How do I disable auto-launch of third party applications (i.e. TeamViewer) at startup?

I've loaded a few third party applications like TeamViewer which installed themselves as startup applications which I cannot disable in the system preferences login items. The obvious answer is don't load these apps but that being said, how do I disable them now that they are loaded without uninstalling to prevent them from launching automatically during startup. I can quit them after they launch but I'd like to prevent them from auto-starting during startup. Any insight would be appreciated.

Look in TeamViewers preferences for this:
Uncheck it.

Similar Messages

How do i disable auto launch

Everytime i plug in my camera or Sony PSP iPhoto Launches, which is handy when thats what i need to do but i dont.. i've looked every where but cant seem to find the option to check! (i'm using version 2 if that matters)
HELP

Zoran
Go to the Applications folder and open Image Capture.
The preferences in Image Capture determine what happens when a camera or card reader is attached.
Peter

How to clear documents and data for third party applications

Anyone can help me how to clear the documents and data for apps like facebook , i tried to delete the app and re-install but there is no change , please advise ,
thank you.

Manage the data on the device via iTunes.

Configure sap xi with third party application?

Hi fredz,
Can any pls explain with technical details and steps how do i configure sap xi with third party application and what type of connectivity and interfacing communication channel is preffered?
Is there any option to web-services for interfacing between SAP system-SAP XI system-Third party Application.
Pls be specific if and only if u have done this scenario.
Regards,
Ameet
Message was edited by:
Ameet Jassani
Message was edited by:
Ameet Jassani

Hi
 
This is a very generic question. There are some getting started guides available in the main XI section on SDN, and also some step-by-step guides in the wiki section. A quick search will get you tons of information.
 
The choice of connectivity and interfacing communication channel is really dependent on the capabilities of the third party system.
 
Also, to get good results on this forum, please read the <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">rules of engagement</a>
 
Regards
Manish

How do i disable auto-start in Adobe Quick Launch; elements 3.0

how do i disable auto-start in Adobe Quick Launch; elements 3.0

I guess i don't remember that in photoshop elements 3, so could you explain a little more about what your asking?
What operating system are you using?
Unless your talking about the welcome screen that gives a choice of what to start when ckicking on the pse 3 shortcut (welcome screen, organizer or editor)
Window>Welcome in the editor or organizer
Or auto launching the adobe photo downloader when you have a camera or camera card connected.
Message was edited by: R_Kelly

How can I disable auto-switching desktops?

I've long appreciated the spaces/mission control feature of OS X. However, it seems more oriented to organizing desktops by application rather than by project.
Like many users, I suspect, I use different desktops for different projects, each of which requires a variety of applications (finder, word docs, spreadsheets, etc). When I'm working on project 1 in desktop 1, I never want to be whisked away to desktop 2. In fact, I never want to be switched to a different desktop automatically. If I click on an application, I want it to open a new window for that application. If a new iteration of an app can't be opened (ie, Mail), I'd like it to pull Mail to me rather than send me off to it. Aren't apps supposed to come when we call, not the other way around?
I have unchecked "...switch to a space with open windows of that application" in System Prefences, but my desktop continues to auto-switch, especially with Finder.
In short: is there a way disable auto-switching entirely? I'd like to be able to assign windows and navigate manually without being constantly pulled away from the project I'm working on.
Thanks for the help; I really appreciate people spending their time helping others on forums like this one.

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

How do i disable automatic launch of open programs on startup

how do i disable automatic launch of open programs on startup

It's the Resume feature.
When choosing Restart, Sleep or Shutdown there is a checkbox you can uncheck to prevent the apps from launching.
Also in System Preferences > General there is a hard-to-find checkbox under "Number of recent items" you can turn off.
Also, you can hold the shift key to disable resume on a one time basis.
You can turn off Resume globally by going to ~/Library/Saved Application State and deleting that folder.
(note that the User Library is hidden - one way to get there is to go to your Finder "Go" menu hold the option key to choose "Library")
To turn off autosave and versions globally
If you're experiencing slow opening apps or windows since upgrading to ML... as I have... and you don't want your OS to automatically save your TextEdit files, etc. then simply disable Autosave and Versions via Terminal.
If you don't want autosave or resume you can copy & paste this command into Terminal at the prompt...
defaults write -g ApplePersistence -bool no
Press return
Now reboot.
The reverse would be "yes".

My third party applications keep de-activating. How do I fix this?

Hi everyone!
I am wondering if anyone can be of help to me. I am desperate.
I upgraded to Mavericks and am currently on version 10.9.5.
I have numerous third party applications...to name the two important ones,
most of them are video effects from New Blue FX and the other ones are just like converters etc.
I have had no problems with them in the beginning when I upgraded to Mavericks and
certainly no problems before Mavericks. Now all of a sudden, every time I try to use
these applications, it keeps saying that I am running on trial version and that I need
to activate the product with the activation code. This has never happened before and
it certainly has not got to do with a certain app as it is happening with all my applications
that require an activation code. I have to keep activating the apps everyday so that I can
use them and it is becoming really annoying and I don't know how to fix this.
I am sure it is something simple as my computer has been absolutely GREAT since
I have updated to Mavericks. Everything has been so much faster and just amazing until
this new problem. This is the only problem I have. I have checked and I have done ALL updates.
I am a video editor and I use Adobe Premiere Pro CS6 and these continuous activations are
really not helpful for me when I am trying to concentrate and use my effects.
But like I said, it cannot be just the effects I use for adobe as applications that
are not associated to adobe at all are being affected as well.
If you guys could help me, it would be greatly appreciated!
I am really desperate! By the way, I am working on an iMac with Mac OSX Mavericks 10.9.5.
Thank you so much!
Jess

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How do I disable this - "Firefox.app" is an application downloaded from the Internet. Are you sure you want to open it?

how do I disable this - “Firefox.app” is an application downloaded from the Internet. Are you sure you want to open it?

