How do I discontinue generated report after every fax I send. Officejet 6600. A waste of paper.

This question was solved.
View Solution.

chickie5,
You would want to go the set up menu on your printer.
Then go to the >Fax Setup Option
Next go down to  > Fax Reports
It should look like this:
Fax Reports
Fax Confirmation
On(Fax Send)
On(Fax Receive)
On(Send and Receive)
Off
You should be able to turn off the option on fax send.
Let us know if this helps or not.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Similar Messages

  • Not able to generate reports after 8.1.1.3 patch installation

    Hi All,
    We are not able to generate reports after 8.1.1.3 patch installtion.
    and we also followed workaround as below
    1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
    2) Import the 4 SIF files in the following order:
    S_XMLP_REP_TMPL_02112010.sif
    SBL_XMLP_REPORT_SELECTION_FLG.sif
    Report Template BC.sif
    Report Template Registration Applet.sif
    3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
    Still not able to generate Reports.
    Below is error message
    Please ask your systems administrator to check your application configuration.
    ObjMgrMiscLog     Error     1     000000064e150fa0:0     2011-07-07 19:45:31     (busobj.cpp (1654)) SBL-DAT-00222: An error has occurred creating business component 'Report Template Position BC' used by business object 'Report Administration'.
    Please ask your systems administrator to check your application configuration.
    ObjMgrBusServiceLog     Error     1     000000064e150fa0:0     2011-07-07 19:45:31     (swemenusvc.cpp (406)) SBL-DAT-00222: An error has occurred creating business component '<?>' used by business object '<?>'.
    Please ask your systems administrator to check your application configuration.
    Thanks
    Sean

    Hi Rajan,
    Thankyou for for your reply.
    Reports were working fine and we are able to generate reports at configured views in 8.1.1.1 version.
    After installing 8.1.1.3 patch, if we click on reports icon below is the error message displayed.
    An error has occurred creating business component '<?>' used by business object '<?>'.
    Please ask your systems administrator to check your application configuration. (SBL-DAT-00222).
    - is it mandatory to configure security model?(in 8.1.1.1 we used default security model)?
    -is it necessary to import BIPDataService and BIPSiebelSecurityWS inbound Web Services?
    - I didn't see below views as mentioned in bookshelf.
    . Reports - Custom Templates
    . Reports - Standard Templates?
    Thanks
    Sean

  • DME file, is generated with # after every word.

    Dear All~
    When I'm generating DME file, I see the file is generated with # after every word.
    Infact it should generate without #.
    Do I need to maintain any settings?
    Please share your experience.
    Thanks and regards
    Sri

    Can you please elaborate your answer.
    Please assist me understanding why are we converting LAP from Lightweight mode to Autonomous mode?
    The issue is LAP is not able to discover Controller.

  • How to insert horizontal line dynamically after every line item in sapscrip

    Hi All,
    I have to insert a horizontal line  after every new item in sap script.
    How to do this .
    In some material there is2 line item or in other line item it ay be more .
    How to insert horizontal line dynamically after every line item
    Point will be rewarded
    Regards
    Niraj

    Hi Niraj,
    You can get your work done by keeping the horizontal line (&ULINE&) after all the item level fields, in this case once each item line is written you will get a horizontal line.
    In case you have different fields for the item lines which are optional (not printed every time) then you can have them in an IF....ENDIF condition and below the endif use a horizontal line.
    Some thing like this:
    /E ITEM_HEADER
    IL <TI>Item,,Material,,Description</>
    IP <TI>,,,,Quantity,,,,Price,,Price unit,,,,,,Value</>
    / &ULINE(71)&
    Let me know if this helps, else please describe your problem with an example.
    Luck.

  • How do I stop the TX report after each fax, either receiving or sending

    How do I stop tx report after receiving or sending a fax

    Hi raylene0530!
    Welcome to the Canon Forums, and thank you for your inquiry! 
    So that the Community can help you better, we will need to know exactly what Canon equipment you're using, any error messages you're getting, and (if applicable) the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x), as well as the way you connect to your device (USB or networked via WiFi or Ethernet).
    Any other details you'd like to give will only help the Community better understand your issue!
    Thanks and have a great day!

  • HOW TO STOP MY DESKJET F2180 FROM PRINTING PRINT REPORT AFTER EVERY PRINTING.

    good day,
    i have this problem about my deskjet F2180 everytime i print documents after every printing  it also prints reports
    regarding location of the file, time, last made etc etc.. it's so fruastrating because it's a waste of paper.if i print 100 copies 5 pages documents it also prints 100 print reports.
    please help how to reconfigure or fix this one
    thank you and godbless

    Hi
    that sounds like a word (office) issue, it an option that word gives your, check HERE to turn it off.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • How do you refresh a report after an update?

