How do i disable the startup splash screen in elements 9

Try making a direct shortcut for the Organizer and Editor. Make sure you have the correct file path as there is more than one exe file. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe"
Then click Next; then click Finish
Then make a direct shortcut for the Editor in a similar manner.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files\Adobe\Photoshop Elements 9\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
N.B. on 64 bit systems navigate to Program Files (x86)

Similar Messages

How can i disable the startup sound on the Droid Turbo?

How can I disable the startup sound on the Droid Turbo?

I was going to suggest doing the Following from the Link I added below to see if Silence Mode would silence the power up but on my Droid Maxx it does not the start up Droid is still present so I'm not really sure there is an option to silence it.
The First Link is for the ( Ultra Droid Maxx and Mini) the Second Link is for the Droid Turbo. the instructions for the two style of phones are the same.. as far as I could tell
Adjusting audio alerts
Adjusting audio alerts

How do I disable the startup sound?

How do I disable the startup sound? The sound that plays straight after you push the power button.

See this thread:
http://discussions.apple.com/thread.jspa?messageID=2505976&#2505976

A2109AF tablet is only displaying the startup splash screen

so as i was working today as i had my tablet plugged up to the wall charger to charge and at a point several hours later i hear the startup sound so i grab the tablet and look at it and it is displaying only the startup splash screen, i have already tried to do a hard reboot with no luck so i wiped it and when i press the power button to turn it on it is still doing the same thing... any ideas?

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

When using Teststand, how do I prevent the LABView splash screen from appearing?

It comes up even if I have the "Don't show this screen" checked !

I'm excited to see TestStand is a celbrity product.
Typically when you run a sequence in TestStand, LabVIEW is launched by TestStand when the sequence contains steps that use the LV adapter. In this case LV is launched through its ActiveX interface and the LV splash screen is suppressed. This is in contrast to launching LabVIEW manually in which case the LV splash screen will be displayed.
In your case I'm not sure how LV is being launched. You might want to shut down LV and then run your sequence to see if the splash screen is then suppressed.
You may also want to read NI Knowledgebase article 28MEPUXL, "Why Does the LabVIEW Startup Screen Appear When Using the Dialog Box Function from Within My VI?". In this case LV has been opened manually and not be Test
Stand, such that the splash screen is not suppressed.

How do I disable the startup sound on macbook pro 7,1?

I need to disable the startup sound on the macbook pro 7,1 running 10.6.8. If anyone can give me info I would appreciate it.

Look for Startup Sound on Macupdate.com
You really shouldn't turn it off, as if there is a error you won't be able to hear the beep codes.
However you can lower the volume.

How can I disable the "principal contacts" screen ?

In previous release before the 4.4.4 this item are disabled, and when I updated my phone, dammit, again with this **bleep**
Please, can anyone help me ?
How can i disable this item ? in the phone of sony support suggest me that try with third party dialer (...)
If I can't disable this item, the FAV tab isn't good for me
Thanks

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I'm afraid there's no setting to disable this feature.
But if you want to view your starred/favourite contacts without seeing top contacts it is possible by downloading an app or widget that displays starred/favourite contacts. There are several apps for this like Contacts+ widget that you can try.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How I can disable the option "Full Screen Multimedia"?

I am creating a PDF that contains a video. I need to disable the option "full multimedia screen" that appears when I press the right mouse button on the video.
I am using Acrobat X PRO.
Thanks !!

My workaround...
- Convert Vedio to SWF (using Media Encoder + Flash Pro or 3rd party utilities)
- Import the SWF Video to Acrobat
- In the "Edit SWF" -> "SWF" -> Select "Pass context menu click to SWF"
- Assign Document Permission to lock the setting
The playback control will pass to Flash Player, it will disable the "View in Floating Windows" and "Full Scrren MultiMedia"

How can I disable the splash screen in Photoshop CC?

