How do i disassemble the printer hpofficejet 6210 all in one ( paperjam with glue paper - gluein)

HP officejet 6210 all in one
Paper jam with selff-stick paper. I can not remove it. I tore it apart while trying to remove it, and now I can no teven see the left over self-stick paper. I need to disaasemble the unit to remove this glue paper.
Wher can I find tool or how do I diassemble it so I can remove the rest of the selfsticking paper.
Thanks
Charlie

The main part of the output tray is not removable. There are a few alternatives: the input tray can be pulled partially open and the printed pages loaded in it - it should not be necessary to remove the input tray completely. The other possibility would be to just print using the automatic duplexer. If you are printing on plain paper or index paper this should work, it would not be suitable for printing on the back side of photo paper.

Similar Messages

How can i add a wireless printer HP officejet 6310 all in one? is it possible

How can i add a wireless printer HP officejet 6310 all in one? is it possible..?

Hi @millep
To answer your question, no the Officejet 2620 is not a wireless printer;
- Source: Printer specifications
As for the USB cable, personally, I believe the intention is to bring down the cost of the printer by selling the USB cable separately. Many people already have printer USB cables kicking around the house, so instead of paying more for the printer and having an extra cable I believe the theory is reduce the cost and sell the USB separately for those who need to purchase one.
I hope this answers your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Where is the print button on my all in one

where is the print button on my all in one pc i cant see it at the top of the page

Hi,
Hundreds of AIO models are out there, what is the model of your printer ? Where do you print from: from its card reader of from a computer ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

10.5.1 broke wireless printing to HP 6210 All In One

That's my educated guess.
I got a MacBook in Nov. last year. It came with 10.5 pre-installed.
I disconnected my existing HP 6210 All In One from my wife's blueberry iMac and plugged it into the USB port on our Airport Express.
Wireless printing worked two or three times. We don't print that much or that often. I was so excited that we could print wirelessly.
At some point I installed to 10.5.1. Pretty soon actually. Probably less than a month after getting the computer. I'm almost 100% positive that it was AFTER that point that this problem started happening and I've installed 10.5.2 (which was supposed to fix wireless printing issues.) It's still happening. Here's what happens.
• While connected to the Aiport Express, The printer shows up in the list or printers. Several times I've deleted it and re-added it since this problem started. It shows up as a BonJour printer and it's the only way one can add it. The Mac even picks the right driver.
• System preferences shows the printer in the printer list, and it shows a green light next to it, and it says "Ready, Idle" (or something to that effect.)
• I send a print order from say, Safari.
• The print queue for the HP opens.
• The print queue shows "Opening printer connection" and "Connecting" and it stays like that for a long time until the queue stops itself. The "Pause printer" button turns into "Resume".
• If, while the print queue is trying to connect, one plugs in an Ethernet cable into the MacBook, the printer all of a sudden begins printing any and all print orders in the queue. Note that the Ethernet cable is connected to the same Ethernet hub as the Airport Express.
• One could also send print orders while the Ethernet cable is connected, and this works just fine, but that's not the problem.
• If, while the print queue is trying to connect, one plugs in the USB cable that is connected to the printer directly into the MacBook, this does absolutely nothing. The print queue just hangs.
• I went to the HP website, and downloaded what appears to be a new set of drivers, and setup software. Installation went fine, BUT I could not "set up" the printer until I connected the USB cable that is connected to the printer directly into the MacBook. Again, that's not the problem.
• The HP website also says that Mac OS X 10.5 has the necessary drivers and no installation is needed.
• The HP website also has a page that lists instructions to set up an HP device on a Wireless network. The instructions involve making sure that the device is set up for wireless capabilities, and connecting to it via BonJour and some other stuff. I can't get very far into this process, because I've been over all the menu options on the printer itself and I can't see anything about wireless setup. I've also looked at the manual (PDF) and there's only one single occurrence of the word "wireless" and it has nothing to do with setup. I forget what it's about right now. It's on the second to last page or somewhere near the very end.
• So that's where I am right now. New drivers, no printing. It worked with 10.5 and I strongly suspect that 10.5.1 broke it. And that 10.5.2 did not fix it at all.
• I would like to test my theory by reverting to 10.5 but I've already had to re-install the OS once and recover from a backup once after re-formatting the internal HD. Better not mess with that.
Any comments and/or questions that would help me fix this would be greatly appreciated.

