How do I disable the wireless on my Photosmart C410?

Windows 7. Pushing wireless button does not work. No menu option for turning off or disabling.
This question was solved.
View Solution.

Try going into the wireless menu and then select Restore Network Defaults.  In that same menu there should be a wireless off setting, or perhaps pushing (and holding) the wireless button will now work.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • How can I disable the wireless port (feature) on my Verizon router ?

    How can  I disable the wireless feature on my Verizon router.  I do have 9100EM15-10 Model. I don't know the procedure or what the PW should be. Thanks nss

    Thanks. Can we confirm about the router reset procedure. I have 9100EM15-10 Model router. How can I log in to disable the wireless port on my router. I tried calling Verizon tech support but they were difficult to reach or get in last night.

  • How can I disable the Wireless Keypad?

    The touchscreen tablet chirps all day about a "Communications Failure" with the wireless keypad.  The tablet itself and our iPhones are all we use to arm/disarm the system.  Plus, the wireless kepad goes through batteries like nuts.  How can we either disable the keypad, or disable the notifications?

    I think you can remove the wireless keypad with the touchscreen. Go to settings, enter the installer code, find the keypad and remove it. If it burns through battery's it probably is too far away from the touch screen with not enough other devices in between. If you would place some other zigbee devices in between the keypad wouldn't need to increase it's radio signal to communicate. 

  • How do I disable the wireless button on my Acer Aspire 3000

    I got my Broadcomm wireless working, and everything's great, except for the design of this stupid laptop. The button that toggles the wireless is positioned in a way that if I am leaning back with the laptop on my lap, my belt or stomach often accidentally turns the wireless off.
    Is there a way I can keep the WLAN working, and just disable this stupid button?

    If the button on your laptop is anything like the one on my old one (an old model Sony Vaio), the switch is actually a hardware switch that simply completes a circuit and provides power to the wireless card. If this is the case, short of taping the button in the 'on' position or opening the case to solder the connection, I don't see a way to keep it on indefinitely.

  • How can I disable the wireless status LED (T61)?

    When I'm working on my laptop and listening to, for example, online radio the wireless status led under the screen keeps blinking (data is being transmitted). I find this extremely annoying and distracting. Is there any way to disable the LED? (but obviously I would still need to be connected). I'm using windows xp on a thinkpad T61.
    Help much appreciated!

    i would use a black permanent marker or something, or a black sticker. This is the easiest and safest way of doing it, it is perfectly reversable. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • How to disable the wireless section of Airport Extreme Base Station?

    Is it possible to disable the wireless section of Airport Extreme Base Station?
    It is because I do not want to have any high frequency radio signal which may be dangerous for small baby (no such proof for the moment, however).
    Anyone using the new Airport Extreme Base Station please check and help.
    Thanks!!

    I think you are a little too concerned. Just for the sake of how to, here it is.
    go to manual set up, airport, wireless, wireless mode, and then choose off.
    good luck.

  • How to automatica​lly disable the wireless interface when the LAN interface is connected

    Hi,
    Is there a way to automatically disable the wireless interface when the LAN interface is connected on  R61s and X61s?
    Thank you!

    Hi,
    Thanks for the answer. I'm trying to deploy the profile that I've created on all my laptops. But i'm facing an issue for a while.
    When the profile is deployed on a laptop, Access Connections finds a new ethernet port and asks to assign it a profile. But the problem is that Access Connection don't allow me to assign it to my wired profile, only to my wireless profile and that doesn't make sens to me. Besides, it is written in the dialogue box that ethernet profiles are disable for the match of the new port...
    Is there any way to assign the new port to the new profile without human interaction or just how to make the wired profile available when access connection is launched and find a new ethernet connection
    Thanks in advance!

  • How do I permenantly disable the wireless on HP 6700, 6100, 3000 all in one printers?

    Wireless is not allowed in my environment. We turned off the wireless, but very easy for end user to re-enable it. And they have re-enabled it on several occasions resulting in security findings against our company. Need to permanantly disable the wireless. Is it possible or do this or do we need to throw away all current HP's and stop the order for the remaing 10,000 and find another manufacturer that has the ability to fully disable wireless on the printer.

    Hello Faasman, 
    Please find the below steps to disable the wireless on the printer .
    HP Oficejet 6700 
    Touch on SETUP > Network > Wireless ,   select OFF
    HP Oficejet 6100 
    To turn the wireless radio off, press and hold Wireless button until the light goes off.
    HP Deskjet 3000
    Press the Wireless Button. It shows wireless menu on printer display. Check for Wireless Radio and set it to OFF. 
    If the issue still persists, then call HP Tech Support  for further assistance..
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Disable the wireless network card upon connection.

    Has anyone done the following, if so can you provide some insite on how to do it and how well it works....If wireless networking is not being used in the organization, it is possible for CSA to disable
    the wireless network card when it is connected to the corporate network. I'm assuming by using the system
    state variable with the rule, you can allow laptop users the ability to use wireless when they are
    not connected to the corporate network.

    I dont' see a system state "ethernet active" do I create this? I'm on CSA version 5.1.0.103. I have a system state called network which has the description of All users who are logged on via a network connection. Is that the same thing you mean? Then how do I create the rule? I get to where I have a NAC rule but I'm not for sure what to choose after that.

  • How can I disable the low ink warning messages.

