How do I do a gradient effect of sepia for my photo?

I really need help with trying to do a sepia effect on my photo but make it gradient as well! Got any ideas? It's urgent!!

Can you upload the image you want to apply this affect to? It makes a difference.
Do we know what version of Photoshop you are using?
This is how I would do it:
Add a B&W Adjustment layer. Just leave the defaults.
Add another B&W adjustment layer but check Tint. The default colour should be sepia, but don't worry if it is not just yet.
Run a black to white gradient up or down the layer mask in the Tint layer.
Now go back and fine tune the tint. Click on the swatch next to the Tint check box, and grab other colours till you get it right.
If you are struggling with the tint colour, clip a Hue/Saturation layer to the Tint layer, and adjust the Hue slider. Use the arrow keys rather than drag the slider, because you'll need fine control.
If you want some of the original colour to come through, adjust the Opacity of the first B&W adjustment layer.

Similar Messages

How do you add a gradient on only half of a photo?

I want to add a gradient on only half of the picture. How do you do this?

Or
Set the gradiant to Foreground to Transparent. Drag to the point you want the gradient to extend to. If you are not far enough, try again. Foreground to Transparent is the only gradient choice that allows you o build the effect.
or
Run the gradient right across a new layer, and use free transform to resize and position.
or
Run the gradient to the point you want on a new layer, and add a layer mask. Run another gradient in the oposite direction in the layer mask, and unlink the layer mask (click on the chain link between Eye icon and layer mask). Now use the Move tool to fine tune the position of the layer mask.

How do you reduce the number of pages designated for a Photo Book? I have iPhoto 11 and OS X Lion.

I have been putting together a photo book. The program is not as intuitive as I had hoped and I have spent hours trying to fit my photos into the spaces they provide, but I am sticking to it. My problem is that I have been told by the program I have 54 pages but I don't need that many pages to get the pictures I want included. How do I delete some of the pages? Thank you for any hlep.
SCSilverfox

Thank you LarryHN. So easy--- Just impossible when you don't know what buttons to push.
May I ask another question? Is it possible to add pictures to the cache of pictures to be added to the photo book without deleting the book and starting over? I have an album of pictures that I put together (60 years of pictures) and I am using that album as the selection of pictures to put in the book. I am having so much trouble fitting in the pictures I have selected in the spaces and sizes that pop up as available to me and there are so many more pictures I have that I now wish I had added to my album choices. I tried adding pictures to the source album but they don't seem to show up when I select pictures for the book.

How do I disable my MobileMe account and add iCloud as the account for sharing photos in iPhoto?

I have been trying to email work photos from my MacBook that were downloaded from my iPhone into iPhoto. However, it states, "the server does not recognized your email/password". I had/have a MobileMe account but have transferred everything over to iCloud. Unfortunately, iCloud is not an option when trying to add the following: iPhoto>Preferences>Sharing>Email>Add Account. I thought that it would have automatically converted the information over to iCloud from MobileMe but this did not happen. How do you add iCloud as the email account for sharing photos from iPhoto?

I;m going to bump this because I've been trying to figure it out for a week on these forums...

How to put gradient effect on a 45 degree curved pipe using single object

how to put gradient effect on a 45 degree curved pipe using single object

Sudhanshu,
You may use a smooth blend between a dark/black solid fill object with the full width and a white narrow fill object in the middle.
Yoy may:
1) Create the full width object with the bend, remember to have two anchor points at the inner corner, on top of each other if it is to be sharp; you may create it with a surplus length, see below;
2) With 1) selected, Object>Path>Offset Path by a negative value equalling half the width less a point or so, to create the inner fill path, then turn it white;
3) You may ClickDrag across each end of the paths with the Line Segment Tool, then Object>Path>Divide Objects Below and delete the unwanted end parts;
4) Object>Blend>Objects, use Smooth and Align to Path;
5) Object>Blend>Make.

How to apply gradient effect to JTable

Hi
It is easier to apply gradient effect to JTable by overriding paintComponent() and giving gradient effect using the following code
Graphics2D g2 = gradientImage.createGraphics();
GradientPaint painter = new GradientPaint(0, 0, gradientEnd,
0, height, gradientStart);
g2.setPaint(painter);
Rectangle2D rect = new Rectangle2D.Double(0, 0, width, height);
g2.fill(rect);
but my problem is , after applying gradient effect the cell contents are not visible.
what i need to do to make the cells visible..... please any one help me to sort out this.....
Thanks in advance.......