Normally there's a welcome screen where I can disable the splash screen, however since there's no such screen in CC I wonder how I can disable the splash screen?
Anyone can help me out?

I think you may need to make some registry changes if you want to get rid if it. For applications like Lightroom and bridge and droplets are not going to use your shortcuts to start Photoshop up they will use what in the windows registry for key Photoshop.exe for command open and edit as will file associations when you double click on an image file type associated with Photoshop

How Disable Network Magic Splash Screen?

Can someone please walk me through the steps to disable the Network Magic startup splash screen? I purchased the software a few years back and saw a message how to do it. I did it, and it worked a treat...until a recent glitch on my computer forced a major restore, which brought the splash screen back. Now I (of course) forget how I disabled it in the registry. I know this question is small potatoes compared to the major probs others here are having, but I'm hoping someone'll still give me a bit of help.
Solved!
Go to Solution.

cpmurphy wrote:
Oops, I apologize! You're right...you shouldn't have to repeat yourself.
I'm running Network Magic Version 4.9.8225.0-Pure0 on the Windows XP Home Version SP3.
Sorry. Hope you can help.
Chris
Hi Chris,
I am responding from Windows XP Home Edition Service Pack 3 w/ Internet Explorer 7 installed on FAT32 File System.
I just uninstalled and reinstalled Network Magic Version 4.9.8225.0-Pure0
Unfortunately, while this installation is still unactivated, having just reinstalled it, I have not experienced the Network Magic Splash Screen.
My copy is set up for Network Reports as well as starting up at bootup. It has FullAccess going through my McAfee Personal Firewall.
I have seen the Splash Screen you are referring to. It was seen when the Network Magic License Servers were down or Network Magic was not set up, right after it was installed. You need to set up Network Magic right after you install it, before you reboot. You don't need to activate it right away.
Uninstall Network Magic. Reboot. Reinstall Network Magic while it is connected to the Router and configured it, then reboot.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

How do I disable the plugin check at Firefox Version 18 or higher startup?

This thread carries on from a discussion about How do I disable the plugin check at Firefox startup? As clearly Tylerdowner did not like my previous message and so would like me to obviously start a whole new thread to find out what’s going on.
https://support.mozilla.org/en-US/questions/938821
Tyler: I am still looking for support and so are the other 83 people who have this problem. Hence why I am here, not to have to start another thread, not to have a go at you or just to run around further to get a clear, straight forward answer. I am now back to running Version 12 (which, has not solved the problem), with up-to-date plugins which are all supported.
Don’t fob us off, PLEASE HELP. Unless I am very much mistaken, this is the place we are meant to find help, right? Not to be completely blown off because somebody says something you don’t like. Perhaps someone better suited to this will help. I’ll follow on from then with MY problem from Tyler’s final comment as it is highly relevant:
Tylerdowner: Rumor Control, if you are running Firefox 18 with up to date plugins, then you are having a different problem than this thread is about. This is for Firefox 3.6 users who have old plugins, not those with updated software.

I should also add this info for all to see clear as part of my question (can be seen in More system details too):
I liked that version, was the first ever FireFox browser I tried and because of it made it my number 1 browser. There have been a heck of a lot from 3.6 to 18 though I think we’d all agree. Progress can and often is messy, but worth it.
Which is fine except mine, a different version, up-to-date plugins – and I’ve still same problem as these guys. It’s exactly the same even for me who has updated: How do we get rid of the Plugin Check Screen every time we start FireFox? I know I am up-to-date – as it tells me every single time!
I agree everyone should be up-to-date with the software and this may very well be the case that solves a lot of people with lower versions – yet I can say I updated from version 12 to the latest 18, spent the time getting half a dozen different updates as it wanted (all of which are supported according to the link you provided) plugins and yet I am still having the same problem as users with 3.6 and older plugins! Went back to version 12.0 and I am getting the problem since installing version 18.
Therefore from the fact I’m still getting the popup every time telling me everything is updated and safe, which is lovely to know, still doesn’t change the fact it won’t go away! Not a major problem but it is getting tedious now every single time.
Like I say I am willing to wait and see if this gets fixed anyway which to be fair, FireFox seem to do a lot better than the competition. If it doesn’t though I’d still rather go back to an older version just to be rid of it! But not even that is now working to be gone of it! It’s gotten that ridiculous for me now too!
:)

How can a laptop be started without seeing the Toshiba splash screen?