    Hi all,
    I have a Welcome Page that has several Portlets on it. One of the Portlets is a QBE report. From the report a user can click on a column record and be transported to a form, where the user can modify the record. Once the user is satisfied with the changes, the user hits the UPDATE button and is transported back to the Welcome Page. The only problem is that the Report has not been updated. Refresh does not work on the web toolbar and the only way I figured out on how to refresh the report is to go into the 'Customize' page and make some sort of change and hit O.K. After that, I am redirected back to the Welcome Page with the Report refreshed with current data. How can I refresh the report, without going into the 'Customize' Page? What code does the 'Customize' page do, to automatically refresh the report? I am using Portal 9.0.2.2.14.
    TIA,
    Dan

    Hi,
    This is due to webcache. You can solve this problem by calling the page url with an extra parameter. That way the page would get invalidated.
    Say the page url is
    http://domain/portal/page_pageid=33,32951&_dad=portaldad&_schema=portalschema
    then you should call the page like this
    http://domain/portal/page_pageid=33,32951&_dad=portaldad&_schema=portalschema&1=2
    This just adds a dummy parameter at the end and hence invalidates the cache.
    Thanks,
    Sharmila

  • How to test a generated report in my application by using web test written with Visual Studio 2012 Ultimate

    Hello,
    My application generates report in different formats, such as: Adobe, Excel, XML, CSV and HTML
    I have a webtest that makes all preparations, then generates a report. 
    In my application I have an option either to save the new generated report or open it.
    When I try to open the new report, the web test doesn't see it and therefore not allows me to test it.
    Please refer me to knowledge base or let me know how to resolve this type of issues.
    Thanks.
    qatm

    Hi qatm,
    Thank you for posting in MSDN forum.
    Since this web performance test is used to verify the Http request/respond work correctly in VS, and the browser session is then displayed as a list of URLs in the Web Performance Test Editor.
    However, as you said that you want to test a generated report in my application by using web performance test in VS2012 Ultimate. If the report is not as the Http format, so I think that it is not possible to test a generated report by using web performance
    test.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can i glow a led after every five seconds

    dear sir
    i am using labview 7.0
    i want to glow the led after every five seconds. See  let us consider i start my vi at 22feb2007 at time 10:14:10. When my system time reaches to 10:14:15 at same date i want that led should glow for two seconds only. i want to continue with his loop that is led ON and OFF after  every five seconds
    Is it possible? If yes please help me.
    falgandha 

    Your setup is a bit irregular, because it will be off for 5 seconds, on for two, of for three, on for two, etc.
    Heres' one simple possibiility, modify as needed.
    Message Edited by altenbach on 02-21-2007 09:32 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    OnOff5Sec.png ‏5 KB

  • Generating Reports after Updates are Deployed

    I've recently set up SCCM 2012 R2 in our environment and I'm having some trouble getting a handle on when updates are being deployed to different groups.  What I would *like* to do is have the system generate a report (or at least an alert) and email
    me whenever updates are being pushed out.  I can't believe that in a system as comprehensive as SCCM there is no capability for this, but I just can't seem to find it anywhere.  
    Internet searching has produced lots of guides showing how to enable alerts in general (already done) and how to get alerts when deployments fall below a certain percentage of success.  But at this point I really just need to get to know exactly what
    is happening in my environment and when, so I'd love to get tons of alerts if possible as things are happening.
    Apologies if this question has been asked already.  I wasn't able to find it anywhere in these forums.

    If that's the case, then what is the generally accepted method of keeping track of what updates are deployed via ADR's?  For example user X calls up reporting that his laptop is requesting a reboot after updates have been installed.  This is currently
    my only notification that SCCM has pushed out updates.  It would be preferable if perhaps a report was generated when an update group was updated and the system began deploying them to clients.
    Alternatively, is there a report of some kind that would show the last updates added to a Software Update Group?  If so perhaps I could schedule that report to run on a regular basis.  That would at least give me a bit of a head's up that updates
    are going out to clients.