    How can I disable the low ink warning messages.  The Photosmart Plus B210 printer is connected wirelessly to my Mac over a home network..

    Open up a terminal (use spotlight to search for 'terminal')
    Find the process ID of the HP Device monitor by doing 
    ps -eo pid,command | grep "HP Device Monitor"
    The process id will be the number that is printed. Sometimes you may see two results, the correct result to use should print "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"
    Then using the number you got from the first step, run the following command.
    sudo kill -9 <pid>; sudo rm -rf "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"
    You will be prompted for your admin password.
    Below is an example of when I ran it:
    John-MacBook-Pro:~ john$ ps -eo pid,command | grep "HP Device Monitor"
    90509   /Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor
    90513 grep "HP Device Monitor"
    John-MacBook-Pro:~ john$ sudo kill -9 90509; sudo rm -rf "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"

  • How do I disable a wireless network and recreate it?

    How do I disable a wireless network and recreate it?  I believe I set it up incorrectly so I would like to delete it or disable it and recreate the wifi network

    Go into settings>network, highlight the network you want to delete, and click - at the bottom of the services list. You can then add it from scratch by clicking on +.

  • How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?

    Someone else posted ths question a month ago, but still no answers.  Anyone?
    How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?
    Windows XP, SP3 operating system recently re-installed so I also reinstalled my printer software.  Now, for some reason, each time I turn my computer on, my HP Photosmart C4100 all-in-one photosmart premier software opens.  It is not in my startup.  This slows down my computer terribly, which is why I never used the program before my re-install.  How can I disable this feature?  I only print, I don't use it for photos.
    Any help here is appreciated.

    Run msconfig.exe from the start button (type in msconfig).  When it comes up go to the Startup tab and find and deselect the HP product you do not want to start.  Save and reboot computer.  Now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HT201178 How do I use the wireless keyboard to edit my iPhone contacts?

    How do I use the wireless keyboard to edit my iPhone contacts?

    Type in the field for first name, last name etc. When you're ready to go to the next field, hit enter/return.

  • How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?

    How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?
    I have a few hundred computers running Adobe Flash Player.
    The operation system is Windows XP.
    They are Compaq 6005 desktop PC’s, with an inbuilt ATI radeon HD 4200 video card.
    We have a persistent issue where viewing a flash video (e.g. something on youtube) causes the video card driver to crash.  You are left with no video signal to the monitor.  Audio continues and the computer still responds to commands. This only happens when watching flash video.
    We have tried:
    Updating flash plugin (numerous versions)
    Updating the video card drivers (we have tried the last three video card driver versions, including the HP drivers and ATI drivers)
    Updating the browsers (this problem happens with IE8/9 and Firefox10/11/12)
    There seems to be two ways to work round this issue.  One is to disable the video acceleration in the ‘troubleshoot’ section in the advanced part of the display settings area in windows.  The other way is to start a flash video, right click, go to ‘settings’ and untick the box marked ‘Enable Hardware Acceleration’.
    Doing either of these things allows the user to view flash videos with no apparent issues.
    Is there a way to disable the hardware acceleration in Flash without visiting the PC?  Perhaps an undocumented option in the mms.cfg file? I understand that you can use an option to skip the video card check, and so force hardware acceleration on, can you do the opposite?
    Thanks in advance
    Daniel.

    Hi.
    I have had over 200 views, and no suggestions as to how this could be fixed.
    I have also posted in the general flash forum, that thread has fewer views.
    If I should put this question in a different forum please let me know which one.
    If what I am asking is not possible is there a mechanism for escalating this issue or requesting a feature for the next version of flash?
    Thanks.

  • How do you sync the wireless keyboard with the Ipad?  It doesn't ever find

    How do you sync the wireless keyboard to the Ipad

    Have you read the iPad manual (Page 22)?
    http://manuals.info.apple.com/enUS/iPad_UserGuide.pdf
    and the Bluetooth Keyboard manual:
    http://manuals.info.apple.com/enUS/Apple_Wireless_Keyboard_2009UG.pdf
    If your keyboard is already paired with another device that is in range then you must unpair it first (see page of the keyboard manual).

Maybe you are looking for

  • Problems with DSLR Footage in CS 5.5

    I am using Premiere CS 5.5.  I have no trouble editing AVCHD footage, but a new client is giving me footage shot with various DSLR cameras and this is causing me problems. First, my specs. Windows 7 i7-2600 processor GTX 460 card (1 GB memory, 336 CU

  • Cannot select language in Powerpoint

    I would like to change all text on all slides on a powerpoint 2011 presentation to English. So, I found this Applescript (see below) that basically does what I would have to do manually in an automated way. It almost works, except after it finished r

  • High Availability Server in Unix Environment - Checking

    Hi experts - I would like to know, how to check in any SAP - CI server is configured for High availablity option ? I have Unix-Solaris installed in my work. Is there any Unix command would show this has HA options? Would appreciate your help. Thanks,

  • I get an web service error when trying enable web services. I have latest update and rebooted

    i get an web service error when trying enable web services. I have latest update and rebooted

  • Retrieve responsible resources for a role in cProjects

    Hey all, I would like to display a list of assigned/unassigned resources corresponding to a role for tasks grouped under individual projects. I am not sure how I can find a relationship between the roles and resources using the tables. It would be re