As the title indicates, when I burned a copy of Windows 7 home premium to an ISO from Techverse, (never had an offical recovery partition on my L875-S7208) I never have seen the Toshiba splash screen, it only bots to the Windows 7 splash screen, which means I cannot enter BIOS...can anyone help track down how I can achieve this?

Satellite L875-S7208 Specifications
Satellite L875-S7208 Support Page
The BIOS must set in 'Fastboot' mode. Fully shut down your unit, press and hold down the 'F2' key at the top of your keyboard, and then power the unit on, while still holding the 'F2' key down. You should hopefully then be able to enter the BIOS Setup, disable 'Fastboot', press 'F10' to save and exit.
I would strongly recommend you investing in a set of Toshiba Recovery Media for your model. You can order it here. This will rebuild the HDD recovery partition, reload Windows, and install all the drivers and software your system came with when it was new. Just follow the directions on page 67 of your 'User's Guide'.
Let us know how it works out. Good luck.
Mike

How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?

Someone else posted ths question a month ago, but still no answers. Anyone?
How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?
Windows XP, SP3 operating system recently re-installed so I also reinstalled my printer software. Now, for some reason, each time I turn my computer on, my HP Photosmart C4100 all-in-one photosmart premier software opens. It is not in my startup. This slows down my computer terribly, which is why I never used the program before my re-install. How can I disable this feature? I only print, I don't use it for photos.
Any help here is appreciated.

Run msconfig.exe from the start button (type in msconfig). When it comes up go to the Startup tab and find and deselect the HP product you do not want to start. Save and reboot computer. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How can I disable the behance pics during the startup of my CC 2014 programmes?

When I start my photoshop cc 2014 and illustrator and all other apps, there ware always some behance pics from users.
is there a way to disable them?
thanks a lot
alex

hi sarah,
thanks for getting back to me.
i mean these images:
when the programmes are starting up…
thanks a lot for your help
alex
Am 08.01.2015 um 16:05 schrieb SarahBehance1 <[email protected]>:
How can I disable the behance pics during the startup of my CC 2014 programmes?
created by SarahBehance1 in Behance - View the full discussion
HI Alex - can you send a screenshot of what you're seeing? I'm not sure what you're referring to.
Talk to you soon, thanks!
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7077548#7077548 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7077548#7077548
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Behance by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Alex an der Haas
Art Direction
// Die Goldkinder
// Ausdenken und Machen.
// Mollardgasse 85A / Stiege 3 / Top 142, 1060 Wien
// Tel: +43 (0) 1 595.37.07
// Mob: +43 (0) 699.816.366.31
// http://www.diegoldkinder.at

How to resolve a Lenovo PC that will not pass the Lenovo Splash screen with no access to Windows