Good news. It appears to be fixed!
Of all the things I've done, I'm convinced that what fixed it was resetting the printing system. A forum linked to from another place I posted this question mention that it helped others. I found how to reset the printing system in Leopard by searching for it online.
I went to System Preferences > Print & Fax and right clicked on the left had sidebar. The contextual menu had the command "Reset Printing System". This warned me that it would delete all my printers. I said OK. Sure enough all my printers were gone.
For good measure, did the following:
- I re-installed the new HP software.
- I re-set up the HP 6210 while connected directly through USB using the HP setup Assistant. This process adds the printer both as a printer and as a Fax in System Preferences > Print & Fax.
- I opened the print queue and the utility and print a test page using this direct method.
- I disconnected the HP 6210 from the computer and connected it to the Airport Express.
- I went back to System Preferences > Print & Fax and clicked on the plus sign to add another printer
- (additional note) In the resulting dialog box, I tried adding the printer as an IP printer (using the Airport Express' IP address) but for some reason could not find the right driver (I was looking for one with the term "OfficeJet"--more on that below). I picked a different driver knowingly and got a weird message about the software being incomplete. Sure enough, printing to this new printer added this way with the wrong driver did not work at all. I decided to try the OS's own automatic way to add the printer (see below).
- In that same dialog window referenced above, I clicked on the leftmost icon (I think it says "Default") and the (at this point wireless) printer was already on the list as a BonJour printer. I made sure to give it a different name than the already added, direct USB connected (same) printer by adding the word "wireless" so in the printer list and print dialing windows and it's print queue it's called "HP OfficeJet 6200 Series wireless" as opposed to "HP OfficeJet 6200 Series" which is the original direct connected (same) printer. And the driver the OS picked automatically is "HP All In One 5.3.1" (as far I can remember--it could be something a little different).
- I sent a print order from Safari, and boom! I started to print almost immediately! After about 5 minutes, I sent it again, and it printed again! Then I printed page one of an email from Mail, and it worked again!
- So far so good. We'll see if this holds up.
Thanks for all the comments, suggestions and links that helped me (apparently) solve this.

Fax works-print doesnt on 6210 all-in-one

I have an Officejet 6210 All-in-One. I recently sent some faxes successfully, and could not use the printer immediately thereafter. The fax is still working but there is an error message for scan copy or print which says NO CONNECTION--TURN ON CONNECT COMPUTER OR INSTALL/RUN DEVICE SOFTWARE which I'm not savvy enough to understand or do. Thanks, irret

Hi can you navigate to the Start menu and then into HP and the HP Solution Center? From within that, select settings (probably on the lower right side of the HP Solution Center screen. In settings, click on Printer Settings where you can change the defaults for your printer.
I am an HP employee.
Feel free to provide Kudos if I have helped you!

How do you set the time and date for the fax on the HP Office Jet 4622 All-in-one Printer?

I installed the HP Office Jet 4622 All-in-one Printer and everything works wonderfu. However on the test page for the fax the time and date are showing Jan-00-00 00:00AM. I do not know how to change the date and time. Please help. Thanks.
This question was solved.
View Solution.

Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can any body tell me how to make changes in the print layout of Fb03.

hi,
Can any body tell me how to make changes in the print layout of Fb03.
I want to add comapny address on the layout.
Regards
Mave

If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
Good luck,
Bhanu

Ready to print. Now, how to send this to the printer?

