How do I display text only in the first page inXML Publisher

Hi everybody,
I've been reading so much, on the last two days, on this issue at this forum but I didn't get an answer. My problem is: In an invoices report some text and fields from the invoice header, (such as payment terms, bank details etc.), should be printed only in the first page of the invoice, (If the invoice has more than one page). These elements are not in the document header/footer but in the document body. That's why I think the different fist page of MS Word will not work. I tried also <? start@first-page:body ?>, with no success. Any idea, someone?
Thanks,
Shimon

Hi,
Did you find solution to your problem? I am facing same issue and I want to know how you solved it? It would be great help.
Thank you.
Regards,
Rahul

Similar Messages

How to print a table only on the first page BI Publisher report

Hi,
I have a requirement to only print part of what is in the header on the first page only. It is a table. How can I do this in BI Publisher?
Thanks.

Hi,
better to ask a question about BI Publisher in BI Publisher Forum than here in Reports Forum.
You can create a template in your rtf wich you reference in your header. With BI Desktop in Winword you can use a different header for first page than the others.
Regards
Rainer

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

Thank you. That helped in the first step. I was able to copy text onto multiple pages.
Now I can't get the pictures to copy. How do I get my pictures to copy?
Also once the blog page is on pages, how do i make changes to it?
This my story and the page I am trying to copy.
http://www.city-data.com/forum/tennessee/359683-going-off-grid-east-tennessee.ht ml
Thanks so much
Lisa(writing) and Mike trying to get it right.

TS1702 I wish to save a multi page document sent by e mail as PDF in Pages - it only files the first page? How do I save the entire document ?

I have Pages on my iPad, which is brilliant....but when I want to save a multi page file sent to me by e mail, pages only saves the first page. How do I save the entire document?

What type of document is the file? (ie. what is the file extension for tie file?)
Regards,
Barry

How can I view a PDF file on my IPad? I only get the first page.

How can I view a PDF file from my Ipad, both in email and Internet links? I only get the first page.

Support for viewing PDFs in emails and web-pages is built in to the iPad. You need not have bought an app for that.
There are PDF apps that provide more features than the built-in functionality, but for basic viewing of multi-page PDFs no app is required.

Can only see the first page of books downloaded on Nook using Overdrive, how do I fix?

Can only see the first page of each chapter of downloaded books on my Nook, how do I fix?

can anyone help me

When I copy/paste text to an ipages empty document can does it only show the first page of what I copied?

When I copy/paste text to an ipages empty document can does it only show the first page of what I copied?

You want to use word processing mode. I suggest you ask your question in the Pages forum and include information about what you are copying. Off the top of my head I can't come up with any reason you'd see this in WP mode. https://discussions.apple.com/community/iwork/pages

How can I print Double A4 with HP Officejet 6500? I only get the first page...

I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
I can select "Double A4" to print but I only get the first page. So I only have half a photo.
What should I do?

chris
You can not attach a multi-page .pdf document to Pages.
Just create a folder in which you enclose both your Pages letter and the .pdf.
Peter

Report from SQL Query -Excel format only show the first page

Hi,
I have some Reports from SQL Query. In the display options, I choose Excel as default format. The Excel documents only show the first page. If I choose HTML as default format, it shows every rows.
Please advise on how to have a complete Excel document as HTML format does.
Thanks a lot.
Lina Han

I beleive when you export Oracle reports to Excel it is the Data that is transferred along with Column Names.
You cannot export the variables defined on the report.
Hence you will not be able to export the Footer to excel. (Still looking into it will let you know if i find anything interesting)
Regards,
Bhushan Salgar

Display different header in the first page

I am displaying a table in the header (not an MS word header but header identified as something above <?start:body?> tag) of an rtf template. That table has 3 rows, I need to display one of those rows only in the first page and not in other pages.
I did not find any method on querying for the page number. So, I used a flag in the following manner: (Here, text with red color denotes RTF field). The following is what my RTF file looks like:
Header 1
Header 2
Header 3
init_field
This is the row to be shown on all the pages
if_field
This row should only be shown on the first page.
end_if change_variable
<?start:body?>
other stuff
<?end body?>
Where,
init_field
<?if: (xdoxslt:get_variable($_XDOCTX,'FLAG')!='NONFIRST')?><?xdoxslt:set_variable($_XDOCTX,'FLAG','FIRST')?><?end if?>
if_field
<?if: (xdoxslt:get_variable($_XDOCTX,'FLAG'))='FIRST'?>
end_if
<?end if?>
change_variable
<?xdoxslt:set_variable($_XDOCTX,'FLAG','NONFIRST')?>
BUT, I still see all the rows in all the pages. It seems like the value of variable 'FLAG' is not preserved between different pages. To me, it seems like, header is generated once and same header is used in all the pages

Not sure if this is exactly what you are looking for but why not just place the second line that needs to be on the first page only after the <?start:body?>
Header 1
Header 2
Header 3
init_field
This is the row to be shown on all the pages
<?start:body?>
if_field
This row should only be shown on the first page.
end_if change_variable
other stuff
<?end body?>

Anytime I try to print in Firefox a Microsoft KB article that is 1 page, I always only get the first page.