Well the basic code should be:
// do gradient painting
super.paintComponent(...);But you will also need to customize the renderers to make them non-opaque.
And you may also need to make the table non-opaque.
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

How to link layers in After Effect by script?

Hi!
Is it possible to link one layer to another in After Effect by script?
I would build the custom effect with parameter like "Gradient Wipe" have: Gradient Layer.
The idea is: this connection is independent from the layer number. That mean any layers delete, re-ordering etc will not affect this connection.
Thank you in advance!

Seems I've found the way...
I've used "Layer" parameter:
But there is another question:
How to update the "old" Custom Effect in my AE projects?
The problem is:
If I'm changing the Custom Effect's content in PresetEffects.xml (adding the new parameter) then I can't load the old projects with old Custom Effect on layers.
Can I avoid this?

How to make a glow gradient in illustrator?

I made a shape and added a gradient to it, then I added a glow effect around the edges, how do I make the gradient inside of the shape match with the glow color? The glow effect is only 1 color, I want it to be a gradient like the gradient I made inside of the shape. How do I do this?

What is the color of each stop in the gradient you are using on the inside? Please provide a screenshot if that will help us understand what exactly you are trying to accomplish.
Outer glow is like a gradient, except you only define 1 color stop, and it ends at 0% opacity.

How do you make background gradient?

Hey all,
How would you make the background color a gradient effect,
such as black at the top fading toward gray at the bottom?
And also, on top of that, how would you make a rectangular
main area as your website-content area? It would almost fill the
page, but not quite- so the leftover width would be the gradient
background. The rectangular area would have a background of all
black.
Thanks!

<mock><mock>
They are the same ones who have Flash on their site. Life is
too short to
worry about those tiny things....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Alec Fehl" <[email protected]> wrote in message
news:f88b1a$kec$[email protected]..
> You mock! Hey - I know developers who name their
subfolder "img" rather
> than "images" because it saves a few bytes in their
code. Everything is
> another brick in the wall and can add up to significant
savings if you get
> a lot of hits.
>
>
> --
> Alec
> Adobe Community Expert

PS CS3 Gradient Effect

Hi there,
I'm trying to do a gradient effect on the image below. What I'd like to have is the red strip to fade in from the left to right. I'm not sure how to do this. I tried using the Gradient Effect with the transparent to color but it's not giving me the effect I want. Please help. Thanks!

Try the following.
Make your shape layer just as you did.
1. At the bottom of the layers palette, where is says FX,
   choose blending options.
2. In the blending options dialog, set the fill opacity to 0% and uncheck
    Blend interior effects as group.
3. Select the Gradient overlay and in the dropdown where it says gradient, choose
    Foreground to transparent. Adjust the options as desired. (you can move the gradient
    on image by moving it in the document window)
MTSTUNER

I'd like to add the gradient effect to my website...

I would like to add the gradient effect to my website. Is
thiis done in dw and how do i go about setting this option?
Any input or resource is greatly appreciated.
D Sterlin
(Murray I thank you advance!)

Create a sliver of your gradient image and let it tile
vertically or
horizontally to fill the page (depending on whether the
gradient is a
vertical or horizontal one).
And a posteriori, you're welcome!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dsterlinjustin" <[email protected]> wrote
in message
news:g3676c$cj5$[email protected]..
>I would like to add the gradient effect to my website. Is
thiis done in dw
>and
> how do i go about setting this option?
>
> Any input or resource is greatly appreciated.
>
> D Sterlin
>
> (Murray I thank you advance!)
>

How can i apply this glowing effect in logo with illustrator?

How can i apply this glowing effect in logo | ThemeForest Community Forums

I would make several copies of the original artwork. On each copy, section the individual areas to be gradients. It looks like you have at least four gradients, both linear and radial. It's just a matter of building each section and then reassembling each. Not too complex, yet nice piece of artwork.

How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

How do I add a video effect to multiple clips in my timeline at once?

How do I add a video effect to multiple clips in my timeline at once?

or... you can command click to select all the clips you want to apply the effect to, then double click the effect in the Effects browser. (PS - you can't simply drag and drop an effect on multiple clip selections, the effect will only be applied to the clip you drop it on -- but double clicking the effect will apply it to all selected clips at once.)

How can I create an iridescent effect in a Photoshop 3D object?

How can I create an iridescent effect in a Photoshop 3D object? I have searched everywhere for downloadable option for a mac with no luck. I'm working with CS6.

NO way. Such stuff isn't even commonly available in many 3D programs becaus it's actually pretty advanced shader stuff...
Mylenium

How do I do a gradient effect of sepia for my photo?

Similar Messages

Maybe you are looking for