How do I disable guest access in the advanced web controls? E2000

Due to cisco connect not connecting and my rouer having some problems I have reset it and gone straight into the advanced web control panel. I have everything set up and running, but I see no way to turn off guest access. I do not want any "guests" to be able to access my E2000 router, how do I disable that in the advanced web control panel?

sabertooth is correct. The Guest network is managed by Cisco connect software only.
You can reset the router and reconfigure it manually.
Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it manually.

Similar Messages

How can I disable guest access on AFP

I want to securise my access from my Mac to my Ready Nas. In order to access it I need a password wich is good. But if I choose "guest access" I'm able to go through witout the password.
How can I disable the "Guest access" ?
Message was edited by: jfmori

That should be in the NAS setup I'd think.

How do I disable guest access on E1000?

I want to disable the guest access connection on E1000 wireless router but this option is not in the firmware menu. So, now I read that I need to use Cisco Connect on the CD to change this feature. When I run the Cisco Connect software, it says it can't configure the router (probably because I already have it configured). Why doesn't the Cisco Connect software simply take me to the settings where I can change the guest access feature? Why does it try to re-configure the router? Whoever designed this at Cisco was probably smokin some medical MJ because it doesn't make any sense that I have to go through so many hoops to do something so simple.
Solved!
Go to Solution.

Hard reset the router by pressing the reset button in back for 30 seconds and release. Wait 10 seconds and power cycle the router. Remove Cisco Connect from your computer completely. Now re install Cisco Connect and configure the router and turn off the Guest Access.

How do you disable voice announcements on the Gusto 3 ?

How do you disable Voice Announcements on the Gusto 3 >

Thanks for reaching out to us, tobrien459! May I ask what readouts you are getting in order for me to make sure I provide you with the most accurate information?
I'm thinking you are looking for this:
From the Home screen, press the Left Soft Key
Menu > Settings > Accessibility > Easy Set-up.
2. Follow the screen prompts to choose settings for
Full Readout, Menu Readout, Digit Dial Readout,
Alert Readout, TXT Message Readout, Browser
Readout, and Flip Open & Talk
Let me know if this is what you need.
TamaraH_VZW
Follow us on Twitter @VZWSupport

HT5509 How can I disable guided access without a password on my iphone

How can I disable guided access without a password on my iphone? Please help. I can't use Find My Iphone and touch screen.

See: http://support.apple.com/kb/HT5018
The easiest way is to connect the phone to your computer, click on its name, and click the "Configure Accessibility..." button on the Summary screen.

How so i get direct Access to the Music/pics stored on NAS

How so i get direct Access to the Music/pics stored on a Buffalo Link Station Live with my iPad without using a App? The NAS is conected with a Router. Privatfreigabe (dont know the english Word) is ok. The iTunes Server on NAS is activated. Nö Problem to get Access from iTunes on PCs.
I just want to use the preinstalled Musik/Photo App to Listen/watch my Music/pics stored on the NAS without losging them on the iPad. Streaming is what i think of.

Have a look at FileBrowser.
https://itunes.apple.com/sg/app/filebrowser-access-files-on/id364738545?mt=8

How does one disable a button in the web UI?

How does one disable a button in the web UI? I am trying to disable the edit button in the web UI for Accounts. What are the steps to take in order to accomplish that?

Hi Abdul,
Locate the Toolbar group group for that application. It should be ACC_OIC01 in your case. You can deactivate a specific button (event) under the toolbar group.
Regards,
J.Prabananth

How do you disable remote access for mac routers

how do you disable remote access for mac routers

Hi, I'd never buy an Apple router again, but see if reverse thinking works here....
https://discussions.apple.com/thread/3926392?tstart=0

How can I turn off access to the internet at scheduled times?

how can I turn off access to the internet at scheduled times? I use an Airport extreme and several units to extend the range. Kids have multiple devices that I don't want on the network at certain hours. On the other hand, ideally, my wife and I would like to be able to access the internet with our devices after the kid's bedtime and during their school study time.

http://www.macobserver.com/tmo/article/airport_utility_setting_wireless_time_lim its

How I can disable unnecessary fonts from the font menu?

How I can disable unnecessary fonts from the font menu?
I'm so frustrated to always browse the kilometer-long font menu. There are Chinese, Arabic, Thai, Japan etc. fonts. I will never need these fonts!
The platform is the iMac and Maverics. Illustrator is a version CS6. All software is the latest version of.
I get off some of these fonts using Apple's Font Book, but still there will be unnecessary Chinese, Arabic, Thai, Japan etc. fonts.
I also have Suitcase Fusion 4, but that doesn't help in this case because I can't disable system fonts etc. I also tried the "Monolingual" software. Monolingual is a software for removing unnecessary language resources from OS X. But still I see many foreign language fonts in font menu.