If you want to open it confirm that you do. You will not be asked that question again after the first time you open it
Unless you are keeping Firefox in the .dmg it was downloaded in. That is to say, if you obtained Firefox in a .dmg, and you have kept the .dmg mounted, and are launching Firefox from the mounted .dmg, then you will ALWAYS get that warning. You should copy Firefox from the mounted .dmg to your Applications Folder (or anywhere you prefer), and then eject the mounted .dmg. Unless you need to install Firefox on another system, you can then delete the .dmg.

How can I set up printing to queues on a Windows 2008 server directly from the iPad apps and not from third-party applications without using AppleTalk or Bonjour?

We have a Windows 2003/2008 server-based network with a dedicated print server which we would like to be able to print to over Wi-Fi. How can I set up the printers on the iPad without downloading a third party application such as Print Central or Print N Share? I want to just click the arrow and "Print" then choose the printer, which doesnt show up. I want to be able to use the existing TCP/IP-based network that we have to reach these queues, not having to install Bonjour or AppleTalk to reach them.
Thanks,
KMQ7

This would really be the "Holy Grail" right now. I think this a feature that every large organization requires. AirPrint works on a small scale, but is not really an enterprise class application. In addition it uses the Bonjour discovery process which is difficult in a large LAN WAN environment. For those that would remind me, I am aware of the enhancement link

How can I set a third party application to access my organizations intranet through my organizations network

how can I set a third party application to access my organizations intranet through my organizations network . I am using blackberry bold 9700 OS 6

Hi deepajithesh
This feature is not available. Applications access the BlackBerry Network using the connection to BIS.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to Interface a PDF Form to a Third-party Application

There are several ways of interfacing PDF forms to a third party application. The technique you choose depends on a number of factors, including exactly what youre trying to achieve, and the capabilities of the application.
Full details on how to do this can be found here:
http://avokahhh.wordpress.com/2008/04/14/how-can-you-interface-a-pdf-form-to-a-third-party -application/
Regards,
Tineke Osten - Avoka
www.avoka.com

Try to use Runtime.exec() method like this:
String exePath = "path to acrobat reader executable";
String filePath = "path to the file to execute";
Runtime.getRuntime().exec(exePath+" "+filePath);

How to send HTTP Post to URL (third party software) in JSP/JSPDynpage

Hello,
we want to integrate a third party application in our Portal Component (JSPDynpage using JSP and HTMLB). This third party component is called like this:
http://servername:port/cgi-bin/cgi.exe?request=map&format=html&swldy_ace=GDF&swldy_image_format=p n g&width=525&height=375
How can we do this in the JSP using HTMLB?
Thanks for your help.
Best regards,
Daniel

Hi Detlev,
thanks for your hint regarding the App. Integrator, but it seemn not to be what we want to do: We call a CGI and get a JEPG Image back as request.
Now we used the java.net.URLConnection to do the HTTP post in the JSPDynpage:
// send HTTP POST
try {
u = new URL("http://server/path/ourcgi.exe");
} catch(MalformedURLException ex) {
System.err.println("MalformedURLException");
// build query sting
String query = "request=plot&format=jpeg&template_name=......."
int cl = query.length();
try {
// open the connection and prepare it to POST
URLConnection uc = u.openConnection();
uc.setDoOutput(true);
uc.setDoInput(true);
uc.setAllowUserInteraction(false);
DataOutputStream dos = new DataOutputStream(uc.getOutputStream());
dos.writeBytes(query);
dos.close();
} catch ...
Best regards,
Daniel

Help me! How to use it as a web service from third party application?

After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
TKS！

Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
:D
John

How to use message queue for inegrating third party with EBS

Hi Experts,
We would like to integrate a third party system with EBS using message queues.
Where we will subscribe to a businnes event and which will populate the messages to messages queue.
But how can we deque this message in third party systems. We are in R12.1.3 and no FMW installed.
Any adapater or something is availabe, If so please throw some inputs.
Thanks
Bhaart

Please go to the link
http://developer.novell.com/extend/composer/1006.html
and also see the "message filtering" section.
Where you can find
Exposing message selection hints in the header portion of a message is a common tactic when multiple receiving apps are pointed at the same queue. The application that is best suited to handling a given message type can harvest just the messages it needs, while other applications can act on messages better suited for them. Administratively, it is more efficient to set up one queue (with multiple receivers accessing it) than to set up multiple queues, each with a dedicated receiver. My question is how can I achieve this Via progamatically ?

How do I disable auto-launch of third party applications (i.e. TeamViewer) at startup?

Similar Messages

Maybe you are looking for