not even open it shuts down with an error unable to finish program. I am running Windows 7. I have the wireless printer installed with no USB. I have a DSL cable and a Linksys router. If someone can please help me. I bought this thing along with new computer 2nd week in Feb. and have not been able to get it working properly and am ready to tell HP to take it away!! I haven't even been able to enjoy my new computer with all this installing - reinstalling - reading forums - talking with tech support. THANK YOU!!!!

Is your windows up to date (do WIndows Update over and over until there are no more) and your McAfee up to date? This seems like a Windows or HP software thing to me.
I assume uninstalling and reinstalling does not do the trick?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart C6180 All-in-One won't print magenta or light magenta, even with new cartridges

The printer suddenly stopped printing magenta and light magenta. I installed new cartridges from LD, which have always worked in the past, but none worked. No error messages.

Hi there @Optical32 and welcome to the forums
I read about how your Photosmart C6180 is no longer printing in light magenta and magenta, with no error messages. I'd like to offer my suggestion for you that may help.
Click this link and try these steps: Color Mix or Missing Colors on the Diagnostic Page
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hp photosmart premium all in one won't print avery labels?

HI, When I put a sheet of labels in (avery templete 5160) the printer spits out the label page and prints the info on regular paper? I don't see any place to change paper to 'labels' on my printer. Does someone know how to fix this? thank you and Merry Christmas.

Laura,
There are quite a few trouble shooting steps in my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0]. But to cut to the chase, first make sure you can run one of the Apps on the Printer and its getting content. Then make sure the firmware is the latest (Tools->Web->Automatic Updates->Check for Product Updates). Then power cycle everything (Router, Printer, iOS device). If it's still not working, more likely then not its a problem with your wireless router and Bonjour, so post back what brand of router you have, the model, and how your network is configured.
Just trying to help.
Andrew

HP Photosmart 7520 all in one showing Air Print Macbook Pro Maverick 10.9.4

At one point I did not have Air Print showing beside printer in system preferences. Printer and scanning is working fine, but I was told by someone on this message board that Air Print should not show. How do I remove Air Print. I have a Macbook Pro Maverick 10.9.4. HP Scan version 4.1.1. I did an update earlier this year and the Air Print was not there. Did not see board for Mac to choose for issue. Thanks for your help.
This question was solved.
View Solution.

Good morning, happy Friday @ladybugs48
I understand you are seeing AirPrint next to your printer, meaning you are currently using the AirPrint driver and not the HP driver. I can help you change this. Please complete the steps below;
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
When you add the printer, to ensure you are using the HP driver, not the AirPrint driver use the steps below;
Select Add Other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer driver
Please let me know if this resolves the issue. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How do I direct my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

Similar Messages

Maybe you are looking for