I could do with an answer to this question too
The fonts I don't want on my system are these (all Adobe covert additions as far as I can tell):

Cant access to the integrated web browser RG60SE

Hi. I recently bought a RG60SE router. Following the instructions in the quick manual i tried to configure it, but i cant access to the integrated web based configuration utility. I tried access from three diferent pcs with same results. I tried to access connecting only the router and one PC, without ADSL modem, but not results.
I tried to reset, plug, unplug, power off, power on, the PC and the router, in many combinations, but i have zero results.
Im very frustrated, may be im doing something wrong?
I have a one desktop directly connected to ADSL modem:
IP 192.168.1.2
Mask 255.255.255.248
Gate 192.168.1.1
DNS1 200.105.128.40
DNS2 200.105.128.41
Please, i need help,
Thanks

Thanks for your answer:
Yes i am using http://192.168.1.1
I have an another router D-link dir-400. When this router is resetted, i can see a d-link wireless signal within my notebook. But i can not see anything about MSI router.

How can I disable excel addin on the Server side?

Hi, is there any way to disable excel addin on the server side?
We want to disable it so that no one can modify or read data in the cube in the production environment, even if he or she had installed the add in. Instead, we provide the Planning data forms as the only interface for end-users to read and write. we do this because the add in is very easy to install and users can read and write data in the cube at their will.
As we designed to keep the security filters simple, it is not a good idea to controll data access through security filters.
so, what i'm asking is how to disable excel addin on the server side?
Thank you for replying.
Edited by: user4592285 on 2012-10-18 上午6:48

Hi,
As Gurus suggested, you will have to restrict viewing of data through dimension level security.
Give access of members to users, only which are relevant to users so that they can't view other user's data/members.
Like give access of members belonging to HR dept only to HR users and give access of Finance dept related members to finance users only.
Hence HR users will view only HR relevant data and won't be able to view (read or write) finance related data and vice-sa-versa.
Hope this helps
Regards
-SM
Edited by: 918547 on Oct 18, 2012 8:40 PM

How can I disable remote access connection window ?

When I try to connect (via TCP/IP) with a VI in another PC (in my local network) it appears the remote access connection window.
How can I disable this (programmatically if possible) ?
A big thanks for your answers.
Linus

Randy,
attached the image of the Remote Access Connection Window that appears when I connect to the VI.
It is the Operating System (Windows) classical panel for Remote Access connections using a modem.
Many thanks.
Linus
Attachments:
Remote_Access.jpg ‏22 KB

Can't disable guest access

I have been trying to disable the guest account. I have found
that if a client creates an initial context without specifying
any security credentials then they still get access to the system
as 'guest' regardless of whether the guest user is disabled or
not. I have also tried to change the guest password to no avail.
Is there a fix for this? I am using wls 5.1.
Thanks, Jim

so, the story here is that the difference between guest/Anonymous and
guest/defaultUser was never really enunciated so far in WLS. the
end-of-year release is working to get a solid resolution of these
differences and the access control thereof. But, the short term deal is that
by disabling guest, you turn off the guest/Anonymous access, but not the
guest/defaultUser access (which has no access control handle). so, the
solution/work-around for WLS5.1 is to simply put an ACL on anything you wish
to protect.
.paul
Kirk Everett wrote:
I contacted weblogic about this and this is what they said:
This is in response to the your case titled "Security Realm / guest
problems". I could reproduce this at my end, and think this is a defect.
I
have filed a Change request for this in our defect tracking system. This
will go to engineering and should get fixed in one of our near service
pack
releases. The defect number (which you can use to track the status of
this
defect) for this is CR036608.
I will be closing this case as now you can track this defect using
the
above CR number. You will see this CR number in the service pack release
notes, whenever this gets fixed.
Let me know if you have any questions/issues regarding this.
And for the workaround, I would suggest you to protect your EJBs
using
security policies in the XML deployment descriptor files, by explicitly
mentioning the users/groups who would be allowed access to Beans.
Jim Corkey wrote:
I have been trying to disable the guest account. I have found
that if a client creates an initial context without specifying
any security credentials then they still get access to the system
as 'guest' regardless of whether the guest user is disabled or
not. I have also tried to change the guest password to no avail.
Is there a fix for this? I am using wls 5.1.
Thanks, Jim

How can I disable software update in the settings of our company iPad?

Hi, Just need your help guys. How can I disable or hide the software update settings in our company's iPad? Our company don't want to update all the iPad fixed asset to our employee. Thanks.

There are two files that ought to change when you set your preference:
"/Users/yourname/Library/Preferences/com.apple.systempreferences.plist"
"/Users/yourname/Library/Preferences/com.apple.scheduler.plist"
Try moving both of them out of the prefs folder. Then launch System Preferences and reset your preference to whatever you want (or uncheck the box altogether). See if that works. If it it does you will have to also reset your other System Prefs, since all will be returned to the default. If it doesn't do the trick, you can put the originals back and thus avoid the resetting.
Francine
Francine
Schwieder

How do I disable guest access in the advanced web controls? E2000

Similar Messages

Maybe you are looking for