How do I divide a number and have 1/3 entered on 3 seperate sheets?

How do I divide a number and have 1/3 entered on 3 attached sheets?

Hi Ellaspapa,
If you are copying the formula from my reply, it may be the fancy divide sign (÷) that Numbers 3 shows in formulas.
I constructed those formulas by
clicking in the destination cell (Table 2 Cell B2),
typing =
then clicking in the source cell (Table 1 Cell B2)
and typing /3
press enter
Repeat for Tables 3 and 4
Numbers will change / to ÷ but it should work.
Any error message with the syntax warning?
Regards,
Ian.
Message was edited by: Yellowbox and typing /3
Message was edited by: Yellowbox

Similar Messages

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
This would be an SMS group similar to an email listserv but running on the SMS network
I have seen private individuals offering this service
It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
Steve

I think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.

I have changed my number and have updated it but however they still send my keychain password to my old number. how can i changed that ? i need it ASAP .

I have changed my number and have updated it but however they still send my keychain password to my old number. how can i changed that ?

Hello Leela24,
Welcome to the Apple Support Communities!
I understand that you have changed your phone number but your iCloud Keychain verification number is still your old phone number. You can edit this phone number in your iCloud settings on your iPhone. Please use the attached article for information on the process.
Get help using iCloud Keychain - Apple Support
Make sure that the correct phone number is associated with your account:
In iOS 8, tap Settings > iCloud > Keychain > Advanced. In iOS 7, tap Settings > iCloud > Account > Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
Happy holidays,
Joe

HT4061 last night I stole my ipad and not how to get the serial number I have the itunes account that I do

last night I stole my ipad and not how to get the serial number I have the itunes account that I do

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
OS X Lion- About Find My Mac
How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
VUWER 1.5.4
Sneaky ******* 0.2.0
Undercover 4.7
LoJack for Laptops Premium Mac
STEM 2.1

How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

I store different channels in a TDMS file.
I like to have a time channel at the first position with group index 1 and number 1.
When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
Here are my questions:
How does DIADEM import TDMS files?
How gets every channel his number and groupindex?
How can I determine which channel has which groupindex and number?
Best regards
Joerg

Hi Jörg,
i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
Did you use the library for creating *.tdms files like in the link ?
http://zone.ni.com/devzone/cda/tut/p/id/6471
Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
german version download link
https://lumen.ni.com/nicif/d/lveval/content.xhtml
english version download link
https://lumen.ni.com/nicif/us/lveval/content.xhtml
Hope it helps
Best Regards

I want to download pse 11 to a second laptop but have no serial number and have lost prepaid card

I have pse 11 on an old laptop I have no serial number and have lost prepaid card how do I install on new laptop

SiJohn if you registered your serial number under your account then it will be available at http://www.adobe.com/. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

How can i find serial number and UPC of my laptop pavillion dv6 touch screen

How can i find serial number and UPC of my laptop pavillion dv6 touch screen if i do not have the sticker at the back or below the battery .. thanks

Hello,
The hot key combination you can use at the desktop screen is "FN + ESC". That should bring a system information window on the screen with the computer information including the serial number.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How can I determine the number and sizes of redologs?

Dear all,
How can I determine the number and sizes of redologs are sufficient to allow redo log switching while hot backup is in progress?
Please advice,
Amy

Two questions here - what the OP put as the subject title and what was asked in the thread, which are different questions.
I would interpret the question in the thread to mean "how to avoid hanging due to archiving waiting for a redo log group to become available." Alert log, wait events, and user complaints would be the source of information here.

My contacts and whats app messages are shown on my sister's iphone! How can I secure my iphone and have a high level of security and privacy! Her Contacts are shown in my iphone as well!!

I have and iphone 6 with iOS 8.1. My contacts and whats app messages are shown on my sister's iphone! She have iPhone 6 and and iOS as well. How can I secure my iphone and have a high level of security and privacy! Her Contacts are shown in my iphone as well! Setting in mac and iphone are a bit presice and sensitive. Is there any way to solve my issue and increase the safety, security and privacy in my iPhone and its data?

Your problem is that she used your icloud ID to connect to icloud and thus had all your data synced to her device. Contacts are not saved in a backup to icloud, since they are stored independently in the Contacts section of icloud. If someone deletes them, they are gone. If you had them on the PC would they be available in some backup you frequently make of the PC?

How can i see what number and time a text message i received a text message

how can i see what number and at what time i received a text message online

If you are on a regular postpaid account, you can log in to your My Verizon account and see the usage details for your account.

How to get the Equipements number and desciption for the contract item ?