Hello Again,
The little program is 5.5 x 8 inch pages (letter size paper folded in half). They must to
print it in 4 pieces of paper letter size, put them together and then fold them in half, (staple it).
I am using 1/4 inches in bleed and I would like to have crops marks. Must to be PDF!
I have no idea how to send this to the printer. Any help?
Thanks a lot!!
Jesus

First, ask your printer.
Second, printers generally want unimposed PDF. IOW, export regular pages and let your printer arrange them the way they want it.
But definitely ask them first. And make sure you mention the bleed.
Ken Benson

How do I turn off the printer colour management in printer drivers on my photosmart C7280

photosmart C7280
How do I turn off the printer colour management in printer drivers

HI whcotton,
You can click here to go to a post for help with disabling the printer color management for your printer. This person was having the same issue as you and the accepted solution worked for them. Hope you find this helpful.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

How can I print to hp photosmart all in one 7280 from ipad

How can I print to hp photosmart all in one 7280 from ipad
This question was solved.
View Solution.

Hi,
Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
you may find the steps to get and use the app in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to print to HP PSC1110 All-In-One Printer connected to WinXP PC?

Hello everybody,
I would like to us an HP PSC1110 "all-in-one" printer connected to a Windows PC in another room.
The easy part: The printer shows up in the browsing window, under the correct Windows domain, when I try to add an "other Printer" device.
The difficult part: When I try to select the printer model from the list of HP printer models provided, it does not show up, although HP PSC 1110 is included in the list of supported printers.
I also tried the ESP HP-deskjet drivers, both old and new version. But those result in printer errors on the Windows PC.
BTW: Printing over the net works well from other Windows PCs!
Can somebody out there who had a similar problem before give me a hint how to set up printing to an HP "all-in-one" over the Windows-Network?
Thank you,
Detlef

Thank you for the detailed information. Maybe I should have added a few screenshots too.
The suggested procedure probably works for a HP Photosmart Printer. However, the PSC1110 is a "Printer, Scanner, Copier" all-in-one device. Unfortunately, this one does not show up in the menus, although it is supposed to be supported. I assume that only an USB backend is available, but no SMB backend.
Is this correct? Is there a workaround?
Thank you for your feedback
DC

How can i print a list of bookmarks or extract bookmarks with number paper to print?

How can i print a list of bookmarks or extract bookmarks with number paper to print?

I have created a tool which can create a summary of the bookmarks structure of a file in either PDF format or as a plain text file, and you can also choose whether or not to include the matching page number for each bookmark. Have a look here: http://try67.blogspot.com/2008/11/acrobat-export-bookmarks-to-pdf-txt.html

How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

how to print to my wireless all in one photosmart prem c410 when printer is not powered on?

Hi,
You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

How to download repair of "missing WIA" for officejet J4550 All in one printer

officejet J4550, all in one
Problem: message states "missing WIA"
I'm missing my installation disk and would like to download the solution to repair/update/install the WIA.
how to download repair of "missing WIA" for officejet J4550 All in one printer

HI knewsomga,
WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
Please follow the instructions below.
Please hold down the windows flag key and the R to open the Run box.
Type services.msc and press Enter
Locate Windows Image Acquisition (WIA)
Right click and open Properties
Stop the service from the General tab and then Start it again
Verify that the Startup type is set to Automatic rather then manual
Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
Click here to download and run the utility > HP Print and Scan Doctor
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HT2500 How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it.

How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it. New macbook pro with LION OS

Just drag the divider line between the preview pane and the message list all the way to the edge so the preview is completely closed. Selected messages will open in a new window with a double-click or the return key.

How do i disassembl​e the printer hpofficeje​t 6210 all in one ( paperjam with glue paper - gluein)

Similar Messages

Maybe you are looking for

How do i disassemble the printer hpofficejet 6210 all in one ( paperjam with glue paper - gluein)