  • Error in Auto Generated Reports after upgradation from 4.5B to ECC6

    Hi All,
    We are currently upgraded the system from 4.5B to ECC6.
    We are having many reports with report names such as
    'GP0HRYGE9KG1RM5HN4WY9MXC9E4'
    'GP0IZ026BMC4SX5K8BISNZ00FSV' with few syntax errors in it.
    Can any one suggest whether these are any auto generared reports , as the report starts from 'GP *'.
    If so, please suggest how to regenerate the same.
    Thanks.
    Regards,

    Please check the below SAP Note:
    [Note 586786 - Short dump PERFORM_NOT_FOUND with forms from SAPLJ1AY|https://service.sap.com/sap/support/notes/586786]
    Regards,
    Dipanjan

  • How can I programmatically generate report from teststand diff/merge tool?

    Hello,
    I'm currently using TortoiseSVN for change control management of code. A rare, but too common, issue we face is that someone has uncommitted code on their machine.
    We've developed some code to email notify the CORE team when uncommitted code is detected on a machine. We're able to identify which files have modifications, but we're looking to take it a little further and determine what the differences are; preferably between the repository version and local version if you are familiar with SVN.
    I'm familiar with FileDiffer.exe, and have it linked easily to diff files in the TortoiseSVN GUI, but I'm looking for a way to do this and generate a dif report progammatically.
    Does anyone know of a way to launch and programmatically generate a report xml from the TestStand File Diff/Merge tool without use of the GUI? Or if there is another tool or method out there capable of diffing sequences, please give suggestions.

    I'm looking into the same for LabVIEW files... I've come up with the following options but have not identified a concrete way to generate a comparison report so far.
    LabVIEW Compare Tool
    Requires visual (GUI) rep of diff files
    LabVIEW SCC Compare Palet
    Allows for direct Labview connection to SVN but requires PushOK installation or similar client.
    LabVIEW procmphier.llb -> CMP Compare two Vis.vi
    Cannot access the SVN repository, so will need to determine way to create app reference to the repository VIs

  • How do you stop the "alignment" after every print job?

    We got this printer because at first received great reviews, it had a fax, copier and printer.  However, as discussed in another forum, we are wasting color ink when we print in black/white.  I just installed a magenta and already it has lost 1/4 of the ink for "aligning".   Is it set up in the programming to align after print job?  I"m so over this!  I have to hit cancel then wait 4 min for it to cancel.  I have algined and everything is ok, not sure why after each print job.  I followed "HPs guidelines" on the program but there is nothing there to address this issue.  Any help or thought would be greatly appreciated!
    Thanks!

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How to give space to variable after every letter

    hi,
    i am having variable like this
    123445
    i have to diplay like 1 2 3  4 4 5, is there si any FM...
    i dont to want to use offset logic

    hi Siva
    Use WRITE "USING EDIT MASK"
    You will need declare only more one DATA.
    data: X(10) VALUE '123456',
          Y(40).
    WRITE X TO Y USING EDIT MASK '_ _ _ _ _ _ _ _ _ _'.
    WRITE Y.
    use at edit mask '_ _' the most number of space declared at your data.
    ex:
    x(2) -> mask '_ _'
    x(5) -> mask '_ _ _ _ _'
    x(8) -> mask '_ _ _ _ _ _ _ _'
    Regards
    Allan Cristian

  • HOW CAN i PRINT ONLY IN BLACK WHEN COLORS ARE DEPLETED-officejet 6600

    cyan and mag are depleted but I only want to print in black for a contract and it wont allow!!!!!
    How can I override this?
    This question was solved.
    View Solution.

    all cartriges exhausted, only black is full. i want to use only black. how to proceed ?
    valdengo

Maybe you are looking for

  • New icons in the Project Window

    I like the new design except this stupid change that all the icons in Project Window look very similar. I have problem to visually recognise the sequence vs footage and vs img sequence.

  • Hi all, My macbook has been dropped and completley smashed...

    Hi all, My macbook has been dropped and completley smashed...i.e bent battery, smashed screen,etc   I have already ordered a new macbook air, the question is i need to get my data of the old one as my last back up was exactly 6 months ago, is that po

  • RFUMSV0: Deferred Tax Transfer

    Hi Gurus, I have following errors whle i try to post batch input session generated by program RFUMSV50. Version Ecc 6.4. India Service tax posting from interm account to final account. Transaction: S_AC0_52000644 1) "Balancing field profit center in

  • How to search a USB-attached NTFS drive *without* indexing?

    I have an NTFS backup drive from an old Windows XP system attached to an iMac running Mountain Lion.  I would like to search for something on it. I do *not* want to write to it, nor do I need it indexed. How can I find something on this drive?

  • Right side of screen is dead

    Although my phone works well in other aspects, it does not respond to anything touched on the whole right edge of the screen. So, for example, on the keypad I get no response for p, l, or backspace. This means I cannot use text, or enter my password