Hi Gurus,
        How to get the Equipements number and desciption for the contract item items? It would gr8 helpful to me...
VBAP,,EQUI,,,,,,?
Thanks
Krisna

Check with below tables :
EQUI    Equipment master data
EQKT   Equipment short text
EQUZ   Equipment time segment
Thanks
Seshu

My Apple ID asks for answers to security questions which I never input. I have searched how to reset my security questions and have found that the option below where your answers are to be input to reset questions does not exist on my iPhone 5c

My Apple ID asks for answers to security questions which I never input. I have searched how to reset my security questions and have found that the option below where your answers are to be input to reset questions does not exist on my iPhone 5c

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114119)

I Logic 9 I bought at appel store installed and want to install the new Logic X, how do I uninstall Logic 9 and have the whole program?

I Logic 9 I bought at appel store installed and want to install the new Logic X, how do I uninstall Logic 9 and have the whole program?
Message was edited by: davidjsousa

Of course

I purchased and downloaded Lightroom 5.5. After installing it, I was prompted for the serial number. When I entered it an error message appeared saying it was an upgrade serial number and I need to enter my original purchase number. This was my original p

I purchased and downloaded Lightroom 5.5. After installing it, I was prompted for the serial number. When I entered it an error message appeared saying it was an upgrade serial number and I need to enter my original purchase number. This was my original purchase, not an upgrade. Now what do I do?

It sounds like you bought an upgrade from Adobe. How much did you pay? The upgrade is about $80, and the non-upgrade is about $150. If you bought an upgrade version and had no previous version, you would see what you're seeing.
If that is the case and I were you, I'd call Adobe, and arrange for a refund and to order the correct version.
Hal

How to send Sales Document Number and Item to BAPI_ACC_DOCUMENT_POST?

Hello SAPients,
We are using BAPI_ACC_DOCUMENT_POST to create an accounting document similar to what FB01 does, in FB01 you can type the number and position of a Sales Document even if you are using an Account Receivable account number. But in the BAPI, the ACCOUNTRECEIVABLE table doesn't have a field to include those numbers. How should I pass the sales order number and item to the BAPI? I have tried several things but every time I receive more complicated error messages.
Thank you in advance for your kind help.

Let me know if you have any questions:
Loop through your records and fill in the appropriate structure based on record type (GL, Vendor or Customer)
IF NOT pcard_post_rec-zlsapac IS INITIAL.
    gt_gl_item-itemno_acc   = ls_posnr.
    gt_gl_item-gl_account = pcard_post_rec-zlsapac.
    gt_gl_item-comp_code = pcard_post_rec-zlsapco.
    "gt_gl_item-pstng_date = pcard_post_rec-zlgpsdt.
    gt_gl_item-pstng_date = gv_posting_date.
    gt_gl_item-doc_type = doctype.
    gt_gl_item-alloc_nmbr = ls_assignment.
    gt_gl_item-ref_key_3 = pcard_post_rec-zlgvend.
    IF pcard_post_rec-zlsapac < 500000.
      gt_gl_item-item_text    = ''.
    ELSE.
      gt_gl_item-item_text    = pcard_post_rec-zlguser.
    ENDIF.
    gt_gl_item-costcenter = pcard_post_rec-zlsapcc.
    gt_gl_item-orderid = lv_ordnum.
    APPEND gt_gl_item.
ELSEIF NOT pcard_post_rec-zlsapven IS INITIAL.
    gt_ap_item-itemno_acc = ls_posnr.
    gt_ap_item-vendor_no = pcard_post_rec-zlsapven.
    gt_ap_item-comp_code = pcard_post_rec-zlsapco.
    gt_ap_item-alloc_nmbr = ls_assignment.
    gt_ap_item-ref_key_3 = pcard_post_rec-zlgvend.
    IF pcard_post_rec-zlsapac < 500000.
      gt_ap_item-item_text = ''.
    ELSE.
      gt_ap_item-item_text    = pcard_post_rec-zlguser.
    ENDIF.
    APPEND gt_ap_item.
ELSEIF NOT pcard_post_rec-zlsapcus IS INITIAL.
    gt_ar_item-itemno_acc = ls_posnr.
    gt_ar_item-customer = pcard_post_rec-zlsapcus.
    gt_ar_item-comp_code = pcard_post_rec-zlsapco.
    gt_ar_item-alloc_nmbr = ls_assignment.
    gt_ar_item-ref_key_3 = pcard_post_rec-zlgvend.
    IF pcard_post_rec-zlsapac < 500000.
      gt_ar_item-item_text = ''.
    ELSE.
      gt_ar_item-item_text    = pcard_post_rec-zlguser.
    ENDIF.
    APPEND gt_ar_item.
ENDIF.

How do I divide a number and have 1/3 entered on 3 seperate sheets?

Similar Messages

Maybe you are looking for