Anytime I print any Microsoft KB article, I only get the first page worth of text. This is very troubling because the articles are typically long, and I only get 1 page. The second page always comes out blank (even though in IE it will print out multiple pages with all the text).
My specific example today is listed in the URL below. This example will only print to the "DIR" command, I don't get the full page printed out.
Anyone else have this problem? Anyone have a resolution? I hate having to hit up IE just to print a single article.
I updated to FF 8.01 just to make sure, and I have tried different printers and even computers, to no avail. Even the print preview has the issue, only the first page worth of text is printed and the second page is always blank (even if there are 3, 4, 5, etc pages of data to be printed).
I have also tried the Firefox Menu -> Print command, and the "on-page" print command. I have seen moderate success with highlighting all the text that I want to print and going to "Print-Selection" but it is ugly.
Any feedback or assistance is greatly appreciated.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Information only on the first page

Hi,
How do I print a portion of the xml only on the first page of the invoice. I am assuming this portion that need to appear on the first page should be put into the footer. But how can I exit out of a loop that is populating the body of the first page and put that portion to the footer. In which case where would the end of the loop reside.
Thanks
Shandrila

Hi there,
You could try creating sub-templates within your .rtf layout template. Create 2 sub-templates somewhere within yout .rtf and call them <?template:FirstPageFooter?> and <?template:OtherPagesFooter?>, or whatever names you want.
In the first page MS Word footer, call FirstPageFooter (<?call:FirstPageFooter?>) then insert a page break even if you have no fields to display on page 2 and put <?call:OtherPagesFooter?> in the page 2 footer.
Now I have done this in the header before, but not the footer. If this doesn't work the same in the footer you could always just call the sub-templates in the body at the end of page 1 and page2 and not use the MS Word Footer.
Hope this helps
-CC

I want to print an email which has multi pages but I can only print the first page

Can anyone help please?
i want to print an email which has multi pages but I can only print the first page
Tony

Firefox cuts off the URL in your printout, if it's really long, and you also have on the same line (header or footer), the Date and Pages
What I have summarized below is based on this page . . . http://www.watchingthenet.com/how-to-change-or-customize-firefox-printing-defaults.html
I have two questions:
To fix, do a custom setting, for the Header and Footer as follows:
Print / Page Setup / Margins & Header/Footer / "Customize" the "Left" as follows (leave Center and Right all blank)
&T
&U . . . . . . . &D . . . . . . . &PT
&D shows the Short date as: M/d/yyyy - and then the time
To change the format of the Short date in Win 8.1, go to:
Control Panel / Date and Time / Date and Time tab / Change date and time / Change calendar settings /
Date / Short date . . . change from M/d/yyyy . . . to . . . MM/dd/yy
QUESTIONS:
1.) How do you get rid of the time, which appears after the date? In IE, you use a lowercase "d" - but that doesn't work here.
2.) Is there a way to change the font just for the Header and Footer, to something like Microsoft Sans Serif 10?
Firefox leaves no room around the text in the Header and Footer at the edge. To fix:
Address Bar / about:config
Enter keyword "edge"
Then change all four values for the printer you're using to:
print.printer_Foxit_PhantomPDF_Printer.print_edge_bottom . . . 5
print.printer_Foxit_PhantomPDF_Printer.print_edge_left . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_right . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_top . . . 5

Restrict window only on the first page of smartform

Hi guys
Please tell me how to restrict the window so that it doesn't appear on the second page. it should appear only on first page.
I have check the additional events of the window. Even after that its appearing on second page .. how to restrict

Hi,
You can do the following thing to restrict the window in the next page.
1. Copy the first page with all the windows to PAGE2.
2. Delete the window whihc u don't require in the 2nd or any next page (PAGE2).
3. Assign 'Next Page' field value as % PAGE2 for PAGE1 & PAGE2 under the General attributes Tab.
These steps will help you retain a window only for the First page.
Asha

When I print a web page it only prints the first page and not the rest of the web page below the page break.

When I print a web page firefox will only print the first page, all of the content to the first page break and nothing past that.
How can I change the settings so that it will print more than on page?

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Zoom -> click "Reset" -> Page Style -> select "Basic Page Style"
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache, Site Preferences''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

How do I display text only in the first page inXML Publisher

Similar Messages

Maybe you are looking for