Here is my problem and here is the solution!!!
My B540 Ideacentre would not pass the Lenovo splash screen. The only operational keys I had was F1 (BIOS) and F12 (BIOS options). F2 went to a light blue screen so no chance of even a one key recovery. Warrenty had expired four and a half months ago. I contacted Lenovo and after the guy told me to try F2 twice he said it was a HDD or other hardware failure and would cost around £200 maybe and also would take about two weeks.
AT THIS POINT YOU SHOULD NOT BE ANGRY FRUSTRATED OR PANIC. REMAIN CALM AND STOP AND THINK WHAT ACTUALLY WAS HAPPENING WHEN YOU LAST USED YOUR PC.
For me I remembered Windows had auto downloaded 8.1 and was asking me to install. Also my keyboard had lost shift W T Y keys. This told me that it was not a hardware issue but a software issue and perhaps from this update. My HDD was not clicking or beeping and this PC has a 2TB Seagate Barracuda which has a good reputation. Luckly for me I also have a Seagate external expansion 2TB and a 500MB expansion which was the HDD from my old HP Touchsmart which I converted into an external hard drive by buying a HDD enclosure with cooling fan and all leads from eBay for £25 and this is where the solution is.
If you can create an expansion drive so easily and access the HDD then why cant I do it with the HDD from my Ideacentre and of course you can. So first unplug your PC or laptop. Next remove the cover and unclip the HDD (which is easy with the B540. See user instructions). Next I removed my HP HDD from the enclosure and fitted my Ideacentre HDD in its place. Next you need a laptop or another PC. Switch it on and then connect your HDD to the laptop or PC via highspeed USB cable. My laptop is running Windows 7 Ultimate and of course has all the repair tools required. When the software has loaded you may get a box that will have two options. The first will ask you if you want to repair your files and the second to scan for bad sectors and to attempt repair recovery of sectors. Tick both boxes and click start. This is a long slow process but worth the wait. Nine hours later my HDD was ready. I connected my Seagate expansion to my laptop and moved all new files that I had not backed up. So at this point you should create a folder and move all your photos music videos documents etc to it. This can take upto three hours if you have never backed up before and are moving everything. Once completed I shut everything down and replaced the HDD into my Ideacentre. Make sure do not have any external devices connected such as expansions external drives headphones etc. Connect the power and switch on. The Ideacentre booted up and there was a pause at the splash screen then it went to a black screen and then by the miracle of logical thinking I was at my lock screen. I was never so glad to see the map of my home land "Ukraine". After jumping up and down with joy I then went in and all was as normal but to be sure I went into safemode and started a complete restore. This is the option where you completely format your HDD and restore as new. It takes a long time but it is the best option because you do not want this to happen again. When this has completed and you are in Windows do not wait a moment longer by playing with your photos or creating your desktop picture. Go to create a recovery drive (use a 32GB stick) and after that also make a copy to disc. Next go to command prompt (cmd) Admin and change a setting by typing bcdedit /set {default} bootmenupolicy legacy. This will now enable your F8 key to boot straight into safemode just incase you need to in the future. It will slow boot time a little but better to be able to get in to Windows than not at all for the sake of a few seconds.
Well I hope this helps someone out there and I know you may think its a lot to do but it is not. Ask a friend to borrow a laptop or PC and perhaps a HDD encloser. The rest is just time but when you see your lock screen you will not care trust me.
Cлава Україні!!! Героям слава!!!

I thought this was the method I used before but I followed through it and it was a horrific fail. "Operating system not found". Can anyone help?
http://superuser.com/questions/421402/how-to-create-a-bootable-usb-windows-os-us ing-mac-os-x
Steps To Achieve Victory
Download the ISO you want to use
Open Terminal (in /Applications/Utilities)
Convert .iso to .img using hdiutil:
hdiutil convert -format UDRW -o /path/to/target.img /path/to/source.iso
Rename if OS X gave it a .dmg ending:
mv /path/to/target.img.dmg path/to/target.img
Type diskutil to get a list of currently connected devices
Insert USB drive you want to use
Run diskutil again to see what your USB stick gets assigned eg - /dev/disk3
Run diskutil unmountDisk /dev/diskN (where N is the number assigned to your USB stick, in previous example it would be 3)
Run sudo dd if=/path/to/target.img of=/dev/diskN bs=1m (if you get an error, replace bs=1m with bs=1M
Run diskutil eject /dev/diskN and remove your USB stick
The USB stick will now be ready to use
Also similarly described here: http://www.tomshardware.co.uk/answers/id-1733410/creating-microsoft-bootable-usb -mountain-lion.html#.

How do i disable the startup splash screen in elements 9

Similar Messages

Maybe you are looking for